Re: QnetGateway - Icom Repeater, Linking from the Hotspot to the repeater
Nope, it should work out of the box. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Saturday, September 15, 2018 23:54
To: [email protected]
Subject: [QnetGateway] QnetGateway - Icom Repeater, Linking from the Hotspot to the repeater ? Hi Colby,
Others from the group want to try to link their hotpot to the repeater. I provided the instruction to them to add the repeater call sign and update the DPlus host file , just like what I did. Do I need to configure any on the QnetGateway for them to link their hotspot to the repeater? Thanks.
|
QnetGateway - Icom Repeater, Linking from the Hotspot to the repeater
Hi Colby,
Others from the group want to try to link their hotpot to the repeater. I provided the instruction to them to add the repeater call sign and update the DPlus host file , just like what I did. Do I need to configure any on the QnetGateway for them to link their hotspot to the repeater? Thanks.
|
Re: MMDVM not sure what port to use?
You reading the wrong readme. For terminal mode QnetGateway, use ITAP.README.
|
MMDVM not sure what port to use?
I'm attempting to use a D-Star radio on Terminal mode with the Raspberry Pi and data cable. I'm down to step 5/6 of the MMDVM.README and when I start MMDVM ./MMDVMHost MMDVM.qn
I get this: Cannot open device - \\.\COM3
I'm not sure what i need set the port to?
|
Re: Failure on Qngateway Service
Hi Colby,
Just to inform you that the hot spot link to the repeater is
working, editing the DPlus_Hosts.txt file. Thank you.
On 9/12/2018 10:36 PM, Colby Ross W1BSB
wrote:
toggle quoted message
Show quoted text
Yes it most go in dplus. Then restart pistar and
issue KM6VLBBL and it should link.?
Colby?
On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. < nolyn78@...>
wrote:
Hi Colby,
As I recalled, I tried it first on the DPlus_Hosts.txt,
then I did on the DExtra. I will try again tomorrow. it is
getting late , working out of town, returning to San Diego
on Friday. Thank you everyone.
On Wed, Sep 12, 2018 at 10:28 PM Colby Ross
W1BSB < colbypr@...>
wrote:
It should be put into dplus hosts and not
dextra. I'm not sure where you added it but it will only
accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan
Jr. < nolyn78@...>
wrote:
Hi Colby, I have tried that also, but
let me try it again. Yes it will say Linking no
linked.
On Wed, Sep 12, 2018 at 10:03 PM
Colby Ross W1BSB < colbypr@...>
wrote:
Yes, you have to link to
a specific module, in your case which is B,
so the proper link command is KM6VLBBL
?
Colby
?
?
From: [email protected]
<[email protected]>
On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018
01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on
Qngateway Service
?
HI Colby,
I was able to add the
repeater information to the pi-star host
file, but it will say "Linking to KM6VLB
L" not "Linked to KM6VLB L", Am I
missing some on the gateway
configuration?
?
On Tue, Sep 11, 2018
at 8:03 PM Colby Ross W1BSB <colbypr@...>
wrote:
Nomis
?
It has been quite
some time since I used pi-star, I
never used it with D-Star, only for
DMR. I know the repeater can be
added to the host files, but I¡¯m not
quite sure if there is an easy way
to do this. You might want to head
over to their forum and check it
out, they have a pretty good support
team.?
?
I just can¡¯t for
the life of me remember if they
actually had an option that easily
added the repeater in the host files
or not.
?
Colby
?
?
From: [email protected]
<[email protected]>
On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11,
2018 22:33
To: [email protected]
Subject: Re: [QnetGateway]
Failure on Qngateway Service
?
Hi Colby,
I was trying
to connect my Zumspot with RPi 3
to the repeater gateway, since
it can connect 20 dongles and
was not successful. Someone
mentioned that I need to update
my pi-star to add the repeater
information.?
?
On Mon, Sep
10, 2018 at 6:20 PM Colby Ross
W1BSB <colbypr@...>
wrote:
You can
only have one reflector
linked to your repeater at a
time. However, if the XRF
repeater you have linked
cross-links their module
with another, it would
effectively link 2 XRF
reflectors with a common
module.
Colby
?
?
?
Hi Colby,
Sorry, typo error. Two XRF
reflectors. I tried it will
not accept.
?
On
9/10/2018 6:17 PM, Colby
Ross W1BSB wrote:
You can
link your repeater to an
XRF reflector, but you
already know how to do
that. Just issue the
standard link command from
your radio
XRFXXX<Module>L
?
Colby
?
?
?
Hi Colby,
Can I link to XRF
reflector to the repeater?
?
On
9/9/2018 7:26 PM, Nomis
Bayan Jr. wrote:
Hi Colby,
Stepped out and did
some yard work. Once
again, appreciated all
the help. Have a great
day.
?
On
09/09/2018 04:40 PM,
Colby Ross W1BSB
wrote:
I
was still logged in
from before and never
logged out, I logged
out but forgot what
the IP address was so
I can¡¯t check it
again. I think you are
good to go if you
removed the port
forward though.
Because the connection
was already
established, your
firewall would
maintain it until it
drops even if the port
is closed. Your code
is up to date with the
fixes now though, so
you should be good to
go.
?
Colby
?
?
?
HI Colby,
I removed the SSh,
when you told me so
and I was not sure if
you were able to get
into my system, but if
you do then please let
me know. I will return
the ssh.
?
On
09/09/2018 04:00 PM,
Colby Ross W1BSB
wrote:
Tom
discovered an issue
with the linking
section of
QnetGateway and
pushed up a fix. I
applied that fix to
your system as I was
still logged in, as
well as ensuring the
max_dongles was set
at 20. I restarted
the qngateway and
qnlink programs for
you so you are on
the most up to date
code with your
desired number of
linked dongles.
?
I
do not believe there
is a timeout option
in the sourcode.
There isn¡¯t any
mention of it in the
configuration, so I
believe it will stay
linked until someone
manually unlinks it.
?
Colby
?
?
?
Hi Colby,
One of guys was
asking me questions;
1. How many hotspot
can connect to the
gateway? My answer
is it is dependend
on the settings, I
think it was set for
5 and I changed it
to 20.
2. If a station use
the repeater to kink
to another reflector
or repeater and
forgot to unlink, is
there a time
duration that the
repeater will auto
unlink. Not sure
what the answer.
?
On
09/09/2018 12:43
PM, Colby Ross
W1BSB wrote:
It
is, the first
system using the
ICOM stack of
QnetGateway. There
are a few others
out there running
it on hotspots and
dongle type
devices.? It was
my pleasure to
help
?
Colby
?
?
?
HI Colby,
It was a pleasure
to obtain
assistance from
you. This group is
the best group I
ever joined. You
went an extra
miles to help.
When I did the XLX
server, i reached
out to different
groups of ham and
to other fellow
ham and never get
a response, but
was able to run
them after 6
months of not
giving up with no
linux experience.
You have
mentioned that My
system was the
first real system
using the
QnetGateway. Thank
you for developing
this software.
?
On
09/09/2018 12:25
PM, Colby Ross
W1BSB wrote:
No
problem. Don¡¯t
forget to remove
the port forward
(10022 to port
22) for SSH,
that should
never be open
unless you
really need it
to be.
