开云体育

Lst year replaced my centerboard cable with Dyneema.? SO far , so good? ? ?BUT ater thoroughly clearing all barnacles, and crud, it still seems to get stuck if I crank all the way up.? Had it in

It always has a surface charge when we show up, so initially it is 13.0-13.5v. If we turn on a load for a few minutes it settles down to 12.6-12.8. The 4D FLA is going strong on season 4. We were

That’s very interesting and informative. Thanks. . Did a search and found the info : “Do I always need a charge controller? Not always, but usually. Generally, there is no need for a charge

There are too many Davids and Brians. In an early post I thought we were talking about Brian’s (Nauset Beach) new LFP installation. For small wattage solar panels the Victron Controllers are not a

That’s great Jim. I had one of the first gen till the old non LI batteries died. The owner/founder was a Sonicare engineer. Good fellow. We need more power and bought the new Torquedo 3 hp.

Not much of a war when Allison and I start on the same side. On a completely different subject, I decided to buy an EP Carry, though to fudge I'm keeping my 6 HP Mercury 4 stroke on the rail. One

Yes. Those are my choice as well. Definitely should have a controller. Tony Tony Billera tony.billera@... 206 605 2650 linkedin.com/in/tonybillera Please consider the environment before printing

MPPT unit from Victron works great.

Yeah, but I'm getting old and war becomes less and less appealing! Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax: 510.860.4640 ?

Hi Julius, Not sure if you’ve tried these people, I have been dealing with them for several years and have been happy with their service

Thanks Dave, but I was interested in battery voltage from the perspective of overcharging. The only downside I see from Brian’s system is the possibility of overcharging the battery. The 10 W panel

Joe, Battery voltage for a LFP battery is not a good indicator of SOC as the discharge curve is very flat. That’s one of the advantages of LFP, it provides the same voltage throughout the entire

Brian- That’s very interesting. Do you know what the battery voltage typically is at the end of a charge cycle, ie sunny day and you get back on the boat after a week? Joe -- Joe Cleary Kestrel?

C’mon Allison it’s been a while since we had a good old fashioned all out war.

I my experience the only stainless ones available are Monel. They may charge you extra but it is worth it as you NEVER want to revisit this! Allison Lehman Swiftsure Yachts allison@...

EXCELLENT point! I will tell them. Thank You!

Jorgen, Have the upholstery company use stainless staples or the headliner could eventually begin to bleed rust.

David, You weren’t stirring the pot. This is merely “lively conversation”. I always try to look at both sides to evaluate what works for me so y’ll just got a peek into my brain! Allison

I am in the middle of a headliner replacement project for my 2001 S452. Removed almost all plywood panels from the ceiling where the vinyl (NAUGAHYDE) material is attached (on top of 1/8 thin foam). I

Does anyone know what brand door latch assembly Sabre used on the 452 doors? Also, potential sources for the assembly? A pin fell out of the brass square latch assembly and the mechanism does not