开云体育

Well it seems the Spade distributor is out of stock on the Spade 100, and with the Tariffs he's not sure when if ever he would have them. He mentioned the supplier expects 104% on the next order! Doug

Hello, Update on this thread. I talked to Glen at Sabre and he said they originally used Nautilus Marine Fabrication in Maine to make all the chainplates. Contacted Nautilus and they said they can

I have a 20kg Ronca Vulcan on our S362 with 50ft of 3/8 chain and 200ft of triple braid.? I love the? anchor holding and (almost) never worry about it, but the storage on the bow roller is not

mixed or mixed up?

I’m a big fan of spade. I’ve had a 33lb (80?) model on my 34 for years. Held the boat in 40 knot winds. 40 ft 5/16 chain and 300 ft line. Had some corrosion problems after about 7 years and the

Not sure if you mean my repair Aaron but that is 1/4” teak and Holly ply. I added a stencil hand painted with the compass rose. Then sealed with epoxy and Varnish. -- Stephanie Moderator Sabre 36,

Here are a couple of more angles for your convienance [IMG_6613.jpeg][IMG_6606.jpeg] Randy Drummond S/V Dazzle S38mk2 206 Miami

Probably so. I don’t remember where this one came from but I know I didn’t have to look far. I experimented with a couple to see which did the best job and this one won. Randy Drummond S/V Dazzle

looks like one of the many rollers available from trailer parts suppliers

Yes the roller was off the shelf and I just made a cardboard pattern for cutting the aluminum. Randy Drummond S/V Dazzle S38mk2 206 Miami

Please do. I’m very happy with the results. 1/4’ anodized aluminum plate from mcmaster Carr and three bolts. Randy Drummond S/V Dazzle S38mk2 206 Miami

Randy I like it! We have the same thing going on with our Rocna and the Harken drum. Was that an off the shelf roller? Len Walkabout S38mkii

nice - I might just have to copy that

This is what we did to keep from hitting the furler. It also was a help in keeping the anchor in place when heading into waves. [IMG_4004.jpeg] Randy Drummond S/V Dazzle S38mk2 206 Miami

Thanks All! Much appreciate the feedback. Ned Bennett -- Triona Sabre 362 #132 Sachems' Head Ct

Ditto for us I had Indalo Rigging install the Furlex.? She had some comment regarding Furlex providing better clearance than a Harken, but I'm not totally clear on that.

The issue isn’t a swivel which we don’t have. The Spade has a high arch in the shank, if it clears the roller too quickly the arch comes back and up and rubs agains the bottom of the furler. If I

Dave do you use a swivel? We do with a section of chain between the swivel and the anchor shank. This allows the swivel to work and not get side-loaded (the cause of most swivel failures). We too hit

This is in line with what I was thinking, nice to see the pictures laid out. Did you just paint the floor afterwards?? Looks like it got? a facelift. Aaron R Sabre 28-28 Hull 308

We have a 44 lbs Spade on 140’ chain and 150 feet of 8 plait. Have never had a problem setting the anchor, except in conditions that no anchor would set, shallow sand over limestone, sunken canvass,