开云体育

Jorgen, Have the upholstery company use stainless staples or the headliner could eventually begin to bleed rust.

David, You weren’t stirring the pot. This is merely “lively conversation”. I always try to look at both sides to evaluate what works for me so y’ll just got a peek into my brain! Allison

I am in the middle of a headliner replacement project for my 2001 S452. Removed almost all plywood panels from the ceiling where the vinyl (NAUGAHYDE) material is attached (on top of 1/8 thin foam). I

Does anyone know what brand door latch assembly Sabre used on the 452 doors? Also, potential sources for the assembly? A pin fell out of the brass square latch assembly and the mechanism does not

Our Sabre is on a mooring 9 months out of the year. I'm a K.I.S.S. kind of person. We don't keep anything on when we're gone except the high level bilge pump. I read somewhere that if you have a

Thanks Tim. I found some on Amazon that arrived last night that look like they will fit and are promoted as replacements for puck lights. It seems all the LED bulbs are at a minimum 0.3” longer

Alison, I didn't say it, but marelon or similar seacocks are wonderful products and to each their own. ?Agree that paying the yard to do the yearly maintenance on the Spartans quickly adds up. ?The

David, A case can be made for either one you talk about never replacing your true holes again, but what is your labor worth every time you service them if you don’t value your labor then you’re

Jon, I can't stop myself from a snarky comment. ?Those of us who still have Spartans, will never need any spares! ?I fully understand the allure of no maintenance, though I would rather spend my

I've been to Scituate a dozen of times without a problem.? And there is no reasonable alternative.? Cohasset is nice, but not deep keel friendly (and the town is unreasonably greedy).

Avoid Situate unless you can be assured a mooring well in the back of the harbor. If your facing the mouth you’ll rock and roll all night

If you don’t already have it, I recommend getting a copy of the Eldridge Tide and Pilot for planning your trip. From: [email protected] <[email protected]> on behalf of David Lochner

Hi Julius, I have a 1990 34 MkII so our teak & holly are probably similar. I was not able to find teak & holly that matches the original one on my boat. Granted my piece was 1' X 1' but the concept

I just looked at the Edensaw Woods (Port Townsend) website, and they show teak and holly veneer in several thicknesses. Are they out of stock? Dave Castor Port Angeles, Wash 1986 S32

I just replaced seven of my through-hulls and seacocks with the Tru Design units and could not be happier. The action is massively superior, and the rated strength (500 #'s lateral load?) is very

I bought these on Amazon in 2021 to replace the halogen bulbs in the overhead light fittings. ?They're still working. *** KINDEEP G4 LED Bulb, Bi-Pin Base, 20W Halogen Bulb Equivalent,

Manchester is great little harbor. Be amazed at how many boats can be moored in such a little place. Dave Second Star S362 #113 Fair Haven, NY/Lake Ontario

General woodcraft in New LondonChanges in Latitude1988 Sabre 42 #38Guilford, CT

I second the Manchester stop.

Not to hijack the thread, but any sources near Delaware/Philadelphia area?