I am guessing one would need to re-shim all the tappets.
--
Rich F
'79 JPS #040
'95 S4s ...SHF63000
|
Re: Can smeone identify my Esprit
What is the VIN number?
12/15/2023 10:39 AM CST john.mrozik via groups.io <john.mrozik@...> wrote:
toggle quoted message
Show quoted text
Hi All
I've been a Lotus man since my late teens which was quite some time ago now. In fact I had and still have a Elan +2 and during Covid have bought and restored an Elan S4, Elan Sprint and a TC Europa but as I've always loved and wanted an Esprit I ended up buying one at auction last week.It really is lovely and will only need some,hopefully minor work!
I wonder if someone can can tell me the exact model I've bought? Its a naturally aspirated 2174 cc 1990 Esprit - a couple of photos attached.
Thanks in advance
John
|
Re: Can smeone identify my Esprit
Hi It s a esprit N/A? Whith 2 carb dellortho?
You have 4 wheels in 15 ?
toggle quoted message
Show quoted text
Le 15 d¨¦c. 2023 ¨¤ 17:49, john.mrozik via groups.io <john.mrozik@...> a ¨¦crit?:
?Hi All I've been a Lotus man since my late teens which was quite some time ago now. In fact I had and still have a Elan +2 and during Covid have bought and restored an Elan S4,? Elan Sprint and a TC Europa but as I've always loved and wanted an Esprit I ended up buying one at auction last week.It really is lovely and will only need some,hopefully minor work! I wonder if someone can can tell me the exact model I've bought? Its a naturally aspirated 2174 cc 1990 Esprit - a couple of photos attached. Thanks in advance John
<Esprit 3.jpg> <Eaprit2.jpg> <Esprit 1.jpg>
|
Can smeone identify my Esprit
Hi All
I've been a Lotus man since my late teens which was quite some time ago now. In fact I had and still have a Elan +2 and during Covid have bought and restored an Elan S4,? Elan Sprint and a TC Europa but as I've always loved and wanted an Esprit I ended up buying one at auction last week.It really is lovely and will only need some,hopefully minor work!
I wonder if someone can can tell me the exact model I've bought? Its a naturally aspirated 2174 cc 1990 Esprit - a couple of photos attached.
Thanks in advance
John
|
Hi Rich, Basically yes and it does make for a better oil seal without the wrap around cam cover. I think the 907 carriers may be interchangeable but the 910 carriers are specific for intake or exhaust so watch that you get them right way around when you install them. The difference is just in the angle of the drain drilling but they are marked I and E on the right front corner on top.?
toggle quoted message
Show quoted text
On Dec 10, 2023, at 5:19?PM, Rich Flowers <richnpeg@...> wrote:
?Forum has been quiet for sometime ...
I was curious if the 910 cam carrier would be a drop in replacement for a 907 engine?? Anyone done it or know of someone who has?
I might of asked this along time ago.
--Rich F
'79 JPS #040
'95 S4s ...SHF63000
|
Yes, I have done this on my 1974 Jensen-Healey
I have a 910 cam carrier on the exhaust side of the 2.0L 907 motor in my Healey.
I did it a few years ago and I don't recall any unusual issues.
toggle quoted message
Show quoted text
On Sunday, December 10, 2023 at 06:19:30 PM EST, Rich Flowers <richnpeg@...> wrote:
Forum has been quiet for sometime ...
I was curious if the 910 cam carrier would be a drop in replacement for a 907 engine?? Anyone done it or know of someone who has?
I might of asked this along time ago.
--Rich F
'79 JPS #040
'95 S4s ...SHF63000
|
Forum has been quiet for sometime ...
I was curious if the 910 cam carrier would be a drop in replacement for a 907 engine?? Anyone done it or know of someone who has?
I might of asked this along time ago.
--Rich F
'79 JPS #040
'95 S4s ...SHF63000
|
This is what I used on the S1:?
Direct drop in - looks factory and puts out a great light pattern.
toggle quoted message
Show quoted text
On Aug 28, 2023, at 5:13 PM, ZenHorizon via groups.io <zenhorizon@...> wrote:
Do there exist led headlights for our earlier cars? I can find a set for the 2.2 and turbo series 3 on PNM's website, but cant seem to find anything that may work stateside here in the usa. Has anyone done these on thier car?
|
Do there exist led headlights for our earlier cars? I can find a set for the 2.2 and turbo series 3 on PNM's website, but cant seem to find anything that may work stateside here in the usa. Has anyone done these on thier car?
