I just checked two units, B041697 and B041608. They both have 1k 5% carbon resistors.
George
toggle quoted message
Show quoted text
On Mar 4, 2018, at 6:48 AM, Dave Daniel <kc0wjn@...> wrote:
I took a look and that's what I see. The R364 on the divider board is a 1k resistor and the manual calls out a 100 ohm resistor.
DaveD
On 3/3/2018 6:32 PM, Brian Bloom via Groups.Io wrote:
I'm replacing out-of-tolerance resistors in my 2901 time mark gen and ran across a 1k resistor where the SM says it should be 100R. The resistor in question is R364 on the divider board directly behind Q347. This isn't a model number dependent resistor, but my SN is B041433.
Does anyone have a 2901 they can pop the top on and have a look?
Thanks,
Brian
Glydeck