开云体育

I have attempted to connect to that node from two of my nodes that are on different networks and I could not connect either. I would see if the owner of 48579 would consider a reboot of his node to

Thanks Steve... I am using AllScan for the most part. I have tried the DTMF method which gives the same results. DTMF works fine for other nodes. MJ [email protected]> wrote:

Are you connecting using DTMF?? If so, have you verified that DTMF is decoding correctly?? Can you connect using Supermon? Also, I would like to remind our SHARI users that our recommended settings

I'm not sure this is an appropriate issue for this group, but I have to start somewhere.... redirect prod's are welcome. I've got a SHARI node which has been stellar for the past year.? I like to

The following items have been updated in the Files area of the [email protected] group. * /ASL3/Kits 4 Hams suggested SHARI settings for ASL3 in text format v1.04.pdf (

I never bothered writing anything with sa818-menu program on ASL3, so that program just comes up with default blank values on my node. However, the radio was programmed already in HAMVOIP. The only

He corrected me, he has a T-MOBILE gateway/modem. But I suppose that the issue is still that he cannot open the port that he needs. Glen, WB4KTF

If he is using Verizon he likely doesn’t have a public facing ip address and is behind a double nat which will not allow direct incoming connections. Outbound will work fine. [email protected]>

You could try a vpn that will allow you to open ports. Ed

Make sure your default port of 4569 is open on port forwarding in your router to allow inbound connections [email protected]> wrote:

My friend with a SHARI Allstar can connect to a "group" Node and we can talk through that node, but he cannot connect directly to my SHARI node at home.? I also cannot connect to his SHARI node at

BINGO! Thanks for posting that little CTCSSFROM tidbit for the SHARI pi-hat. I too was attempting to load an ASL image onto a Pi-4 and was having issues. I knew that it had something to do with the

It was set to USBINVERT and I changed it to no. Since I turned it on tonight its not even transmitting so I'm not sure whats going on. The serial port is set as default, but I'm not sure if its

It was an idea that I did not examine thoroughly.? Ended up he had DCS on both TX and RX.? I am trying to create an RF link to it to get it on Allstar.? Never had much luck with CTCSS... maybe DCS

In simpleusb, did you set CTCSSFROM to 'no'? Steve - N8AR

I thought I would try ASL 3 and I like the interface. I was able to program the SHARI, but it will only transmit, it doesn't receive. I looked in simpleUSB and there is nothing there when I transmit,

I'm super curious as to why someone would want their node radio to TX DCS but not RX DCS. So your node is in carrier squelch? Pres W2PW

You can when using CTCSS by setting the frequency to 0 but I see no such option in the SA818 programming instructions for DCS. Steve - N8AR

Is there a way to TX DCS but no RX DCS.??

Thanks for this accessible version. Chris