开云体育

To close out this year old thread, I’ve finally been able to take a picture showing the end result. I also got window covers for the dodger and a connector to join the dodger to the Bimini. -- Jeff

I did ours on a stop over in Kona before heading south to Tahiti it was therapeutic like knitting;) Keep in mind the stitch should look like on a baseball stitch once I got the hang of it, it was fun.

Dave, I don’t know what you are talking about (coming from the 5’ woman) You should watch where you are going ? Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800

The 426 is much higher. Our 6'+ friends don’t have any problems Allison Lehman Swiftsure Yachts allison@... Cell: 510.912.5800 Fax: 510.860.4640 ?

I've researched this issue and there are very high scores for the General Ecology systems.? I narrowed it down to Seagull IV and the Nature Pure.? There is a $200 plus difference between the two.?

I need that!

Bigger boat or one of these https://www.ergodyne.com/skullerz-8945-universal-bump-cap-insert.html Bill Kellner S32 “Throwback “Sandusky Ohio [email protected]> wrote:

My wife, who is much shorter than I am, has a habit of sliding the companionway hatch back far enough for her to leave the cabin. When I leave after her I invariable hit my head on the partially open

Thanks for the chuckle, when I had my 362 I constantly whacked my baseball cap covered head on the companion way door frames. Good times! Happy to hear I’m not the only one! Bill Former Sabre 362

I love my 362 but one persistent issue is that the headroom through the doorways into the fwd and aft staterooms is about 5'11"-6' which is 1" lower than the top of my head. Somehow I still haven't

Thanks much everyone for your tips and the video link. Very helpful. [email protected]> wrote:

I can get all my wires out of my mast through the inspection plate cover. It is not terribly easy, especially the vhf, but it can be done. Worth noting is I do not have a junction box, I have a

Two hours both times I've done it. They lasted about 10 years in Lake Michigan when covered for the winter. I agree it's important to use the tape to keep the leather from creeping off center as you

https://youtu.be/FHTuLV1L1tg?si=V-xJo717_Qu_kLL8 [email protected]> wrote:

Anybody have luck pulling wiring junction boxes out through the inspection plate? Coax is accessible. Trying to do this with mast up. Anchor and steaming lights not working, wind transducer is

Love my Beta. They put a lot thought into maintenance points. -- Phil Horn S34 #67 Huntington, LI, NY

It took me about two hours. It's slow at first but as you get going it gets quicker, at least it did for me. You definitely want to remove the wheel and I found the easiest way to stitch was with the

Same as Allison. I put a broom handle across two kitchen chair backs and did it over a couple of evenings in front of the tv. Wear a glove on your pulling hand and I used a crab mallet as a mini

A lot! We brought our wheel home and UI did it in front of the TV. I took two nights but it was because my hands would fatigue and it was the first time I did it. Allison Lehman Swiftsure Yachts

Those with experience please estimate the number of hours to sew on a 40" leather wheel cover from Boatleather inc. I'm a newbie with needle and thread but competent with hand tools. Thanks!