开云体育

Automotive flat belts for lathes

mikemm58 All Messages By This Member #108491 Thanks for the replys. I guess my main question would be the type of adhesive to use.?? Also, I'm not sure if i have the ability to cut an even taper on both ends, so I thought a stepped lap joint would work (??)?? (How much overlap should be good?) The Duralast info states the material is rubber. Come to think of it... any reason Clipper links wouldn't work? Would they rip thru the material when under tension? Mike toggle quoted message Show quoted text On Sat, Dec 28, 2024 at 5:33 PM, lance via groups.io <gbof@...> wrote: I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex?? Lance On Dec 28, 2024, at 7:12 PM, mikemm58 via <mmcauley@...> wrote: Hello, ? Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.? ? I just bought a Duralast #750K7 (7PK1905) and before I cut it and try to glue together, has anyone had prior success? ? Thanks...! ? Mike
mikemm58 All Messages By This Member #108490 Thanks for the replys. I guess my main question would be the type of adhesive to use.?? Also, I'm not sure if i have the ability to cut an even taper on both ends, so I thought a stepped lap joint would work (??)?? (How much overlap should be good?) The Duralast info states the material is rubber. Mike toggle quoted message Show quoted text On Sat, Dec 28, 2024 at 5:33 PM, lance via groups.io <gbof@...> wrote: I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex?? Lance On Dec 28, 2024, at 7:12 PM, mikemm58 via <mmcauley@...> wrote: Hello, ? Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.? ? I just bought a Duralast #750K7 (7PK1905) and before I cut it and try to glue together, has anyone had prior success? ? Thanks...! ? Mike
lance All Messages By This Member #108489 开云体育 I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex?? Lance toggle quoted message Show quoted text On Dec 28, 2024, at 7:12 PM, mikemm58 via <mmcauley@...> wrote: Hello, ? Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.? ? I just bought a Duralast #750K7 (7PK1905) and before I cut it and try to glue together, has anyone had prior success? ? Thanks...! ? Mike
Jim_B All Messages By This Member #108488 开云体育 I used one for years. ? I seem to remember days on the South Bend Heavy 10 site.? Jim B, toggle quoted message Show quoted text On Dec 28, 2024, at 7:12?PM, mikemm58 via groups.io <mmcauley@...> wrote: ? Hello, ? Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.? ? I just bought a Duralast #750K7 (7PK1905) and before I cut it and try to glue together, has anyone had prior success? ? Thanks...! ? Mike -- Jim B
mikemm58 All Messages By This Member #108487 Hello, ? Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.? ? I just bought a Duralast #750K7 (7PK1905) and before I cut it and try to glue together, has anyone had prior success? ? Thanks...! ? Mike

Previous Topic Next Topic