?
It
was my pleasure
to help. You are
the first real
system that is
using
QnetGateway
outside of our
test system we
developed it on.
?
Colby
?
?
?
HI Colby,
Somehow I have
to get use to
these commands.
Thank you again
and the time you
have spent to
assist me in
setting up the
gateway and the
Icom repeater.
?
On
09/09/2018
12:13 PM,
Colby Ross
W1BSB wrote:
Well
I saw you were
trying to talk
over the link
command.
?
So
you issue the
XRF072AL
command to
link, and then
switch to Use
Reflector
CQCQCQ to talk
through the
reflector.
?
Colby
?
?
?
HI Colby,
Hi hot spot
stoppped. It
was probably
on his side.
Do you want me
to open the
ssh so you
maybe able to
go back when
you have the
chance, about
the smart
quad?
?
On
09/09/2018
12:07 PM,
Colby Ross
W1BSB wrote:
Were
you both using
the CQCQCQ use
reflector?
That is the
same as for a
repeater if
you were
trying a local
QSO to the
repeater.
?
Colby
?
?
?
Hi Colby,
We were
testing and
having a qso,
but we could
not hear each
other.
?
On
09/09/2018
10:46 AM,
Colby Ross
W1BSB wrote:
Norm
give me a call
at 2073314368
?
Colby
?
?
?
Hi Colby,
Transmitted
more than once
at QW1BSB. Did
you copy the
voice?
?
?
On
09/09/2018
10:37 AM,
Colby Ross
W1BSB wrote:
I
can hear you
keying it up,
try saying
something.
Leave it in
your UR field
at all times
?
Colby
?
?
?
I entered
the "QW1BSB"
on the direct
input(UR) and
ptt twice.
nothing
happens.
?
On
09/09/2018
10:27 AM,
Colby Ross
W1BSB wrote:
Put
QW1BSB in the
UR field of
your radio
you¡¯re using
to communicate
with your ICOM
repeater. You
may have to
key it twice
to get it to
subscribe, it
should come
back with a
confirmation
tone once you
have logged
in.? I want to
make sure the
ircDDB routing
portion is
working as
well, then I
will try a
reflector link
with you to
make sure.
?
Just
put QW1BSB in
your UR field,
key it once,
and then key
it again. You
should
subscribe, and
I¡¯ll try to
get in contact
with you. Just
leave QW1BSB
in your UR
field to talk
on it.
?
Colby
?
?
?
Hi Colby,
I just
connected to
the XRF072A
reflector and
transmit. It
is working,
thank you so
much.Now I
need someone
transmit and
start a qso.
?
?
On
09/09/2018
10:08 AM,
Colby Ross
W1BSB wrote:
Give
me a few
minutes. I'm
not at my
computer. But
yes you can
safely comment
out the IP
addresses in
the config.
The defaults
work out of
the box. Send
me the output
of the route
command too
please.?
?
On
Sun, Sep 9,
2018, 13:02
Nomis Bayan
Jr. <nolyn78@...>
wrote:
Hi Colby,
Run it
again and here
is the result.
It has
stopped. Do
you want me to
return the #
on all the IP
on qn.cfg?
root@nolyn78dell:/home/nolyn1978/QnetGateway#
systemctl
restart
qngateway
qnlink ;
journalctl -u
qngateway -f
-- Logs begin
at Sun
2018-09-09
09:41:14 PDT.
--
Sep 09
09:52:10
nolyn78dell
systemd[1]:
Started
QnetGateway.
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
VERSION
QnetGateway-7.0.1
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
Reading file
/usr/local/etc/qn.cfg
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
ircddb.login =
[KM6VLB]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
OWNER=[KM6VLB]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
ircddb.host =
[]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
ircddb.port =
[9007]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
ircddb.password = [1111111111111]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.type
= [icom]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.ip =
[172.16.0.1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.port
= [20319]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.frequency = [448.26]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.offset = [0]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.range
= [15]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.agl =
[30]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.latitude = [32]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.longitude = [127]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
module.b.url =
[]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.local_irc_ip = [0.0.0.0]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.ip = [0.0.0.0]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.port = [40000]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.ip = [172.16.0.20]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.port = [20000]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.regen_header = [true]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.aprs_send = [true]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
gateway.send_qrgs_maps = [true]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
aprs.host = []
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
aprs.port =
[14580]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
aprs.interval
= [40]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
aprs.filter =
[]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
log.qso =
[false]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
log.irc =
[false]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
log.dtmf =
[false]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
link.outgoing_ip = [127.0.0.1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
file.echotest
= [/tmp]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
file.dtmf =
[/tmp]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
file.status =
[/usr/local/etc/rptr_status]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
link.port =
[18997]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
link.ip =
[127.0.0.1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.play.wait = [1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.play.delay = [19]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.echo = [1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.voicemail = [1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.remote_g2 = [2]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.local_rptr = [1]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
Repeater
callsigns:
[KM6VLB-A]
[KM6VLB-B]
[KM6VLB-C]
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
aprs hash
code=[17083]
for KM6VLB
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
startWaiting
for irc
connection
status of 2
Sep 09
09:52:10
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09
09:52:11
nolyn78dell
qngateway[1524]:
IRCClient::Entry: connected2
Sep 09
09:52:15
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09
09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setBestServer s-grp1s2
Sep 09
09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setCurrentNick km6vlb-1
Sep 09
09:52:20
nolyn78dell
qngateway[1524]:
irc status=1
Sep 09
09:52:21
nolyn78dell
qngateway[1524]:
IRCDDBApp:
state=2 choose
new 's-'-user
Sep 09
09:52:22
nolyn78dell
qngateway[1524]:
IRCDDBApp:
state=3
tableID=1
Sep 09
09:52:24
nolyn78dell
qngateway[1524]:
IRCDDBApp:
state=3
tableID=0
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
QnetGateway...entering processing loop
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB
RPTRQTH:
KM6VLB_B
+32.00000
+127.00000
La_Mesa,_CA_________
____________________
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB
RPTRURL:
KM6VLB_B
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRSW:
KM6VLB_B
QnetGateway-7.0.1
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB
RPTRQRG:
KM6VLB_B
00448.26000
+000.00000
000.01 0030.0
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
g2=4, srv=5,
MAX+1=6
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
APRS beacon
thread started
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
get_irc_data
thread started
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
Waiting for
ICOM
controller...
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
Trying to
connect to
APRS...
Sep 09
09:52:25
nolyn78dell
qngateway[1524]:
Waiting for up
to 15 seconds
for APRS_HOST
Sep 09
09:52:26
nolyn78dell
qngateway[1524]:
Connected to
APRS
Sep 09
09:52:27
nolyn78dell
qngateway[1524]:
IRCDDBApp:
state=6
initialization
completed
Sep 09
09:53:14
nolyn78dell
qngateway[1524]:
irc status=7,
probable
connect...
?
On
09/09/2018
09:49 AM,
Colby Ross
W1BSB wrote:
You
can comment
out the IP
addresses in
qn.cfg, as the
defaults just
plain work.
?
Colby
?
?
?
Hi found
the error I
just change
the IP back to
172.16.0.20, I
made an error
and entered
172.16.0.1.
