开云体育

It's worth its weight in gold. :) Don't you wonder at its history? Tom

Interesting... Very unique. And very pricey!

It may be possible to repair this. I have a spring hook tip that has the flat type of hook that had a similar problem. I used a needle nose pliers to push the hook tip out. I found the inside end is

Interesting... Very unique.

Good points all around. I assume ibnotify() is the windows version of the linux kernel inotify? I was too deeply exposed to inotify when using and debugging icrond. It was then that something snapped

Unusual tektronix item. Does anyone know the back story?

Thanks Tom, Your suggestion about applying some oil worked perfectly on the vertical VAR pots of this 465! tom jobe...

Say what! The patent office ALLOWED a patent for that ???? That is INSANE. Talk about not allowing for prior art. Dave

FWIW you can order Analog Devices SW06GPZ online direct from Analog Devices online throught their sample program ... Regards, David Partridge

I've read the eeprom responsible for start-up check routine, who can help me decode the program? Disassembled?the contents using dz80 disassembler, but it is very weird and I don't know much about

Did you checked the supplys for ripple voltge with a scope ? If ripple if excessive the DC can look higher for your multi meter. Is adds the average AC from the ripple to the DC. Fred PA4TIM

On Tue, 19 Mar 2013, lazystrings wrote: There are even more exotic devices that are not available and worth rebuilding from discrete chips. DS1250Y is 4MByte device so no wonder it is expensive. But

Their I/O model is USB, and with it comes most of USB's gifts and problems. If you want to use it asynchronously, set up a task to poll it in the background. That way your programming sensibilities

This is opposite the usual problem of having something overloaded by a bad cap or rectifier, for example. If all of the secondaries are in the correct proportions, then look to the chopper stage. As I

Not all the Dallas Semiconductor NVRAM are available, some of them are obsolete or they are very expensive. The DS1250Y costs between $58 and $62 if is in stock. The DS1486 is not available from

In getting started troubleshooting a 2213 with low gain on one channel, I figured I should probably check the supplies just to make sure they were okay -- they aren't. They are all significantly high

I have a 7104 delay line. Each end terminates in two coax cables with peltola connectors. When I have a chance, I will terminate three ends into 50 ohms and take a look with the TDR. This delay line

Here you go

I can't find the MBRF40H45CT-E3/45 Schottky anywhere. Is there an available substitute for this?

I can't find the MBRF40H45CT-E3/45 Schottky anywhere. Is there an available substitute for this?