开云体育

Hi Paul, It has lots of uses. Get the Tek book Time Domain Reflectrometry Measurements for insights. I use it to test every cable, connector, and adapter I buy from ham fests the Chinese, and anyone

Hi Stan, I had the same problem just yesterday on a new MG Chemicals Super Contact Cleaner I bought. On my own I figured that I would have more success by removing the nozzle. That was the case, but

I pulled a 1502 TDR out of the buck a pound box at Dayton a few years back and finally got it completely fixed the other week. I had to fab a battery pack and then fix the charging circuitry, but

Thank you all guys, for the advice... David... any particular reason why you specified "and the TB triggers OK"? I mean... the video that the owner posted...(here:

If it powers on and works and the TB triggers OK, than just buy it. Dave

I have a 7623 (not A) + 7A26 + 7B53A and I have no real complaints, though the mainframe could probably do with some attention to cure a minor display instability — probably due to dirty or loose

Hello the forum, Relevance to Forum, it is used in cleaning switches in Tektronix equipment. I bought a can of this product, 801B-125G. The spray tube just will not insert. Like many of you, I have

I have the same combination along with a big bunch of other plugins. This is a one setup that I use quite often, sometimes with a non Tek curve tracer . I have had this for many years and I think its

Decent enough, although I'm not an owner of the 7600 series. Take two or three BNC cables and a T. That ought to let you get a good view of the calibrator waveform. Swapping slots is another good

Hi Kurt, I can dig up the names of the designers of some of the Tek instruments. I may even be able to get in touch with some of them to see if they were willing to share the history of the

Hi all, again an update on the repair of my TDS540B: I was able to fix it! Today the ChipQuik arrived, and that enabled me to remove the ADC from the donor board as well as from the board of my

I'd be willing to take on the 465 and 485 for starters and go from there. I know this is solely for the options, and I know where to find those, but I'm quite curious where the MODS info is to be

Hello folks, I`m having a chance to acquire a 7623A + 7A26 + 7B53A combination. Since I will have little chance to check it onsite I would like to ask you experts, if there is any known quirks or

Thanks, point(s) taken. I’ve ordered appropriate discrete parts, should have the power supply working in a few days, and can then move on to other problems.

Hi Kurt, WOW! The 7603 page is stunning. Where do you find the time to do all of this? I would be happy to take charge of the 7854, 7A26, 7A24, 7A18, 7A16A, and the 7A25 (yes, I meant the 7A25) pages.

Ian, Delighted you have the scope fixed despite my best efforts to cause confusion. No, I am not a night owl, I live in the UK. If you browse around here and elsewhere you will find the general

"A sure way to crack a strip is to tilt your iron." So I tilted my iron and cracked a strip. I watched the video about a week to late.

I bought a scope from Mr, Schonfeld as well. I have read some really shady stories about him in this forum after I bought a scope, so this was a concern for me. My purchase was a TDS360 and it was

Another one is Yamaha, can't remember the model, it is the one SUN used. I've been attempted to try a SCSI<->SCSI80 adapter and see what happens with on of the many 15K RPM 72GB drives I have. There

IIRC, they use fvwm as the window manager and it's relatively easy to change the personality. At least once you find where they put the configuration file. It's an interesting box if you're familiar