Let me run
again.
?
On
09/09/2018
09:41 AM,
Colby Ross
W1BSB wrote:
Actually,
I think I know
what might be
wrong. Restart
the server, I
think more
than one
instance of
qngateway is
running
causing a bind
issue.
?
Reboot
the server,
and when it
comes back up,
type
journalctl -u
qngateway -f
and see what
it says.
?
Colby
?
?
?
Show
me ip a and
/etc/network/interfaces
again
?
Colby
?
?
?
Hi Colby,
It is
working.
Except it say
"can't open " and "Failed to bind
172.16.0.20".
I do not know
how to stop
the so I could
copy the rest.
?
On
09/09/2018
09:00 AM,
Colby Ross
W1BSB wrote:
Alternatively
you can put ¡°
before /tmp
and after
qnvoice so it
reads
qnvoicefile =
¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
--
Regards,
Nomis A. Bayan Jr.
|
Re: QnetGateway instaed of G3
"make install" will install the programs to run a MMDVMHost-based system, like a ZUMspot or a DVMega. Use "make installicom" to install support for an Icom Stack.
"sudo apt install libconfig++-dev" is all you need for libconfig.
It seems like a lot of extra work to make a QnetGateway deb that will be obsoleted as soon as I push up a new version.
|
Re: QnetGateway instaed of G3
Hi Colby, Tom, and all,
Thought I would give an update regarding what I've done so far on my Raspberry Pi3b+.
Installed a bog-standard instance of Rasbian Stretch using the most recent NOOBS installer.
Pulled a copy of the source code, installed a couple of DEBs for the Libconfig dependencies.
Installed the Checkinstall DEB.
Built a file for the reflector addresses
Ran make icom (completed without error)
Hacked a config file. As the controller is still sitting in the cardboard box it arrived in I just used dummy data. Not convinced that the file is right or complete.
Ran "checkinstall" with the flag to build the DEB but NOT install it. This step is done instead of running "make install".
The result was a DEB file that I was then able to successfully install using DPKG. SO EASY to build the DEB installer.
The binary didn't execute due to an issue with the config file which I have not yet put time into resolving. To do that I probably should get the controller out of the box and set it up on the LAN.
Cheers
David Murray
|
Re: Failure on Qngateway Service
Hi Colby, I posted on the pi-star group but have not received any response. Just wan to share to you what I get when i do the rpi-rw command. Pi-Star's disk is read-only by default, enable read-write with "rpi-rw". Pi-Star built by Andy Taylor (MW0MWZ), pi-star tools all start "pistar-". -bash: /usr/share/bash-completion/bash_completion: Structure needs cleaning -bash: /usr/share/bash-completion/bash_completion: Structure needs cleaning pi-star@pi-star(ro):~$ rpi-rw mount: / not mounted or bad option In some cases useful info is found in syslog - try dmesg | tail or so. pi-star@pi-star(ro):~$
On Thu, Sep 13, 2018 at 11:29 AM Colby Ross W1BSB < colbypr@...> wrote: Try sudo su - rpi-rw
Show me what it says?
On Thu, Sep 13, 2018, 14:21 Nomis Bayan Jr. < nolyn78@...> wrote: HI Colby, Yes you are correct, I have not issue the unlink. I just want to make sure it is solid stable link with the reflector.I restarted the Rpi3 several times but no luck.
On Thu, Sep 13, 2018 at 11:11 AM Colby Ross W1BSB < colbypr@...> wrote: Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. ? Pi-Star shouldn¡¯t have any problems going into read-write mode. Just restart it. Additionally, you should restart it after you add your repeater to the DPlus_Hosts.txt file as well. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 14:09
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard. ? On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB <colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.? ? On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone. ? On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB <colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001? ? On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked. ? On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB <colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
--
--
--
Regards,
Nomis A. Bayan Jr.
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Hi Colby, I try that also. It will not let me get into rpi-rw. I forgot the info display. I do not have the Rpi-3 with me at the manufacturing company I am visiting, it is in the Hotel. The micro sd was probably corrupted.
On Thu, Sep 13, 2018 at 11:29 AM Colby Ross W1BSB < colbypr@...> wrote: Try sudo su - rpi-rw
Show me what it says?
On Thu, Sep 13, 2018, 14:21 Nomis Bayan Jr. < nolyn78@...> wrote: HI Colby, Yes you are correct, I have not issue the unlink. I just want to make sure it is solid stable link with the reflector.I restarted the Rpi3 several times but no luck.
On Thu, Sep 13, 2018 at 11:11 AM Colby Ross W1BSB < colbypr@...> wrote: Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. ? Pi-Star shouldn¡¯t have any problems going into read-write mode. Just restart it. Additionally, you should restart it after you add your repeater to the DPlus_Hosts.txt file as well. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 14:09
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard. ? On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB <colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.? ? On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone. ? On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB <colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001? ? On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked. ? On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB <colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
--
--
--
Regards,
Nomis A. Bayan Jr.
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Try sudo su - rpi-rw
Show me what it says?
On Thu, Sep 13, 2018, 14:21 Nomis Bayan Jr. < nolyn78@...> wrote: HI Colby, Yes you are correct, I have not issue the unlink. I just want to make sure it is solid stable link with the reflector.I restarted the Rpi3 several times but no luck.
On Thu, Sep 13, 2018 at 11:11 AM Colby Ross W1BSB < colbypr@...> wrote: Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. ? Pi-Star shouldn¡¯t have any problems going into read-write mode. Just restart it. Additionally, you should restart it after you add your repeater to the DPlus_Hosts.txt file as well. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 14:09
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard. ? On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB <colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.? ? On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone. ? On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB <colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001? ? On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked. ? On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB <colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
--
--
--
Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
HI Colby, Yes you are correct, I have not issue the unlink. I just want to make sure it is solid stable link with the reflector.I restarted the Rpi3 several times but no luck.
On Thu, Sep 13, 2018 at 11:11 AM Colby Ross W1BSB < colbypr@...> wrote: Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. ? Pi-Star shouldn¡¯t have any problems going into read-write mode. Just restart it. Additionally, you should restart it after you add your repeater to the DPlus_Hosts.txt file as well. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 14:09
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard. ? On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB <colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.? ? On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone. ? On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB <colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001? ? On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked. ? On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB <colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
--
--
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Ok. If you did not issue _______U after you finished using the repeater, it will stay linked to whatever repeater you linked it to. ? Pi-Star shouldn¡¯t have any problems going into read-write mode. Just restart it. Additionally, you should restart it after you add your repeater to the DPlus_Hosts.txt file as well. ? Colby ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 14:09
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard. ? On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB <colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.? ? On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone. ? On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB <colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001? ? On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked. ? On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB <colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
--
--
|
Re: Failure on Qngateway Service
HI Colby, My RPI 3 somehow went bad, I could not get into rpi-rw. I may have to update them when I get home tomorrow. Just to update you on the link, the gateway is till linted to the XRF reflector via dashboard.
On Wed, Sep 12, 2018 at 10:36 PM Colby Ross W1BSB < colbypr@...> wrote: Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.?
Colby?
On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone.
On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB < colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
--
Regards,
Nomis A. Bayan Jr.