|
Re: Fuel tank xover plumbiing
Thanks for that, going to be at log 42, so hopefully somebody there with an S2 that I can take a bunch of pictures of because as I go to reassembly I see I¡¯m not quite remembering all I need to, but just bringing +2 this weekend, thanks Gordon
toggle quoted message
Show quoted text
On Aug 23, 2023, at 1:17 PM, dave78esprit via groups.io <armsdc@...> wrote:
?Crossover hose on the S1/S2 is small. I think it¡¯s basically a standard fuel line. The later cars had a much bigger like 1¡± or maybe larger hose. Actually the later cars had 2 custom formed hoses and a crossover pipe. That makes a big difference in crossover flow but changing that would require modifying both tanks because you would need the bigger spigot on both tanks. The Turbo Esprit draws fuel from the left tank, pumps it up to a bypass pressure regulator and the bypass flows back to the right tank. Because of the bypass the fuel pump is constantly pumping gas front he left tank to the right tank so the cross over is normally flowing gas back from right to left even when standing still and idling. The crossover needs to flow better with gravity than the fuel pump can deliver so it needs to be bigger. S1/S2 uses a low pressure pump with no fuel return so theres no need for the extra flow in use. It would certainly be nicer for filling up though if that hose were a bit bigger. The fittings on the later tanks are all BSP thread with a Banjo bolt and I suspect that the S1 S2 is the same but I cant be certain without looking. BSP threads come in both T (Taper) and P (Parallel) versions, the tank threads are parallel meaning they are standard straight cut threads and the seal comes from the gasket washers on the banjo fitting. Taper threads are like Pipe threads that seal on the taper of the threads usually with the addition of teflon tape or pipe sealing compound.
Dave C
On Aug 23, 2023, at 12:07 PM, gsauerphd1 via groups.io <gsauerphd@...> wrote:
?Had a secondary (the one without the sender unit) fuel tank made, but any particulars on how to plumb it for the crossover tubing. Like what is the threading on that bottom pipe piece and did people put a shut off on that before it picks up the crossover tubing? And heard some complaints about how long it takes to equalize fuel, so did people put in bigger crossover hoses?, Thanks, Gordon
|
Re: Fuel tank xover plumbiing
Crossover hose on the S1/S2 is small. I think it¡¯s basically a standard fuel line. The later cars had a much bigger like 1¡± or maybe larger hose. Actually the later cars had 2 custom formed hoses and a crossover pipe. That makes a big difference in crossover flow but changing that would require modifying both tanks because you would need the bigger spigot on both tanks. The Turbo Esprit draws fuel from the left tank, pumps it up to a bypass pressure regulator and the bypass flows back to the right tank. Because of the bypass the fuel pump is constantly pumping gas front he left tank to the right tank so the cross over is normally flowing gas back from right to left even when standing still and idling. The crossover needs to flow better with gravity than the fuel pump can deliver so it needs to be bigger. S1/S2 uses a low pressure pump with no fuel return so theres no need for the extra flow in use. It would certainly be nicer for filling up though if that hose were a bit bigger. The fittings on the later tanks are all BSP thread with a Banjo bolt and I suspect that the S1 S2 is the same but I cant be certain without looking. BSP threads come in both T (Taper) and P (Parallel) versions, the tank threads are parallel meaning they are standard straight cut threads and the seal comes from the gasket washers on the banjo fitting. Taper threads are like Pipe threads that seal on the taper of the threads usually with the addition of teflon tape or pipe sealing compound.
Dave C
toggle quoted message
Show quoted text
On Aug 23, 2023, at 12:07 PM, gsauerphd1 via groups.io <gsauerphd@...> wrote:
?Had a secondary (the one without the sender unit) fuel tank made, but any particulars on how to plumb it for the crossover tubing. Like what is the threading on that bottom pipe piece and did people put a shut off on that before it picks up the crossover tubing? And heard some complaints about how long it takes to equalize fuel, so did people put in bigger crossover hoses?, Thanks, Gordon
|
Fuel tank xover plumbiing
Had a secondary (the one without the sender unit) fuel tank made, but any particulars on how to plumb it for the crossover tubing. Like what is the threading on that bottom pipe piece and did people put a shut off on that before it picks up the crossover tubing? And heard some complaints about how long it takes to equalize fuel, so did people put in bigger crossover hoses?, Thanks, Gordon
|
Hello folks,
Presently in the process of checking my wiring creation up front of my S2 I discovered something odd on one of the headlamp lift motors. The first motor tried has the expected regulator screw/nut setup, whereas #2 motor has a plain capscrew. I must suspect the PO had changed one of the motors at some point but by what means is the 2nd motor regulated?
|
Re: Door mechanism paint/natural?
Natural.
Dave L
toggle quoted message
Show quoted text
On Jul 5, 2023, at 8:03 PM, gsauerphd1 via groups.io <gsauerphd@...> wrote:
?Trying to get it close to Factory, so which one is it? Thanks Gordon.
<image0.jpeg>
<image1.jpeg>
|
Door mechanism paint/natural?
?Trying to get it close to Factory, so which one is it? Thanks Gordon.
|
Re: 78 Esprit s2 Wiper Switch
Rummaging through the chaos I found a switch purchased some time back from Rimmer Bros listed under Triumph Stag parts on the website. It's clearly a recent repro part, detent action has a different feel as compared to OEM and the graphics are inelegantly cartoonish. Wouldn't be my first choice, will refurb the stock item for my S2.
Cheers
|
Re: Oil Switch, Federal Spec
To quote one of many non-PC jokes made by a hockey buddy, A "No" is just a pre-unconcious "Yes".
Yikes.?
|
Re: Oil Switch, Federal Spec
You need to be more receptive. If it identifies as NO, you have to learn to accept that¡.. ? {I¡¯m sorry. I can¡¯t say that with a straight face¡}? ? ? Bill ?
toggle quoted message
Show quoted text
|
Re: Oil Switch, Federal Spec
Turns out the swicth is normally open, won't serve in this case.
|
Re: Oil Switch, Federal Spec
Of course the question is moot if the switch is of the normally open type.
|
John M
ZenHorizon
Bill Galbraith