--- In TekScopes@..., "jjartstor" <jj@m...> wrote:
Hello All,
I received a Tektronix Pocket Signal Generator 015-0580-00 with the
465 that I purchased. It has a scope connector on one side
and a short cable with a bnc connector on the other. I'd like to
know
what it's used for. I searched Google and found virtually no info
on
it - except a blurb in Japanese - which had no value to me.
I'm intrigued by it. If anyone knows how to use it, please clue me
in.
Best,
John
-------
John,
I have a couple of those too and I have never given it much thought
what they were used for, I would assume for demo purposes. Anyway I
find them pretty useless. First of all you must connect it to a
TEKPROBE interface (on 11k and most TDS's) to get power. I fired up
one of mine and out came a 5V squarewaves at appr. 32kHz and phase
shifted about 90 degrees.
/Zenith, Sweden
zenith5106