开云体育

Is this the list you are thinking of? /g/SubaruVanagon/table?id=41314

I have a fresh 1980 vanagon for sale in Jax Fl 9046131884.

I have similar issues. But not for the engine. My engine is a freshly remanufactured (major overhaul right down to the toenails) EJ25 that came out of a 2005 OUTBACK. and uses an earlier year Impreza

Hi all - I should have saved this information..didn't. Some time ago (a couple, 3 months?) ago, somebody was kind enough to publish and share a list of known Subaru/Vanagon sellers, repair shops,

I used my VW flywheel lock. [image: 20210621_195813.jpg] [email protected]> wrote: -- Willie Yaconiello 970-846-7912 Willie.yaconiello@...

"Also you can use two socket extensions with a prybar or long screwdriver lodged between them while you torque the bolt." This could damage the harmonic balancer. Did when I tried it. That's why I

Codes? Kickdown? Did cat or muffler self destruct?

That universal camshaft pulley holder? from Amazon worked for me. Also you can use two socket extensions with a prybar or long screwdriver lodged between them while you torque the bolt.

Hi Brent. It’s an automatic. Kick down linkage might be a good clue - thanks! Bob BobGemmell.Com

Bob. Apologies but I don’t remember whether your van is an automatic or manual. If automatic, and you expected the kick down go get you the revs you needed (and the lower gear), and it didn’t, it

No, I was in the flat on Interstate 5 BobGemmell.Com

Mike.? I remembered that a few of our brilliant members had some ideas for handmade crankshaft pulley tools. Not hard to make.? I also remember that someone made a version from automatic garage door

Or fuel supply . Were you going uphill ? Get Outlook for iOS<https://aka.ms/o0ukef> ________________________________ Sent: Tuesday, August 27, 2024 11:33:21 AM To: [email protected]

Thanks Andy - I’ll investigate that. BobGemmell.Com

What speed sensor do you have? Have you verified it is sending speed to ECU? Andy Vanis USA and Whatsapp +1(505)

I’m experiencing a peculiar power loss on my EJ22 conversion with TransWorks transaxle. I thought I’d check in here to see if anyone has seen this behavior. While driving on the freeway I went

Re pic.... Love the shop cart! [email protected]> wrote:

Hey Mike. If your van has an automatic transmission you can also use a lever (big screwdriver) stuck through the portal on the back/left side of the Subaru engine apron. Here’s a pic of the portal

https://www.amazon.com/s?k=subaru+crank+pulley+tool&adgrpid=160097401136&hvadid=692921790632&hvdev=m&hvexpln=68&hvlocphy=9030392&hvnetw=g&hvocijid=11251610180769597504--&hvqmt=e&hvrand=112516101807695

How do you block the engine from turning when torquing the harmonic balancer 2,5 impreza NA with engine installed in 87 VANAGON gl