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Yes it most go in dplus. Then restart pistar and issue KM6VLBBL and it should link.?
Colby?
On Thu, Sep 13, 2018, 01:32 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone.
On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB < colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
--
Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Hi Colby, As I recalled, I tried it first on the DPlus_Hosts.txt, then I did on the DExtra. I will try again tomorrow. it is getting late , working out of town, returning to San Diego on Friday. Thank you everyone.
On Wed, Sep 12, 2018 at 10:28 PM Colby Ross W1BSB < colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
You will also have to restart pistar after making changes to your host files.?
Colby?
On Thu, Sep 13, 2018, 01:28 Colby Ross W1BSB < colbypr@...> wrote: It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
It should be put into dplus hosts and not dextra. I'm not sure where you added it but it will only accept dplus connections. These occur on port 20001?
Colby?
On Thu, Sep 13, 2018, 01:23 Nomis Bayan Jr. < nolyn78@...> wrote: Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
--
Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Hi Will, I can only type 8 characters on my ID-51.
On Wed, Sep 12, 2018 at 10:23 PM Will < w4wwm@...> wrote:
Hello,
Try and drop "/" in your UR field when trying to link. ? Try to
link to a repeater module like this KM6VLB(B)(L)? "B" is the
module 'L' is the link command.
Will / W4WWM ?????
On 9/13/2018 12:01 AM, Nomis Bayan Jr.
wrote:
HI Colby,
I was able to add the repeater information to the pi-star
host file, but it will say "Linking to KM6VLB L" not "Linked
to KM6VLB L", Am I missing some on the gateway configuration?
On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB
< colbypr@...> wrote:
Nomis
?
It has been quite some time since I
used pi-star, I never used it with D-Star, only for DMR.
I know the repeater can be added to the host files, but
I¡¯m not quite sure if there is an easy way to do this.
You might want to head over to their forum and check it
out, they have a pretty good support team.?
?
I just can¡¯t for the life of me
remember if they actually had an option that easily
added the repeater in the host files or not.
?
Colby
?
?
From: [email protected] <[email protected]> On
Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway
Service
?
Hi Colby,
I was trying to connect my
Zumspot with RPi 3 to the repeater gateway, since it
can connect 20 dongles and was not successful.
Someone mentioned that I need to update my pi-star
to add the repeater information.?
?
On Mon, Sep 10, 2018 at 6:20 PM
Colby Ross W1BSB <colbypr@...>
wrote:
You can only have one
reflector linked to your repeater at a time.
However, if the XRF repeater you have linked
cross-links their module with another, it would
effectively link 2 XRF reflectors with a common
module.
Colby
?
?
?
Hi Colby,
Sorry, typo error. Two XRF reflectors. I tried
it will not accept.
?
On 9/10/2018 6:17 PM, Colby
Ross W1BSB wrote:
You can link your repeater
to an XRF reflector, but you already know how
to do that. Just issue the standard link
command from your radio XRFXXX<Module>L
?
Colby
?
?
?
Hi Colby,
Can I link to XRF reflector to the repeater?
?
On 9/9/2018 7:26 PM,
Nomis Bayan Jr. wrote:
Hi Colby,
Stepped out and did some yard work. Once
again, appreciated all the help. Have a
great day.
?
On 09/09/2018 04:40 PM,
Colby Ross W1BSB wrote:
I was still logged in
from before and never logged out, I logged
out but forgot what the IP address was so
I can¡¯t check it again. I think you are
good to go if you removed the port forward
though. Because the connection was already
established, your firewall would maintain
it until it drops even if the port is
closed. Your code is up to date with the
fixes now though, so you should be good to
go.
?
Colby
?
?
?
HI Colby,
I removed the SSh, when you told me so
and I was not sure if you were able to get
into my system, but if you do then please
let me know. I will return the ssh.
?
On 09/09/2018 04:00
PM, Colby Ross W1BSB wrote:
Tom discovered an
issue with the linking section of
QnetGateway and pushed up a fix. I
applied that fix to your system as I was
still logged in, as well as ensuring the
max_dongles was set at 20. I restarted
the qngateway and qnlink programs for
you so you are on the most up to date
code with your desired number of linked
dongles.
?
I do not believe
there is a timeout option in the
sourcode. There isn¡¯t any mention of it
in the configuration, so I believe it
will stay linked until someone manually
unlinks it.
?
Colby
?
?
?
Hi Colby,
One of guys was asking me questions;
1. How many hotspot can connect to the
gateway? My answer is it is dependend on
the settings, I think it was set for 5
and I changed it to 20.
2. If a station use the repeater to
kink to another reflector or repeater
and forgot to unlink, is there a time
duration that the repeater will auto
unlink. Not sure what the answer.
?
On 09/09/2018 12:43
PM, Colby Ross W1BSB wrote:
It is, the first
system using the ICOM stack of
QnetGateway. There are a few others
out there running it on hotspots and
dongle type devices.? It was my
pleasure to help
?
Colby
?
?
?
HI Colby,
It was a pleasure to obtain
assistance from you. This group is the
best group I ever joined. You went an
extra miles to help. When I did the
XLX server, i reached out to different
groups of ham and to other fellow ham
and never get a response, but was able
to run them after 6 months of not
giving up with no linux experience.
You have mentioned that My system was
the first real system using the
QnetGateway. Thank you for developing
this software.
?
On 09/09/2018
12:25 PM, Colby Ross W1BSB wrote:
No problem. Don¡¯t
forget to remove the port forward
(10022 to port 22) for SSH, that
should never be open unless you
really need it to be.
?
It was my
pleasure to help. You are the first
real system that is using
QnetGateway outside of our test
system we developed it on.
?
Colby
?
?
?
HI Colby,
Somehow I have to get use to these
commands. Thank you again and the
time you have spent to assist me in
setting up the gateway and the Icom
repeater.
?
On 09/09/2018
12:13 PM, Colby Ross W1BSB wrote:
Well I saw you
were trying to talk over the link
command.
?
So you issue
the XRF072AL command to link, and
then switch to Use Reflector
CQCQCQ to talk through the
reflector.
?
Colby
?
?
?
HI Colby,
Hi hot spot stoppped. It was
probably on his side. Do you want
me to open the ssh so you maybe
able to go back when you have the
chance, about the smart quad?
?
On 09/09/2018
12:07 PM, Colby Ross W1BSB
wrote:
Were you both
using the CQCQCQ use reflector?
That is the same as for a
repeater if you were trying a
local QSO to the repeater.
?
Colby
?
?
?
Hi Colby,
We were testing and having a
qso, but we could not hear each
other.
?
On
09/09/2018 10:46 AM, Colby
Ross W1BSB wrote:
Norm give
me a call at 2073314368
?
Colby
?
?
?
Hi Colby, Transmitted more
than once at QW1BSB. Did you
copy the voice?
?
?
On
09/09/2018 10:37 AM, Colby
Ross W1BSB wrote:
I can
hear you keying it up, try
saying something. Leave it
in your UR field at all
times
?
Colby
?
?
?
I entered the "QW1BSB" on
the direct input(UR) and ptt
twice. nothing happens.
?
