Re: Which Torx Size must I buy to refurberish someTM5000 Series Relais
|
Egge Siert, ? I don’t recall any TM500/5000 series using Torx at all. Tek uses Posi heads and hex set screws for knobs. Having said that, many HP products use Torx. The smallest Torx I have ever come across in a piece of test equipment is a T5. T8 is also a common small size. A set of T5 through T10 should cover just about everything you will come across in electronics. T15 is sometimes used for very big things. ? Dennis ?
toggle quoted message
Show quoted text
From: TekScopes@... [mailto:TekScopes@...] On Behalf Of Ken Chalfant
Sent: Thursday, September 20, 2012 8:08 PM
To: TekScopes@...
Subject: Re: [TekScopes] Which Torx Size must I buy to refurberish someTM5000 Series Relais? Greetings, I'm not exactly sure of the torx size you need. However you might wish to consider this little set available from Amazon. I have this set and it has a nice selection of small drivers including small torx. ? On 20Sep, 2012, at 7:43 AM, Egge Siert wrote:
Hi to All,
Which Torx Size must I buy to put into the very very small Torx Screws, used for the fixation of the 148-0128-03 Relais in e.g. a FG5010? Thank you in advance.
Greetings,
Egge Siert
|
