On Tue, Mar 11, 2025 at 8:32 PM, Udel, Donald B 'Don' - KI5AIU via groups.io

<donudel@...> wrote:

I have 60 ft of Rohn 45G for sale.? Several rotor plates and mast guides included.? Never assembled, stored inside.? I'll make you a good deal.? ?Tower is in Boerne.

73

Don. KI5AIU?

On Tue, Mar 11, 2025, 1:30?PM Gonzalez, Juan - KK6IKW via <juan69ss=[email protected]> wrote:

I'm interested any radio tower for sale

On Tue, Mar 11, 2025 at 10:28 AM, Craft, G.W. 'Bill' - KD2HIQ via

<billc851=[email protected]> wrote:

We went to Terry's house last Sat? and took everything down and hauled it all off. It was a big project. I will be selling it all?? on the? clubs website

George W5GRG

I'm interested any radio tower for sale

On Tue, Mar 11, 2025 at 10:28 AM, Craft, G.W. 'Bill' - KD2HIQ via groups.io

<billc851@...> wrote:

We went to Terry's house last Sat? and took everything down and hauled it all off. It was a big project. I will be selling it all?? on the? clubs website

George W5GRG

On Tue, Mar 11, 2025 at 10:28 AM, Craft, G.W. 'Bill' - KD2HIQ via groups.io

<billc851@...> wrote:

We went to Terry's house last Sat? and took everything down and hauled it all off. It was a big project. I will be selling it all?? on the? clubs website

George W5GRG

On Mar 2, 2025, at 10:53?AM, Beck, Josh D - KJ5KBW via groups.io <joshbeck2006@...> wrote:

?

I have an ft-70d also. (No sdcard in that model, yes.)

?

The Yaesu programming software will work, but RT must be better! The Yaesu software works, but isn't versatile at all.

?

If you use the Yaesu software, you can boot the radio to adms mode with a usb connecting a computer and the radio. (You'll have to youtube that procedure if you want to go that route. Super easy, but requires holding buttons while powering on.)

?

RT has a special cable that, as I understand, acts as a form of copyright protection if you use their software. (I can make the 70 do what I need it to without RT, but I might upgrade there as well )

?

Again, hope that helps. Youtube has a few easy to find tutorials there.

?

?

I'm screwed because i'm not computer sabbay

On Sun, Mar 2, 2025 at 5:02 PM, Thomas, Randall H 'Randy - K7RHT via groups.io

<k7rht@...> wrote:

Or buy the cable and software (I have a cable for every radio I have)? It simplifies the process, you just connect your computer once you build the file and upload to the radio, no SD card needed.

Randy Thomas - K7RHT

All Hazards COML, AUXC, VE

TX ARES, TX RACES, Sky Warn, CERT

WAEOC DEM PACTOR Coordinator

206-255-9510

“Democracy is two wolves and a lamb voting on what to have for lunch.

Liberty is a well-armed lamb contesting the vote!”

― Benjamin Franklin

On Sunday, March 2nd, 2025 at 8:43 AM, Collins, Gregory N 'Greg' - K5KYR <Greg@...> wrote:

I agree with everything Josh has said. I would like to add 2 more benefits that I have used.

The RT Systems software backs up your settings and my case when my radio lost everything from its memory, the software restored all saved data instantly. In addition, Ray System actually has real live support personnel you can actually talk with.?

I now use RT System software for all on my radios.

Greg K5KYR?

On Mar 2, 2025, at 7:44?AM, Beck, Josh D - KJ5KBW via groups.io <joshbeck2006@...> wrote:

?

I bet, given my own limited experience, most would agree with Randy here. $25 for the software package.

?

RT has an import feature where you can tell it to use repeaterbook or a few other sources given a location like Bexar County and then RT can auto-format the file to the FTM 500. You can import the whole shebang it pulls from the internet? or copy/paste and edit the repeaters/frequencies you are interested in. (Options 107-109 in the radio are for working with the sdcard for formatting, import and export.)

?

RT also allows you to manage 'most' of the settings you would find by long pressing the function knob.?

?

I held off on RT for a while, but it really is well thought out software. You'll need a (there are many options) and a

?

Hope that helps too.

Josh

KJ5KBW

?

?

?