On
09/09/2018 10:27 AM, Colby
Ross W1BSB wrote:
Put
QW1BSB in the UR field of
your radio you¡¯re using to
communicate with your ICOM
repeater. You may have to
key it twice to get it to
subscribe, it should come
back with a confirmation
tone once you have logged
in.? I want to make sure
the ircDDB routing portion
is working as well, then I
will try a reflector link
with you to make sure.
?
Just
put QW1BSB in your UR
field, key it once, and
then key it again. You
should subscribe, and I¡¯ll
try to get in contact with
you. Just leave QW1BSB in
your UR field to talk on
it.
?
Colby
?
?
?
Hi Colby,
I just connected to the
XRF072A reflector and
transmit. It is working,
thank you so much.Now I
need someone transmit and
start a qso.
?
?
On
09/09/2018 10:08 AM,
Colby Ross W1BSB wrote:
Give
me a few minutes. I'm
not at my computer.
But yes you can safely
comment out the IP
addresses in the
config. The defaults
work out of the box.
Send me the output of
the route command too
please.?
?
On
Sun, Sep 9, 2018,
13:02 Nomis Bayan
Jr. <nolyn78@...>
wrote:
Hi Colby,
Run it again and
here is the
result. It has
stopped. Do you
want me to return
the # on all the
IP on qn.cfg?
root@nolyn78dell:/home/nolyn1978/QnetGateway#
systemctl restart
qngateway qnlink ;
journalctl -u
qngateway -f
-- Logs begin at
Sun 2018-09-09
09:41:14 PDT. --
Sep 09 09:52:10
nolyn78dell
systemd[1]:
Started
QnetGateway.
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
VERSION
QnetGateway-7.0.1
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
Reading file
/usr/local/etc/qn.cfg
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.login =
[KM6VLB]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
OWNER=[KM6VLB]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.host = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.port =
[9007]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.password =
[1111111111111]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.type =
[icom]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.ip =
[172.16.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.port =
[20319]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.frequency
= [448.26]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.offset =
[0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.range =
[15]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.agl =
[30]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.latitude
= [32]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.longitude
= [127]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.url = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.local_irc_ip
= [0.0.0.0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.ip
= [0.0.0.0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.port
= [40000]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.ip
= [172.16.0.20]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.port
= [20000]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.regen_header
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.aprs_send
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.send_qrgs_maps
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.host = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.port =
[14580]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.interval =
[40]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.filter = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.qso = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.irc = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.dtmf = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.outgoing_ip =
[127.0.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.echotest =
[/tmp]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.dtmf = [/tmp]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.status =
[/usr/local/etc/rptr_status]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.port =
[18997]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.ip =
[127.0.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.play.wait =
[1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.play.delay
= [19]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.echo
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.voicemail
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.remote_g2
= [2]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.local_rptr
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
Repeater
callsigns:
[KM6VLB-A]
[KM6VLB-B]
[KM6VLB-C]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs hash
code=[17083] for
KM6VLB
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
startWaiting for
irc connection
status of 2
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09 09:52:11
nolyn78dell
qngateway[1524]:
IRCClient::Entry:
connected2
Sep 09 09:52:15
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09 09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setBestServer
s-grp1s2
Sep 09 09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setCurrentNick
km6vlb-1
Sep 09 09:52:20
nolyn78dell
qngateway[1524]:
irc status=1
Sep 09 09:52:21
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=2
choose new
's-'-user
Sep 09 09:52:22
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=3
tableID=1
Sep 09 09:52:24
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=3
tableID=0
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
QnetGateway...entering
processing loop
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRQTH:
KM6VLB_B +32.00000
+127.00000
La_Mesa,_CA_________
____________________
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRURL:
KM6VLB_B
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRSW:
KM6VLB_B
QnetGateway-7.0.1
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRQRG:
KM6VLB_B
00448.26000
+000.00000 000.01
0030.0
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
g2=4, srv=5,
MAX+1=6
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
APRS beacon thread
started
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
get_irc_data
thread started
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Waiting for ICOM
controller...
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Trying to connect
to APRS...
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Waiting for up to
15 seconds for
APRS_HOST
Sep 09 09:52:26
nolyn78dell
qngateway[1524]:
Connected to APRS
Sep 09 09:52:27
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=6
initialization
completed
Sep 09 09:53:14
nolyn78dell
qngateway[1524]:
irc status=7,
probable
connect...
?
On
09/09/2018 09:49
AM, Colby Ross
W1BSB wrote:
You
can comment
out the IP
addresses in
qn.cfg, as the
defaults just
plain work.
?
Colby
?
?
?
Hi found the
error I just
change the IP
back to
172.16.0.20, I
made an error
and entered
172.16.0.1.
Let me run
again.
?
On
09/09/2018
09:41 AM,
Colby Ross
W1BSB wrote:
Actually,
I think I know
what might be
wrong. Restart
the server, I
think more
than one
instance of
qngateway is
running
causing a bind
issue.
?
Reboot
the server,
and when it
comes back up,
type
journalctl -u
qngateway -f
and see what
it says.
?
Colby
?
?
?
Show
me ip a and
/etc/network/interfaces
again
?
Colby
?
?
?
Hi Colby,
It is
working.
Except it say
"can't open "
and "Failed to
bind
172.16.0.20".
I do not know
how to stop
the so I could
copy the rest.
?
On
09/09/2018
09:00 AM,
Colby Ross
W1BSB wrote:
Alternatively
you can put ¡°
before /tmp
and after
qnvoice so it
reads
qnvoicefile =
¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
Regards,
Nomis A. Bayan Jr.
-- Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Hello,
Try and drop "/" in your UR field when trying to link. ? Try to
link to a repeater module like this KM6VLB(B)(L)? "B" is the
module 'L' is the link command.
Will / W4WWM ?????
On 9/13/2018 12:01 AM, Nomis Bayan Jr.
wrote:
toggle quoted message
Show quoted text
HI Colby,
I was able to add the repeater information to the pi-star
host file, but it will say "Linking to KM6VLB L" not "Linked
to KM6VLB L", Am I missing some on the gateway configuration?
On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB
< colbypr@...> wrote:
Nomis
?
It has been quite some time since I
used pi-star, I never used it with D-Star, only for DMR.
I know the repeater can be added to the host files, but
I¡¯m not quite sure if there is an easy way to do this.
You might want to head over to their forum and check it
out, they have a pretty good support team.?
?
I just can¡¯t for the life of me
remember if they actually had an option that easily
added the repeater in the host files or not.
?
Colby
?
?
From: [email protected] <[email protected]> On
Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway
Service
?
Hi Colby,
I was trying to connect my
Zumspot with RPi 3 to the repeater gateway, since it
can connect 20 dongles and was not successful.
Someone mentioned that I need to update my pi-star
to add the repeater information.?
?
On Mon, Sep 10, 2018 at 6:20 PM
Colby Ross W1BSB <colbypr@...>
wrote:
You can only have one
reflector linked to your repeater at a time.
However, if the XRF repeater you have linked
cross-links their module with another, it would
effectively link 2 XRF reflectors with a common
module.
Colby
?
?
?
Hi Colby,
Sorry, typo error. Two XRF reflectors. I tried
it will not accept.
?
