Re: Warren¡¯s Conversion - Wiring Harness
Grey/white is lighting I think. You need ign on (fuse it), battery (post from alt) fuse it, start signal (ign switch to ECU to starter solenoid circuit), CEL, coolant temp, oil pressure , tach (all
By
Wayne Sitarz
·
#84593
·
|
Re: ECU vs block
I think you have a 2003 2.5 NA ECU,harness and intake manifold with a swapped 2.0 (JDM?) block if it is stamped EJ20 on the block. Both the 2.5 and 2.0 ECUs look to be 4 connector and interchangeable.
By
Wayne Sitarz
·
#84592
·
|
Re: Warren¡¯s Conversion - Wiring Harness
I¡¯ve used the Smallcar diagram and Tom Shiels pages. ?I¡¯ve identified the Ignition On and Alternator Lamp wires, I think. ?However, what is the gray wire?
--
Warren
89 Westy
88 Tintop
70
By
SubieVanagon
·
#84591
·
|
Warren¡¯s Conversion - Wiring Harness
So I finally got the wiring harness through the firewall and I¡¯m about to embark on connecting it to the main harness. ?I think once the engine is installed it will be easy enough to know what
By
SubieVanagon
·
#84590
·
|
Re: ECU vs block
I did a lookup on your vin and your ecu number.
Here¡¯s the info that came back¡..
This part fits
2003 Subaru Impreza or Impreza WRX (VIN: JF1GD67583H503164)S - SEDAN; 251 - 4 Cyl 2.5L SOHC EMPI
By
Brent Weide
·
#84589
·
|
Re: ECU vs block
It's 22611-AJ020...
Does that last part imply it is indeed intended for an EJ20?
The original vehicle serial number is written on by hand; it is
JF1GD67583H503164 and then also written there is 2003
By
wallaces_21
·
#84588
·
|
Re: ECU vs block
What would the PN be on the ECU itself (22611-xxxxx kind of number)
Also what market are you in? different markets have different ways of doing thing. Plus i've seen Subaru ECUs listed for both the
By
Kevin
·
#84587
·
|
Re: ECU vs block
If no codes, I would roll with it.
--
Warren
89 Westy
88 Tintop
70 Westy
By
SubieVanagon
·
#84586
·
|
Re: Warren¡¯s Conversion - Engine Bay
Last night I wrestled with the wiring harness trying to get through the small existing hole through which the original VW harness passed through the firewall. ?After several hours, I took a break for
By
SubieVanagon
·
#84585
·
|
Re: ECU vs block
It's running really well. It's more that I want to know what I'm dealing
with in case something happens.
[email protected]> wrote:
By
wallaces_21
·
#84584
·
|
Re: Looking for a motor
Even better if you¡¯re out that way. ?No shipping, no tax.
--
Warren
89 Westy
88 Tintop
70 Westy
By
SubieVanagon
·
#84583
·
|
Re: ECU vs block
What's wrong with it? Codes?
By
Wayne Sitarz
·
#84582
·
|
Re: ECU vs block
I want to get in touch with the guy who did the conversion to discuss;
hopefully he can shed some light on it if he remembers or kept records but
we don¡¯t speak each other¡¯s language so it needs
By
wallaces_21
·
#84581
·
|
Re: Looking for a motor
A couple hundred for shipping (and sales tax if your delivery state charges
days tax).
I bought my here a few years ago and picked up while in a road trip to OR,
no tax no shipping.
By
ANDREW
·
#84580
·
|
Re: Looking for a motor
Subarupartsdeal.com
--
Warren
89 Westy
88 Tintop
70 Westy
By
SubieVanagon
·
#84579
·
|
Re: Looking for a motor
I have a 09 2.5 w 80K miles with COMPLETE SC Vanagon installation--motor
mount, wiring all tagged, intake--bolt in. New heads, T Belt, SS head
gaskets with ARP studs, etc. It was removed from my van
By
Bindu Miller
·
#84578
·
|
Re: Looking for a motor
Do you have a recommended seller?
By
James Neumeister
·
#84577
·
|
Re: ECU vs block
Maybe? non-turbo ECU and intake for the 2003 2.5, with a swapped JDM 2.0 short/long block?
By
Wayne Sitarz
·
#84576
·
|
Re: Looking for a motor
New 2.5 shortblock is like $2k. Buy it in OR, no sales tax. Plug and play.
Andy Vanis
505-304-5306 USA and WhatsApp
[email protected]> wrote:
By
ANDREW
·
#84575
·
|
Re: ECU vs block
I do not have a turbo. When I looked up the ECU number it indicated it's
for a 2.5 but I may have misquoted the year in my original post.
(I got the filter sorted; I've ordered a Baldwin B1400 which
By
wallaces_21
·
#84574
·
|