I'm screwed because i'm not computer sabbay

On Sun, Mar 2, 2025 at 5:02 PM, Thomas, Randall H 'Randy - K7RHT via groups.io

<k7rht@...> wrote:

Or buy the cable and software (I have a cable for every radio I have) It simplifies the process, you just connect your computer once you build the file and upload to the radio, no SD card needed.

Randy Thomas - K7RHT

All Hazards COML, AUXC, VE

TX ARES, TX RACES, Sky Warn, CERT

WAEOC DEM PACTOR Coordinator

206-255-9510

“Democracy is two wolves and a lamb voting on what to have for lunch.

Liberty is a well-armed lamb contesting the vote!”

― Benjamin Franklin

On Sunday, March 2nd, 2025 at 8:43 AM, Collins, Gregory N 'Greg' - K5KYR <Greg@...> wrote:

I agree with everything Josh has said. I would like to add 2 more benefits that I have used.

The RT Systems software backs up your settings and my case when my radio lost everything from its memory, the software restored all saved data instantly. In addition, Ray System actually has real live support personnel you can actually talk with.

I now use RT System software for all on my radios.

Greg K5KYR

On Mar 2, 2025, at 7:44?AM, Beck, Josh D - KJ5KBW via groups.io <joshbeck2006@...> wrote:

?

I bet, given my own limited experience, most would agree with Randy here. $25 for the software package.

RT has an import feature where you can tell it to use repeaterbook or a few other sources given a location like Bexar County and then RT can auto-format the file to the FTM 500. You can import the whole shebang it pulls from the internet or copy/paste and edit the repeaters/frequencies you are interested in. (Options 107-109 in the radio are for working with the sdcard for formatting, import and export.)

RT also allows you to manage 'most' of the settings you would find by long pressing the function knob.

I held off on RT for a while, but it really is well thought out software. You'll need a (there are many options) and a

Hope that helps too.

Josh

KJ5KBW

Added bonus for buying the RT cable with the software .. the cable also works if you want to run a WiRES-X node.

from Dave’s iPhone

On Sun, Mar 2, 2025 at 8:26?PM Gonzalez, Juan - KK6IKW via <juan69ss= [email protected]> wrote:

I'm screwed because i'm not computer sabbay

On Sun, Mar 2, 2025 at 5:02 PM, Thomas, Randall H 'Randy - K7RHT via

<k7rht= [email protected]> wrote:

Or buy the cable and software (I have a cable for every radio I have)? It simplifies the process, you just connect your computer once you build the file and upload to the radio, no SD card needed.

Randy Thomas - K7RHT

All Hazards COML, AUXC, VE

TX ARES, TX RACES, Sky Warn, CERT

WAEOC DEM PACTOR Coordinator

206-255-9510

“Democracy is two wolves and a lamb voting on what to have for lunch.

Liberty is a well-armed lamb contesting the vote!”

― Benjamin Franklin

On Sunday, March 2nd, 2025 at 8:43 AM, Collins, Gregory N 'Greg' - K5KYR < Greg@...> wrote:

I agree with everything Josh has said. I would like to add 2 more benefits that I have used.

The RT Systems software backs up your settings and my case when my radio lost everything from its memory, the software restored all saved data instantly. In addition, Ray System actually has real live support personnel you can actually talk with.?

I now use RT System software for all on my radios.

Greg K5KYR?

On Mar 2, 2025, at 7:44?AM, Beck, Josh D - KJ5KBW via <joshbeck2006= [email protected]> wrote:

?

I bet, given my own limited experience, most would agree with Randy here. $25 for the software package.

?

RT has an import feature where you can tell it to use repeaterbook or a few other sources given a location like Bexar County and then RT can auto-format the file to the FTM 500. You can import the whole shebang it pulls from the internet? or copy/paste and edit the repeaters/frequencies you are interested in. (Options 107-109 in the radio are for working with the sdcard for formatting, import and export.)

?

RT also allows you to manage 'most' of the settings you would find by long pressing the function knob.?

?

I held off on RT for a while, but it really is well thought out software. You'll need a (there are many options) and a

?

Hope that helps too.

Josh

KJ5KBW

?

?

?

