Re: Typo in 2901 SM or wrong value resistor?

Dave Daniel · 2018-03-04T06:48:15-08:00

I took a look and that's what I see. The R364 on the divider board is a 1k resistor and the manual calls out a 100 ohm resistor. DaveD

Dave Daniel All Messages By This Member #145240 I took a look and that's what I see. The R364 on the divider board is a 1k resistor and the manual calls out a 100 ohm resistor. DaveD toggle quoted message Show quoted text On 3/3/2018 6:32 PM, Brian Bloom via Groups.Io wrote: I'm replacing out-of-tolerance resistors in my 2901 time mark gen and ran across a 1k resistor where the SM says it should be 100R. The resistor in question is R364 on the divider board directly behind Q347. This isn't a model number dependent resistor, but my SN is B041433. Does anyone have a 2901 they can pop the top on and have a look? Thanks, Brian

Join [email protected] to automatically receive all group messages.

开云体育