Are there locks on the drawer slides that drop into place when you pull it all thew way out? If so you push in on them, while closing the drawer.
Michael A. Terrell
toggle quoted message
Show quoted text
-----Original Message-----
From: Jim Hill <slimjimwas@...>
Sent: Jun 29, 2018 6:53 PM
To: [email protected]
Subject: [TekScopes] K213 Instrument Cart Drawer Jammed
After many years, I attempted to open the drawer. I was successful,
but it didn't open smoothly and I cannot close it now. Looking
underneath, there is a plate covering everything but the last 3 1/2
to 4 inches at the rear of the cart. The front of the drawer is in
this gap, and I think it is hitting the plate, preventing it from
closing. Tilting the drawer up to clear doesn't help. I assume this
area allows the drawer to be removed, something like removing a file
cabinet drawer, but no luck there.
I'm guessing I'm missing something obvious, so before removing the
scope and tipping the cart over, I thought I would ask the
group. I've been retired for over 20 years, so can't go the lab and
ask one of the tech's.
Michael A. Terrell