开云体育

Things like that are why I said we shouldn't get rid of the lantern tool posts. I bought the AXA because it was cheap, I could get it fast, and I didn't have a complete lantern tool post, either. I'd

I'd have to see the set up. With the KDK you can turn the base any angle on the compound and the holders flip, so a left hand becomes a right hand. Also there are a variety of holders and shapes. If I

??? ??? One of the nice things about the 38 different angles you can set the tool at on a multi-fix? . Lets say you have squared your tool post with your chuck & you do a bunch or turning &

So did you buy one ? Dave

I thought that you all maybe interested in see the install AXA tool holder on my SB9.? Thank you for all your input.

I’m looking for a nice reasonably priced milling attachment for my refurbished tool room lathe. eBay prices are obscene and I do know the pros and cons of these units. I have a clausing mill but for

I have one I’d be willing to sell.

You can use your Aloris tool post for milling keys ways. It can do other milling to the dovetail and be adjusted up and down for milling. Dave

Did you find your milling attachment?

This is the second time I have posted this request for a milling attachment and the replies were posted on a different email address that I didn't check.? So I'll try again with the other email

I am in the process of doing a rebuild on a SB 9 UMD. There is a bracket behind the upper part of the UMD unit. My bracket is broken and the broken piece is gone. Mine has a hole in it that has a

Can you post a photo of location and part. It sounds like the safety lock bracket which is week and noe one replace the part. Dave

Dave, I don’t know what you are talking about, maybe you could send me a pic of what you are talking about and where it might go, I will try to help, Joe Sent: Saturday, October 22, 2022 5:58

It hard location to take a good photo. I have had more one UMD and see when still on lathe but off you could not see anything. Mind is a clean break on backside and I can feel it missing but can get a

You see the part AS2607NK2 in file section under parts. Dave

??? ??? Theres a guy over on the Practical Machinist forum that did some trick stuff? to have the counter shaft take up less table? space . He did a pretty nice job which I have been thinking

That's interesting. Thanks

I had a bench 9A . I used a DC motor and Grove the large pully for v belt directly to the motor to head stock. The DC motor gave me 100 to speed and 1 hp to keep torque up at lower speed. Today I

Hi everybody,thanks for letting me join.I don't own a South Bend but I have been looking into stepping up from my 6" craftsman (Atlas).The South Bends definitely interest me but I'm not familiar with

Speaking as a guy who owns an Atlas TH42 and a South Bend Heavy 10L in need of a great deal of restoration after spending at least 5 years in a leaky barn, and having used South Bend 9" lathes in a