You can make your own using those lapidary disc's. Cut their diameter to size and mount them on a steel disk using neodymium magnets.
toggle quoted message
Show quoted text
This is the only source of a Leonard Grind-R-Lap replacement?platee I could find.?
??? A KISS machine? . nice & simple
??? thanks
??? animal
On 12/28/24 9:43 PM, Andrei via wrote:
I have one of these Leonard grinder-lap machines and it is awesome.
Uses 5-inch magnet based diamond wheels, runs at about 350 rpm and has an eccentric to make it wobble a little.
Awesome for sharpening and polishing lathe tools and carbide inserts.??
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike Poore via wrote:
Thank you for the replies. I will be researching the nickel plating process now that I know it is done commercially. No one makes replacement grinding plates for this machine. I have searched all of the obvious places. Not sure when
they quit making it, but it is perfectly designed to grind lathe/shaper cutting tools. I will try to post a picture tomorrow.
On 12/28/2024 10:43 AM, Mike Poore via wrote:
This is a tangential topic at best. The question is does anyone know of a way to bond diamond grit to a steel plate? I am thinking about experimenting with general purpose epoxy. However they bond brake linings could work, but I do not know how. Regular
epoxy seems like it would fail as the plate heated, but the brake lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that uses steel discs with bonded diamond grit on the flat side of the disc. It would be perfect for HSS or carbide sharpening given its adjustable angle work table. The problem is that the abrasive plates
are not available any more. Self-adhering sanding discs are an option, but not preferable.
|
This is the only source of a Leonard Grind-R-Lap replacement?platee I could find.?
??? A KISS machine? . nice & simple
??? thanks
??? animal
On 12/28/24 9:43 PM, Andrei via
wrote:
I have one of these Leonard grinder-lap machines
and it is awesome.
Uses 5-inch magnet based diamond wheels, runs at
about 350 rpm and has an eccentric to make it wobble a little.
Awesome for sharpening and polishing lathe tools
and carbide inserts.??
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike
Poore via wrote:
Thank you for the replies. I will be
researching the nickel plating process now that I know it is
done commercially. No one makes replacement grinding plates
for this machine. I have searched all of the obvious places.
Not sure when they quit making it, but it is perfectly
designed to grind lathe/shaper cutting tools. I will try to
post a picture tomorrow.
On 12/28/2024 10:43 AM,
Mike Poore via wrote:
This is a tangential topic at best. The question is
does anyone know of a way to bond diamond grit to a
steel plate? I am thinking about experimenting with
general purpose epoxy. However they bond brake linings
could work, but I do not know how. Regular epoxy seems
like it would fail as the plate heated, but the brake
lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that
uses steel discs with bonded diamond grit on the flat
side of the disc. It would be perfect for HSS or carbide
sharpening given its adjustable angle work table. The
problem is that the abrasive plates are not available
any more. Self-adhering sanding discs are an option, but
not preferable.
|
??? A KISS machine? . nice & simple
??? thanks
??? animal
On 12/28/24 9:43 PM, Andrei via
groups.io wrote:
toggle quoted message
Show quoted text
I have one of these Leonard grinder-lap machines
and it is awesome.
Uses 5-inch magnet based diamond wheels, runs at
about 350 rpm and has an eccentric to make it wobble a little.
Awesome for sharpening and polishing lathe tools
and carbide inserts.??
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike
Poore via groups.io wrote:
Thank you for the replies. I will be
researching the nickel plating process now that I know it is
done commercially. No one makes replacement grinding plates
for this machine. I have searched all of the obvious places.
Not sure when they quit making it, but it is perfectly
designed to grind lathe/shaper cutting tools. I will try to
post a picture tomorrow.
On 12/28/2024 10:43 AM,
Mike Poore via groups.io wrote:
This is a tangential topic at best. The question is
does anyone know of a way to bond diamond grit to a
steel plate? I am thinking about experimenting with
general purpose epoxy. However they bond brake linings
could work, but I do not know how. Regular epoxy seems
like it would fail as the plate heated, but the brake
lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that
uses steel discs with bonded diamond grit on the flat
side of the disc. It would be perfect for HSS or carbide
sharpening given its adjustable angle work table. The
problem is that the abrasive plates are not available
any more. Self-adhering sanding discs are an option, but
not preferable.
|
toggle quoted message
Show quoted text
I have one of these Leonard grinder-lap machines and it is awesome.
Uses 5-inch magnet based diamond wheels, runs at about 350 rpm and has an eccentric to make it wobble a little.