On 9/10/2018 6:17 PM, Colby
Ross W1BSB wrote:
You can link your repeater
to an XRF reflector, but you already know how
to do that. Just issue the standard link
command from your radio XRFXXX<Module>L
?
Colby
?
?
?
Hi Colby,
Can I link to XRF reflector to the repeater?
?
On 9/9/2018 7:26 PM,
Nomis Bayan Jr. wrote:
Hi Colby,
Stepped out and did some yard work. Once
again, appreciated all the help. Have a
great day.
?
On 09/09/2018 04:40 PM,
Colby Ross W1BSB wrote:
I was still logged in
from before and never logged out, I logged
out but forgot what the IP address was so
I can¡¯t check it again. I think you are
good to go if you removed the port forward
though. Because the connection was already
established, your firewall would maintain
it until it drops even if the port is
closed. Your code is up to date with the
fixes now though, so you should be good to
go.
?
Colby
?
?
?
HI Colby,
I removed the SSh, when you told me so
and I was not sure if you were able to get
into my system, but if you do then please
let me know. I will return the ssh.
?
On 09/09/2018 04:00
PM, Colby Ross W1BSB wrote:
Tom discovered an
issue with the linking section of
QnetGateway and pushed up a fix. I
applied that fix to your system as I was
still logged in, as well as ensuring the
max_dongles was set at 20. I restarted
the qngateway and qnlink programs for
you so you are on the most up to date
code with your desired number of linked
dongles.
?
I do not believe
there is a timeout option in the
sourcode. There isn¡¯t any mention of it
in the configuration, so I believe it
will stay linked until someone manually
unlinks it.
?
Colby
?
?
?
Hi Colby,
One of guys was asking me questions;
1. How many hotspot can connect to the
gateway? My answer is it is dependend on
the settings, I think it was set for 5
and I changed it to 20.
2. If a station use the repeater to
kink to another reflector or repeater
and forgot to unlink, is there a time
duration that the repeater will auto
unlink. Not sure what the answer.
?
On 09/09/2018 12:43
PM, Colby Ross W1BSB wrote:
It is, the first
system using the ICOM stack of
QnetGateway. There are a few others
out there running it on hotspots and
dongle type devices.? It was my
pleasure to help
?
Colby
?
?
?
HI Colby,
It was a pleasure to obtain
assistance from you. This group is the
best group I ever joined. You went an
extra miles to help. When I did the
XLX server, i reached out to different
groups of ham and to other fellow ham
and never get a response, but was able
to run them after 6 months of not
giving up with no linux experience.
You have mentioned that My system was
the first real system using the
QnetGateway. Thank you for developing
this software.
?
On 09/09/2018
12:25 PM, Colby Ross W1BSB wrote:
No problem. Don¡¯t
forget to remove the port forward
(10022 to port 22) for SSH, that
should never be open unless you
really need it to be.
?
It was my
pleasure to help. You are the first
real system that is using
QnetGateway outside of our test
system we developed it on.
?
Colby
?
?
?
HI Colby,
Somehow I have to get use to these
commands. Thank you again and the
time you have spent to assist me in
setting up the gateway and the Icom
repeater.
?
On 09/09/2018
12:13 PM, Colby Ross W1BSB wrote:
Well I saw you
were trying to talk over the link
command.
?
So you issue
the XRF072AL command to link, and
then switch to Use Reflector
CQCQCQ to talk through the
reflector.
?
Colby
?
?
?
HI Colby,
Hi hot spot stoppped. It was
probably on his side. Do you want
me to open the ssh so you maybe
able to go back when you have the
chance, about the smart quad?
?
On 09/09/2018
12:07 PM, Colby Ross W1BSB
wrote:
Were you both
using the CQCQCQ use reflector?
That is the same as for a
repeater if you were trying a
local QSO to the repeater.
?
Colby
?
?
?
Hi Colby,
We were testing and having a
qso, but we could not hear each
other.
?
On
09/09/2018 10:46 AM, Colby
Ross W1BSB wrote:
Norm give
me a call at 2073314368
?
Colby
?
?
?
Hi Colby, Transmitted more
than once at QW1BSB. Did you
copy the voice?
?
?
On
09/09/2018 10:37 AM, Colby
Ross W1BSB wrote:
I can
hear you keying it up, try
saying something. Leave it
in your UR field at all
times
?
Colby
?
?
?
I entered the "QW1BSB" on
the direct input(UR) and ptt
twice. nothing happens.
?
On
09/09/2018 10:27 AM, Colby
Ross W1BSB wrote:
Put
QW1BSB in the UR field of
your radio you¡¯re using to
communicate with your ICOM
repeater. You may have to
key it twice to get it to
subscribe, it should come
back with a confirmation
tone once you have logged
in.? I want to make sure
the ircDDB routing portion
is working as well, then I
will try a reflector link
with you to make sure.
?
Just
put QW1BSB in your UR
field, key it once, and
then key it again. You
should subscribe, and I¡¯ll
try to get in contact with
you. Just leave QW1BSB in
your UR field to talk on
it.
?
Colby
?
?
?
Hi Colby,
I just connected to the
XRF072A reflector and
transmit. It is working,
thank you so much.Now I
need someone transmit and
start a qso.
?
?
On
09/09/2018 10:08 AM,
Colby Ross W1BSB wrote:
Give
me a few minutes. I'm
not at my computer.
But yes you can safely
comment out the IP
addresses in the
config. The defaults
work out of the box.
Send me the output of
the route command too
please.?
?
On
Sun, Sep 9, 2018,
13:02 Nomis Bayan
Jr. <nolyn78@...>
wrote:
Hi Colby,
Run it again and
here is the
result. It has
stopped. Do you
want me to return
the # on all the
IP on qn.cfg?
root@nolyn78dell:/home/nolyn1978/QnetGateway#
systemctl restart
qngateway qnlink ;
journalctl -u
qngateway -f
-- Logs begin at
Sun 2018-09-09
09:41:14 PDT. --
Sep 09 09:52:10
nolyn78dell
systemd[1]:
Started
QnetGateway.
