Or use this software:
Which now also includes the option of downloading the entire 2500 record
(worth 10 divisions in height) and plot it on the screen (I need to upload
that version, later today).
Didier KO4BB
toggle quoted message
Show quoted text
-----Original Message-----
From: TekScopes@...
[mailto:TekScopes@...] On Behalf Of Michael J Wallace
Sent: Thursday, October 02, 2008 11:07 PM
To: Tek Scopes
Subject: Re: [TekScopes] 7603 filter caps
I hope this goes thru ok and helps some people ...
TDS Screen Capture
via the RS-232 option
This screen image was captured from a TDS oscilloscope over
the RS-232 port using the Windows Hyperterminal program. To
transfer the screen image follow the procedure outlined below.
1. Start Hyperterminal
2. From the TDS Utility IO menu set the port to RS-232.
Harware Setup: 9600,1,none,on.
Software Setup: Soft Flagging Off.
3. Set the hard copy format. ( This image was produced using PCX )
4. Set the communications settings in Hyperterminal to match
those of the oscilloscope. 9600,8,1,None, Hardware.
5. In the Hyperterminal program, select File Properties click
on the settings tab. Click on the ASCII Setup button and
un-select Wrap lines that exceed terminal width. This will
enable the Hyperterminal program to save binary screen images.
6. Go to Transfer menu, Capture Text, and select a file name
and location.
7. Once you have the image you want on the oscilloscope
display, press the HARD COPY button.
------------------------------------
Yahoo! Groups Links
