On Sun, Feb 28, 2021 at 1:07 PM EricJ via groups.io <wyzkydd2358=
[email protected]> wrote:
Replacing the relays he mentioned solved it. And yes he'll need to be
careful, the hybrid boards are made of pretty thin ceramic.
I snipped the pins of the relays individually with a good pair of flush
cutters, then de-soldered them individually. Even so it felt a little iffy,
and one of the relay pins pulled out of its solder joint on the ceramic
substrate. Maybe it was a cold joint, but you might consider cutting the
pins with a dremel or some such - some method that doesn't put a lot of
force on the pin or relay.