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
VERSION
QnetGateway-7.0.1
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
Reading file
/usr/local/etc/qn.cfg
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.login =
[KM6VLB]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
OWNER=[KM6VLB]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.host = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.port =
[9007]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
ircddb.password =
[1111111111111]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.type =
[icom]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.ip =
[172.16.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.port =
[20319]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.frequency
= [448.26]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.offset =
[0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.range =
[15]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.agl =
[30]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.latitude
= [32]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.longitude
= [127]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
module.b.url = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.local_irc_ip
= [0.0.0.0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.ip
= [0.0.0.0]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.external.port
= [40000]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.ip
= [172.16.0.20]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.internal.port
= [20000]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.regen_header
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.aprs_send
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
gateway.send_qrgs_maps
= [true]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.host = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.port =
[14580]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.interval =
[40]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs.filter = []
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.qso = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.irc = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
log.dtmf = [false]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.outgoing_ip =
[127.0.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.echotest =
[/tmp]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.dtmf = [/tmp]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
file.status =
[/usr/local/etc/rptr_status]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.port =
[18997]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
link.ip =
[127.0.0.1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.play.wait =
[1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.play.delay
= [19]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.echo
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.voicemail
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.remote_g2
= [2]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
timing.timeout.local_rptr
= [1]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
Repeater
callsigns:
[KM6VLB-A]
[KM6VLB-B]
[KM6VLB-C]
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
aprs hash
code=[17083] for
KM6VLB
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
startWaiting for
irc connection
status of 2
Sep 09 09:52:10
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09 09:52:11
nolyn78dell
qngateway[1524]:
IRCClient::Entry:
connected2
Sep 09 09:52:15
nolyn78dell
qngateway[1524]:
irc status=0
Sep 09 09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setBestServer
s-grp1s2
Sep 09 09:52:17
nolyn78dell
qngateway[1524]:
IRCDDBApp::setCurrentNick
km6vlb-1
Sep 09 09:52:20
nolyn78dell
qngateway[1524]:
irc status=1
Sep 09 09:52:21
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=2
choose new
's-'-user
Sep 09 09:52:22
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=3
tableID=1
Sep 09 09:52:24
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=3
tableID=0
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
QnetGateway...entering
processing loop
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRQTH:
KM6VLB_B +32.00000
+127.00000
La_Mesa,_CA_________
____________________
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRURL:
KM6VLB_B
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRSW:
KM6VLB_B
QnetGateway-7.0.1
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
IRCDDB RPTRQRG:
KM6VLB_B
00448.26000
+000.00000 000.01
0030.0
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
g2=4, srv=5,
MAX+1=6
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
APRS beacon thread
started
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
get_irc_data
thread started
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Waiting for ICOM
controller...
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Trying to connect
to APRS...
Sep 09 09:52:25
nolyn78dell
qngateway[1524]:
Waiting for up to
15 seconds for
APRS_HOST
Sep 09 09:52:26
nolyn78dell
qngateway[1524]:
Connected to APRS
Sep 09 09:52:27
nolyn78dell
qngateway[1524]:
IRCDDBApp: state=6
initialization
completed
Sep 09 09:53:14
nolyn78dell
qngateway[1524]:
irc status=7,
probable
connect...
?
On
09/09/2018 09:49
AM, Colby Ross
W1BSB wrote:
You
can comment
out the IP
addresses in
qn.cfg, as the
defaults just
plain work.
?
Colby
?
?
?
Hi found the
error I just
change the IP
back to
172.16.0.20, I
made an error
and entered
172.16.0.1.
Let me run
again.
?
On
09/09/2018
09:41 AM,
Colby Ross
W1BSB wrote:
Actually,
I think I know
what might be
wrong. Restart
the server, I
think more
than one
instance of
qngateway is
running
causing a bind
issue.
?
Reboot
the server,
and when it
comes back up,
type
journalctl -u
qngateway -f
and see what
it says.
?
Colby
?
?
?
Show
me ip a and
/etc/network/interfaces
again
?
Colby
?
?
?
Hi Colby,
It is
working.
Except it say
"can't open "
and "Failed to
bind
172.16.0.20".
I do not know
how to stop
the so I could
copy the rest.
?
On
09/09/2018
09:00 AM,
Colby Ross
W1BSB wrote:
Alternatively
you can put ¡°
before /tmp
and after
qnvoice so it
reads
qnvoicefile =
¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
Regards,
Nomis A. Bayan Jr.
|
Re: Failure on Qngateway Service
Hi Colby, I have tried that also, but let me try it again. Yes it will say Linking no linked.
On Wed, Sep 12, 2018 at 10:03 PM Colby Ross W1BSB < colbypr@...> wrote: Yes, you have to link to a specific module, in your case which is B, so the proper link command is KM6VLBBL ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Thursday, September 13, 2018 01:02
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? HI Colby, I was able to add the repeater information to the pi-star host file, but it will say "Linking to KM6VLB L" not "Linked to KM6VLB L", Am I missing some on the gateway configuration? ? On Tue, Sep 11, 2018 at 8:03 PM Colby Ross W1BSB <colbypr@...> wrote: Nomis ? It has been quite some time since I used pi-star, I never used it with D-Star, only for DMR. I know the repeater can be added to the host files, but I¡¯m not quite sure if there is an easy way to do this. You might want to head over to their forum and check it out, they have a pretty good support team.? ? I just can¡¯t for the life of me remember if they actually had an option that easily added the repeater in the host files or not. ? Colby ? ? From: [email protected] <[email protected]> On Behalf Of Nomis Bayan Jr.
Sent: Tuesday, September 11, 2018 22:33
To: [email protected]
Subject: Re: [QnetGateway] Failure on Qngateway Service ? Hi Colby, I was trying to connect my Zumspot with RPi 3 to the repeater gateway, since it can connect 20 dongles and was not successful. Someone mentioned that I need to update my pi-star to add the repeater information.? ? On Mon, Sep 10, 2018 at 6:20 PM Colby Ross W1BSB <colbypr@...> wrote: You can only have one reflector linked to your repeater at a time. However, if the XRF repeater you have linked cross-links their module with another, it would effectively link 2 XRF reflectors with a common module.
Colby
? ? ? Hi Colby, Sorry, typo error. Two XRF reflectors. I tried it will not accept. ? On 9/10/2018 6:17 PM, Colby Ross W1BSB wrote: You can link your repeater to an XRF reflector, but you already know how to do that. Just issue the standard link command from your radio XRFXXX<Module>L ? Colby ? ? ? Hi Colby, Can I link to XRF reflector to the repeater? ? On 9/9/2018 7:26 PM, Nomis Bayan Jr. wrote: Hi Colby, Stepped out and did some yard work. Once again, appreciated all the help. Have a great day. ? On 09/09/2018 04:40 PM, Colby Ross W1BSB wrote: I was still logged in from before and never logged out, I logged out but forgot what the IP address was so I can¡¯t check it again. I think you are good to go if you removed the port forward though. Because the connection was already established, your firewall would maintain it until it drops even if the port is closed. Your code is up to date with the fixes now though, so you should be good to go. ? Colby ? ? ? HI Colby, I removed the SSh, when you told me so and I was not sure if you were able to get into my system, but if you do then please let me know. I will return the ssh. ? On 09/09/2018 04:00 PM, Colby Ross W1BSB wrote: Tom discovered an issue with the linking section of QnetGateway and pushed up a fix. I applied that fix to your system as I was still logged in, as well as ensuring the max_dongles was set at 20. I restarted the qngateway and qnlink programs for you so you are on the most up to date code with your desired number of linked dongles. ? I do not believe there is a timeout option in the sourcode. There isn¡¯t any mention of it in the configuration, so I believe it will stay linked until someone manually unlinks it. ? Colby ? ? ? Hi Colby, One of guys was asking me questions; 1. How many hotspot can connect to the gateway? My answer is it is dependend on the settings, I think it was set for 5 and I changed it to 20. 