开云体育

Hi, Who sells the matching sockets that fit the P6137 scope probes? What is the description and part number? I intend to solder these into a pcb at the nodes where I need to make measurements but must

Bravo! Thank You! ? jerry

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the TekScopes group. File : /SMD_codes.pdf Uploaded by : udtmang <mwallace9@...>

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the TekScopes group. File : /DiffOscMeasurements.pdf Uploaded by : udtmang

I am not familiar with the 7623 (BAMA is slow downloading today) but my 7633 and 7603 use the same IC part 155-0022-00 for the vertical and horizontal amp switch so I tested by substitution. My

When you say "developed", do you mean that this is a problem that has not occurred before with this particular mainframe? Craig

I have a 496 SA s/n b010424 that was converted into a hangar queen at some point in its life. It has a mix of modules pulled from five different units. Very organized module changers worked on this

Many thanks to the Tektronix forum and for all of the terrific help received from the members. The 465 scope is now fixed. Capacitor C1419 was shorted to ground. Once the capacitor and fuse were

My 7704A does the same thing. I thought it was normal until I got a R7704 where the readout characters stay put no matter what the vertical position controls do (It's the first thing I checked on the

I have a 7623A which has developed an unusual problem. Perhaps someone in the group has dealt with this before? I have 7A18 and 7A26 vertical plug-ins, and a 7B53A timebase plug-in. The traces for

What is your location? They are around a hundred pounds... not fun to ship! BTW, I have one for sale in the Boston, MA area. Also 2 non-working 547's (one an engineering prototype), a

I am in the market for a 556 in decent condition. They are just so damn good looking!!! Anyone out here looking for a good (permanent) home for your stagnant 556?

One more to add to the heap if it hasn't been mentioned already. I watched as one of our top rework operators removed "chip" resistors, caps, inductors. She would use two irons of equal tips, heat

I was recently given a bunch of components from a 549 scope. What a beautiful piece of engineering. I was inspired to create something to help the bits live on. I built a 1 tube regenerative receiver

I just happened to think Now that I no longer have 5 extra bodies around here, I don't really need to keep their tools either I do have an extra Ungar / Weller 4624 Solder / de-solder station I could

Hi, I remember hearing of a company that used long thorns from a local bush to clear solder-filled PCB holes while heating the pad. They don't wet or conduct much heat away but are unforgiving if you

35eur special offer for one 7B53A or 7A18, "as is". Maybe not a great offer, but OK for europe i would say. <http://www.surplusasnew.de/fix/she.html> I have nothing to do with them, just saw the

I have acquired a 2235 Option 01 oscilloscope that displays the following symptoms.... 1) The "A" intensity control changes the intensity of both "A" & "B" traces...the "B" intensity control does

Yes, that's what I just did with a board from a Dyna dm2400 cnc m/c. The L295 solenoid driver ( used as a stepper driver) had gone down with a few diodes gone with it. Not having sophisticated

The best tool i have found is this one: <http://www.howardelectronics.com/den-on/sc7000.html> I would not want to work without it any more. When we got it, the first thing we tried it on was the rear