Thanks for the replys. I guess my main question would be the type of adhesive to use.??
Also, I'm not sure if i have the ability to cut an even taper on both ends, so I thought a stepped lap joint would work (??)??
(How much overlap should be good?)
The Duralast info states the material is rubber.
Mike
On Sat, Dec 28, 2024 at 5:33 PM, lance via groups.io
<gbof@...> wrote:
I used one for years on my 16” SBL.
Cut on a taper. Use a belt sander to make opposing tapers on the belt
Glue, overlap the taper belt edges, clamp and let sit overnight.
I forget what glue I used, might have Been Permatex??
Lance
On Dec 28, 2024, at 7:12 PM, mikemm58 via <
mmcauley@...> wrote:
Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
