开云体育

Thanks! I've never understood the meaning of Peta, now I do! Great! But, I my case, it is Apprarati, not a single Apparatus to be correct in grammar of Latin. Cheers, Joe

Actually that would be very useful, for checking I haven't missed any. cheers Keith

https://www.eevblog.com/forum/testgear/replacement-knobs-feet-and-fittings-for-test-equipment/msg5740165/#msg5740165 I have posted 3D models on the EEVblog forum for the entire plug-in chassis for

Oh, btw, care to share that 3D model? I have some plugins with broken ones... (the hand was quicker than the mind: caffeine deficiency)

TTBOMK these were intended for an optical readout system that never saw the light (excuse the pun) of day...

The best is Deoxit D5. This is spray stuff but they also make a liquid. In either case apply it using a small brush, an artist's brush. Do not use a cotton swab, they tend to leave lint in the

I’ve been using compressed alcohol and a rag/toothbrush to remove the oil in all of mine, then using window cleaner to clean up what’s left. I remove all the tubes and keep them in order first

hey folks , I have a 922 that is not working on one channel . Before I go real deep in it I thought I would spend some time cleaning switch contacts as I've read that sometimes solves this issue .

Exception is the 7A21N.

The four holes accommodated blind-mate coax connectors that were used for custom modifications. For example the 7D20 was modified to accept signals from the rear of a modified mainframe. There were

I've been looking at this recently converted 7613 to check it out and hopefully improve the focus and other screen adjustments. Going through schematics I was reminded of something I saw that bothered

Hi John, I have a 502, Serial #565 that was given to me by a good friend. It's in the que to be worked and and fixed. I do, however, have a need for two cabinet latches. It uses the early style

/g/TekScopes/album?id=299577 Oh and here are the photos Benjamin

Hello people of Tekscopes, I am curious to know what the function of the four holed (socket?) is on the top of each 7000 series plug-in "mater". I've 3D modeled these maters but never the 4 holed

See EEVBLOG, 2465B teardown, 72 PAGES of gerat info. See Condor Audio , Menecham in Tel-Aviv has PSU recap kits. See A5 control board leaking SMD lytics for the complete A5 control board

Keith, If you want, I can send a photo of the parts list I used for mine that has Mouser part numbers. The list is several years old so prices and parts may not be the same. The two main filters

Perhaps ask the Vintage Tek museum if they have anything.

?ann mi?., 18. des. 2024 kl. 16:41 skrifa?i Keith via groups.io <keith= [email protected]>: The service manual describes the necessary loads for the PSU to run the boards standalone. You

Some good tips here, thank you folks. I'll start making up an order for DigiKey... May I ask one more question: Can the PSU board(s) be powered up without their outputs driving the rest of the scope

[email protected]> wrote: ^ | This! Keith, you're not exactly new here, but in this group we see a lot of repeats and we tend to go a little bit "case blind". Raymond and Mark have the good sense