Awesome for sharpening and polishing lathe tools and carbide inserts.??
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike Poore via groups.io wrote:
Thank you for the replies. I will be researching the nickel plating process now that I know it is done commercially. No one makes replacement grinding plates for this machine. I have searched all of the obvious places. Not sure when
they quit making it, but it is perfectly designed to grind lathe/shaper cutting tools. I will try to post a picture tomorrow.
On 12/28/2024 10:43 AM, Mike Poore via groups.io wrote:
This is a tangential topic at best. The question is does anyone know of a way to bond diamond grit to a steel plate? I am thinking about experimenting with general purpose epoxy. However they bond brake linings could work, but I do not know how. Regular
epoxy seems like it would fail as the plate heated, but the brake lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that uses steel discs with bonded diamond grit on the flat side of the disc. It would be perfect for HSS or carbide sharpening given its adjustable angle work table. The problem is that the abrasive plates
are not available any more. Self-adhering sanding discs are an option, but not preferable.
|
I have one of these Leonard grinder-lap machines and it is awesome.
Uses 5-inch magnet based diamond wheels, runs at about 350 rpm and has an eccentric to make it wobble a little.
Awesome for sharpening and polishing lathe tools and carbide inserts.??
toggle quoted message
Show quoted text
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike Poore via groups.io wrote:
Thank you for the replies. I will be researching the nickel plating process now that I know it is done commercially. No one makes replacement grinding plates for this machine. I have searched all of the obvious places. Not sure when
they quit making it, but it is perfectly designed to grind lathe/shaper cutting tools. I will try to post a picture tomorrow.
On 12/28/2024 10:43 AM, Mike Poore via groups.io wrote:
This is a tangential topic at best. The question is does anyone know of a way to bond diamond grit to a steel plate? I am thinking about experimenting with general purpose epoxy. However they bond brake linings could work, but I do not know how. Regular
epoxy seems like it would fail as the plate heated, but the brake lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that uses steel discs with bonded diamond grit on the flat side of the disc. It would be perfect for HSS or carbide sharpening given its adjustable angle work table. The problem is that the abrasive plates
are not available any more. Self-adhering sanding discs are an option, but not preferable.
|
??? What kind of machine is it ?
??? thanks
??? animal
On 12/28/24 9:22 PM, Mike Poore via
groups.io wrote:
toggle quoted message
Show quoted text
Thank you for the replies. I will be researching the nickel
plating process now that I know it is done commercially. No one
makes replacement grinding plates for this machine. I have
searched all of the obvious places. Not sure when they quit making
it, but it is perfectly designed to grind lathe/shaper cutting
tools. I will try to post a picture tomorrow.
On 12/28/2024 10:43 AM, Mike Poore
via groups.io wrote:
This is a tangential topic at best. The question is does
anyone know of a way to bond diamond grit to a steel plate? I
am thinking about experimenting with general purpose epoxy.
However they bond brake linings could work, but I do not know
how. Regular epoxy seems like it would fail as the plate
heated, but the brake lining adhesive should be more than
adequate.
?
Background: I have a 1950's era grinding machine that uses
steel discs with bonded diamond grit on the flat side of the
disc. It would be perfect for HSS or carbide sharpening given
its adjustable angle work table. The problem is that the
abrasive plates are not available any more. Self-adhering
sanding discs are an option, but not preferable.
|
Thank you for the replies. I will be researching the nickel plating
process now that I know it is done commercially. No one makes
replacement grinding plates for this machine. I have searched all of
the obvious places. Not sure when they quit making it, but it is
perfectly designed to grind lathe/shaper cutting tools. I will try
to post a picture tomorrow.
On 12/28/2024 10:43 AM, Mike Poore via
groups.io wrote:
toggle quoted message
Show quoted text
This is a tangential topic at best. The question is does
anyone know of a way to bond diamond grit to a steel plate? I am
thinking about experimenting with general purpose epoxy. However
they bond brake linings could work, but I do not know how.
Regular epoxy seems like it would fail as the plate heated, but
the brake lining adhesive should be more than adequate.
?
Background: I have a 1950's era grinding machine that uses
steel discs with bonded diamond grit on the flat side of the
disc. It would be perfect for HSS or carbide sharpening given
its adjustable angle work table. The problem is that the
abrasive plates are not available any more. Self-adhering
sanding discs are an option, but not preferable.
|
Re: Automotive flat belts for lathes
Thanks for the replys. I guess my main question would be the type of adhesive to use.??