On Feb 27, 2025, at 10:03?AM, Griesbach, George R - W5GRG <w5grg@...> wrote:

?Terry
I can come with A crew and remove everything including the tower bases
We are professional and have done this work before in SA
George W5GRG
USAF MARS
830-357-8142

On 2025-02-25 22:41, Conner, Terry - NN7W via groups.io wrote:
Hey Bill, are the two towers spoken for? Thanks, NN7W

On Feb 16, 2025, at 6:58?PM, Herzog, Keith M - KD5EBJ via
groups.io <Keith.Herzog@...> wrote:
?
I’d be willing to help take down.
Keith Herzog
KD5EBJ
405-568-9304
Thank you,
Keith Herzog
-------------------------
From: [email protected] <[email protected]> on behalf of Stewart, Loyd D
- KJ5AYP via groups.io <loyddale@...>
Sent: Sunday, February 16, 2025 6:17:49 PM
To: [email protected] <[email protected]>
Subject: [EXTERNAL] Re: [SADRC] FREE 40' towers
***CAUTION! EXTERNAL SENDER*** STOP. ASSESS. VERIFY!! If
suspicious, STOP and click the Phish Alert Button
I’d be interested in one of your towers. If I can’t get them
down I will get some help. That’s a generous offer. Thanks,
Loyd
KJ5AYP
[1]
On Friday, February 14, 2025, 12:18 PM, Craft, G.W. 'Bill' - KD2HIQ
via groups.io <billc851@...> wrote:
I have 2 40' Rohn 25G towers at my house. Both have ham rotators.
One has a 2M twist (vertical and horizontal), 5 element 6m yagi and
6M vertical antennas on top. One has the remnants of a 3 element
10/20/40 M yagi (the elements are on the ground and useable and a
440 yagi plus a broken 2M vertical that is trash. Both towers are
mounted to the house and free standing. They are free for taking
them down.
73
Terry K5ADF
7835 Wild Eagle St
San Antonio
TX
k5adf@...
210-487-9974

Links:
------
[1] ;!!KabHiWPSVQ!bDidbLfzjFXIsDpfkrG5uvOhsY4wK_u8DdYjcFEMK6q2pwGMXQBLIuSPKDC8xG03ptISsCuCkGE6p81RvaSe5af-WUecDJdO2A$
[2] /g/SADRC/message/1933
[3] /mt/111187386/385718
[4] /g/SADRC/post
[5] /g/SADRC/editsub/385718
[6] /g/SADRC/leave/12446814/385718/568956719/xyzzy

On Sun, Mar 2, 2025 at 5:02 PM, Thomas, Randall H 'Randy - K7RHT via groups.io

<k7rht@...> wrote:

Or buy the cable and software (I have a cable for every radio I have)? It simplifies the process, you just connect your computer once you build the file and upload to the radio, no SD card needed.

Randy Thomas - K7RHT

All Hazards COML, AUXC, VE

TX ARES, TX RACES, Sky Warn, CERT

WAEOC DEM PACTOR Coordinator

206-255-9510

“Democracy is two wolves and a lamb voting on what to have for lunch.

Liberty is a well-armed lamb contesting the vote!”

― Benjamin Franklin

On Sunday, March 2nd, 2025 at 8:43 AM, Collins, Gregory N 'Greg' - K5KYR <Greg@...> wrote:

I agree with everything Josh has said. I would like to add 2 more benefits that I have used.

The RT Systems software backs up your settings and my case when my radio lost everything from its memory, the software restored all saved data instantly. In addition, Ray System actually has real live support personnel you can actually talk with.?

I now use RT System software for all on my radios.

Greg K5KYR?

On Mar 2, 2025, at 7:44?AM, Beck, Josh D - KJ5KBW via groups.io <joshbeck2006@...> wrote:

?

I bet, given my own limited experience, most would agree with Randy here. $25 for the software package.

?

RT has an import feature where you can tell it to use repeaterbook or a few other sources given a location like Bexar County and then RT can auto-format the file to the FTM 500. You can import the whole shebang it pulls from the internet? or copy/paste and edit the repeaters/frequencies you are interested in. (Options 107-109 in the radio are for working with the sdcard for formatting, import and export.)

?

RT also allows you to manage 'most' of the settings you would find by long pressing the function knob.?

?

I held off on RT for a while, but it really is well thought out software. You'll need a (there are many options) and a

?

Hope that helps too.

Josh

KJ5KBW

?

?

?