Something like an RG58 crimp BNC plug and remove the outer locking ring (with extreme prejudice) looks like it would work on mine, feed the wire through the shield 'spigot' and secure with RTV or even lightly crimp it to the jacket and then a bit of heat-shrink?
toggle quoted message
Show quoted text
On 8/25/2019 7:21 AM, EJP wrote:
The plug has finally broken off the captive lead on my 7CT1N, the one that goes out to a vertical amp or time-base depending on which side you have it installed. I'm sure I'm not the first victim of this. I can obviously replace it with an ordinary BNC plug, and am doing so temporarily (I hope), but it rattles around etc., and it also has a redundant earth connection. I'm wondering if there is something more suitable, short of the unobtainium (I presume) entire 195-0095-00 assembly, that is maybe made of plastic and/or only has the inner connecting ring.
Thanks in advance
EJP