Also, I'm not sure if i have the ability to cut an even taper on both ends, so I thought a stepped lap joint would work (??)??
(How much overlap should be good?)
The Duralast info states the material is rubber.
Come to think of it... any reason Clipper links wouldn't work? Would they rip thru the material when under tension?
Mike
On Sat, Dec 28, 2024 at 5:33 PM, lance via groups.io <gbof@...> wrote: I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex??
Lance On Dec 28, 2024, at 7:12 PM, mikemm58 via < mmcauley@...> wrote:
Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
|
Re: Automotive flat belts for lathes
Thanks for the replys. I guess my main question would be the type of adhesive to use.??
Also, I'm not sure if i have the ability to cut an even taper on both ends, so I thought a stepped lap joint would work (??)??
(How much overlap should be good?)
The Duralast info states the material is rubber.
Mike
On Sat, Dec 28, 2024 at 5:33 PM, lance via groups.io <gbof@...> wrote: I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex??
Lance On Dec 28, 2024, at 7:12 PM, mikemm58 via < mmcauley@...> wrote:
Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
|
Re: Automotive flat belts for lathes
I used one for years on my 16” SBL. Cut on a taper. Use a belt sander to make opposing tapers on the belt Glue, overlap the taper belt edges, clamp and let sit overnight. I forget what glue I used, might have Been Permatex??
Lance
toggle quoted message
Show quoted text
On Dec 28, 2024, at 7:12 PM, mikemm58 via < mmcauley@...> wrote:
Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
|
Re: Automotive flat belts for lathes
I used one for years. ? I seem to remember days on the South Bend Heavy 10 site.?
toggle quoted message
Show quoted text
On Dec 28, 2024, at 7:12?PM, mikemm58 via groups.io <mmcauley@...> wrote:
? Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
--
Jim B
|
Automotive flat belts for lathes
Hello,
?
Wondering if automotive flat belts (grooved serpentine type) can be put to use as a drive belt for my 10L.?
?
I just bought a Duralast #750K7 (7PK1905)
and before I cut it and try to glue together, has anyone had prior success?
?
Thanks...!
?
Mike
|
Got 25 pages downloaded. Has exactly the info I am looking for. Thanks very much!
Thanks.
![image]()
This is from the 1913 SB catalogue available on Steve Wells site? The 1 in front of the 34 deals with mounting.?
? I recently acquired a 1913 southbend 13x8 gap bed lathe, cataloge number 134. I am looking for any printed material pertaining to it. Can anyone help?
--
Jim B
|
toggle quoted message
Show quoted text
This is from the 1913 SB catalogue available on Steve Wells site? The 1 in front of the 34 deals with mounting.?
? I recently acquired a 1913 southbend 13x8 gap bed lathe, cataloge number 134. I am looking for any printed material pertaining to it. Can anyone help?
--
Jim B
|
If you’re looking for operating instructions find an early HTRL in the files section. ?
toggle quoted message
Show quoted text
On Dec 28, 2024, at 5:34?PM, jay slattery via groups.io <slattjj56@...> wrote:
? I recently acquired a 1913 southbend 13x8 gap bed lathe, cataloge number 134. I am looking for any printed material pertaining to it. Can anyone help?
--
Jim B
|
This is from the 1913 SB catalogue available on Steve Wells site? The 1 in front of the 34 deals with mounting.?
toggle quoted message
Show quoted text
On Dec 28, 2024, at 5:34?PM, jay slattery via groups.io <slattjj56@...> wrote:
? I recently acquired a 1913 southbend 13x8 gap bed lathe, cataloge number 134. I am looking for any printed material pertaining to it. Can anyone help?
--
Jim B
|
I recently acquired a 1913 southbend 13x8 gap bed lathe, cataloge number 134. I am looking for any printed material pertaining to it. Can anyone help?
|
??? Yea , that was my thought hitting up a lapidary place . I
have a couple small rock saws & one has a grinding wheel on
one outboard side with a diamond wheel . I just went out &
looked? sorry no name on either the grinding wheel or the saw
blade . But their still using diamond wheels? today so I know
their out there . Ya may be able to get by using a diamond blade
with some backing & when it fizzles out just flip the blade
over to the fresh side ?
please keep us posted on what ya end up with .
animal
On 12/28/24 10:31 AM, Andrei via
groups.io wrote:
toggle quoted message
Show quoted text
Ebay has a lot of grinding materials for lapidary
processing. All sorts of grits are available, up to about 3,000.
You can start browsing with this example and see
if it is useful:
|
|
James Rice
Jim_B
