I hope this goes thru ok and helps some people ...
TDS Screen Capture
via the RS-232 option
This screen image was captured from a TDS oscilloscope over the RS-232 port using the Windows Hyperterminal program. To transfer the screen image follow the procedure outlined below.
1. Start Hyperterminal
2. From the TDS Utility IO menu set the port to RS-232.
Harware Setup: 9600,1,none,on.
Software Setup: Soft Flagging Off.
3. Set the hard copy format. ( This image was produced using PCX )
4. Set the communications settings in Hyperterminal to match those of the oscilloscope. 9600,8,1,None, Hardware.
5. In the Hyperterminal program, select File Properties click on the settings tab. Click on the ASCII Setup button and un-select Wrap lines that exceed terminal width. This will enable the Hyperterminal program to save binary screen images.
6. Go to Transfer menu, Capture Text, and select a file name and location.
7. Once you have the image you want on the oscilloscope display, press the HARD COPY button.
