开云体育

Nope, it should work out of the box. Colby Sent: Saturday, September 15, 2018 23:54 To: [email protected] Subject: [QnetGateway] QnetGateway - Icom Repeater, Linking from the Hotspot to

Hi Colby, Others from the group want to try to link their hotpot to the repeater. I provided the instruction to them to add the repeater call sign and update the DPlus host file , just like what I

You reading the wrong readme. For terminal mode QnetGateway, use ITAP.README.

I'm attempting to use a D-Star radio on Terminal mode with the Raspberry Pi and data cable. I'm down to step 5/6 of the MMDVM.README and when I start MMDVM ./MMDVMHost MMDVM.qn I get this: Cannot open

Hi Colby, Just to inform you that the hot spot link to the repeater is working, editing the DPlus_Hosts.txt file. Thank you.

"make install" will install the programs to run a MMDVMHost-based system, like a ZUMspot or a DVMega. Use "make installicom" to install support for an Icom Stack. "sudo apt install libconfig++-dev"

Hi Colby, Tom, and all, Thought I would give an update regarding what I've done so far on my Raspberry Pi3b+. Installed a bog-standard instance of Rasbian Stretch using the most recent NOOBS

Hi Colby, I posted on the pi-star group but have not received any response. Just wan to share to you what I get when i do the rpi-rw command. Pi-Star's disk is read-only by default, enable read-write

Hi Colby, I try that also. It will not let me get into rpi-rw. I forgot the info display. I do not have the Rpi-3 with me at the manufacturing company I am visiting, it is in the Hotel. The micro sd

Try sudo su - rpi-rw Show me what it says

HI Colby, Yes you are correct, I have not issue the unlink. I just want to make sure it is solid stable link with the reflector.I restarted the Rpi3 several times but no luck.

Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. Pi-Star shouldn’t have any problems going into read-write

HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector

Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link. Colby

Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank

You will also have to restart pistar after making changes to your host files. Colby

It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001 Colby

Hi Will, I can only type 8 characters on my ID-51.

Hello, Try and drop "/" in your UR field when trying to link. ? Try to link to a repeater module like this KM6VLB(B)(L)? "B" is the module 'L' is the link command. Will / W4WWM

Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.