2. If a station use the repeater to kink to another reflector or repeater and forgot to unlink, is there a time duration that the repeater will auto unlink. Not sure what the answer. ? On 09/09/2018 12:43 PM, Colby Ross W1BSB wrote: It is, the first system using the ICOM stack of QnetGateway. There are a few others out there running it on hotspots and dongle type devices.? It was my pleasure to help ? Colby ? ? ? HI Colby, It was a pleasure to obtain assistance from you. This group is the best group I ever joined. You went an extra miles to help. When I did the XLX server, i reached out to different groups of ham and to other fellow ham and never get a response, but was able to run them after 6 months of not giving up with no linux experience. You have mentioned that My system was the first real system using the QnetGateway. Thank you for developing this software. ? On 09/09/2018 12:25 PM, Colby Ross W1BSB wrote: No problem. Don¡¯t forget to remove the port forward (10022 to port 22) for SSH, that should never be open unless you really need it to be. ? It was my pleasure to help. You are the first real system that is using QnetGateway outside of our test system we developed it on. ? Colby ? ? ? HI Colby, Somehow I have to get use to these commands. Thank you again and the time you have spent to assist me in setting up the gateway and the Icom repeater. ? On 09/09/2018 12:13 PM, Colby Ross W1BSB wrote: Well I saw you were trying to talk over the link command. ? So you issue the XRF072AL command to link, and then switch to Use Reflector CQCQCQ to talk through the reflector. ? Colby ? ? ? HI Colby, Hi hot spot stoppped. It was probably on his side. Do you want me to open the ssh so you maybe able to go back when you have the chance, about the smart quad? ? On 09/09/2018 12:07 PM, Colby Ross W1BSB wrote: Were you both using the CQCQCQ use reflector? That is the same as for a repeater if you were trying a local QSO to the repeater. ? Colby ? ? ? Hi Colby, We were testing and having a qso, but we could not hear each other. ? On 09/09/2018 10:46 AM, Colby Ross W1BSB wrote: Norm give me a call at 2073314368 ? Colby ? ? ? Hi Colby, Transmitted more than once at QW1BSB. Did you copy the voice? ? ? On 09/09/2018 10:37 AM, Colby Ross W1BSB wrote: I can hear you keying it up, try saying something. Leave it in your UR field at all times ? Colby ? ? ? I entered the "QW1BSB" on the direct input(UR) and ptt twice. nothing happens. ? On 09/09/2018 10:27 AM, Colby Ross W1BSB wrote: Put QW1BSB in the UR field of your radio you¡¯re using to communicate with your ICOM repeater. You may have to key it twice to get it to subscribe, it should come back with a confirmation tone once you have logged in.? I want to make sure the ircDDB routing portion is working as well, then I will try a reflector link with you to make sure. ? Just put QW1BSB in your UR field, key it once, and then key it again. You should subscribe, and I¡¯ll try to get in contact with you. Just leave QW1BSB in your UR field to talk on it. ? Colby ? ? ? Hi Colby, I just connected to the XRF072A reflector and transmit. It is working, thank you so much.Now I need someone transmit and start a qso. ? ? On 09/09/2018 10:08 AM, Colby Ross W1BSB wrote: Give me a few minutes. I'm not at my computer. But yes you can safely comment out the IP addresses in the config. The defaults work out of the box. Send me the output of the route command too please.? ? On Sun, Sep 9, 2018, 13:02 Nomis Bayan Jr. <nolyn78@...> wrote: Hi Colby, Run it again and here is the result. It has stopped. Do you want me to return the # on all the IP on qn.cfg? root@nolyn78dell:/home/nolyn1978/QnetGateway# systemctl restart qngateway qnlink ; journalctl -u qngateway -f
-- Logs begin at Sun 2018-09-09 09:41:14 PDT. --
Sep 09 09:52:10 nolyn78dell systemd[1]: Started QnetGateway.
Sep 09 09:52:10 nolyn78dell qngateway[1524]: VERSION QnetGateway-7.0.1
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Reading file /usr/local/etc/qn.cfg
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.login = [KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: OWNER=[KM6VLB]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.port = [9007]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: ircddb.password = [1111111111111]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.type = [icom]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.ip = [172.16.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.port = [20319]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.frequency = [448.26]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.offset = [0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.range = [15]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.agl = [30]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.latitude = [32]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.longitude = [127]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: module.b.url = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.local_irc_ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.ip = [0.0.0.0]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.external.port = [40000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.ip = [172.16.0.20]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.internal.port = [20000]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.regen_header = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.aprs_send = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: gateway.send_qrgs_maps = [true]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.host = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.port = [14580]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.interval = [40]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs.filter = []
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.qso = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.irc = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: log.dtmf = [false]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.outgoing_ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.echotest = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.dtmf = [/tmp]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: file.status = [/usr/local/etc/rptr_status]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.port = [18997]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: link.ip = [127.0.0.1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.wait = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.play.delay = [19]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.echo = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.voicemail = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.remote_g2 = [2]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: timing.timeout.local_rptr = [1]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: Repeater callsigns: [KM6VLB-A] [KM6VLB-B] [KM6VLB-C]
Sep 09 09:52:10 nolyn78dell qngateway[1524]: aprs hash code=[17083] for KM6VLB
Sep 09 09:52:10 nolyn78dell qngateway[1524]: startWaiting for irc connection status of 2
Sep 09 09:52:10 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:11 nolyn78dell qngateway[1524]: IRCClient::Entry: connected2
Sep 09 09:52:15 nolyn78dell qngateway[1524]: irc status=0
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setBestServer s-grp1s2
Sep 09 09:52:17 nolyn78dell qngateway[1524]: IRCDDBApp::setCurrentNick km6vlb-1
Sep 09 09:52:20 nolyn78dell qngateway[1524]: irc status=1
Sep 09 09:52:21 nolyn78dell qngateway[1524]: IRCDDBApp: state=2 choose new 's-'-user
Sep 09 09:52:22 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=1
Sep 09 09:52:24 nolyn78dell qngateway[1524]: IRCDDBApp: state=3 tableID=0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: QnetGateway...entering processing loop
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQTH: KM6VLB_B +32.00000 +127.00000 La_Mesa,_CA_________ ____________________
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRURL: KM6VLB_B
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRSW: KM6VLB_B QnetGateway-7.0.1
Sep 09 09:52:25 nolyn78dell qngateway[1524]: IRCDDB RPTRQRG: KM6VLB_B 00448.26000 +000.00000 000.01 0030.0
Sep 09 09:52:25 nolyn78dell qngateway[1524]: g2=4, srv=5, MAX+1=6
Sep 09 09:52:25 nolyn78dell qngateway[1524]: APRS beacon thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: get_irc_data thread started
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for ICOM controller...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Trying to connect to APRS...
Sep 09 09:52:25 nolyn78dell qngateway[1524]: Waiting for up to 15 seconds for APRS_HOST
Sep 09 09:52:26 nolyn78dell qngateway[1524]: Connected to APRS
Sep 09 09:52:27 nolyn78dell qngateway[1524]: IRCDDBApp: state=6 initialization completed
Sep 09 09:53:14 nolyn78dell qngateway[1524]: irc status=7, probable connect...
? On 09/09/2018 09:49 AM, Colby Ross W1BSB wrote: You can comment out the IP addresses in qn.cfg, as the defaults just plain work. ? Colby ? ? ? Hi found the error I just change the IP back to 172.16.0.20, I made an error and entered 172.16.0.1. Let me run again. ? On 09/09/2018 09:41 AM, Colby Ross W1BSB wrote: Actually, I think I know what might be wrong. Restart the server, I think more than one instance of qngateway is running causing a bind issue. ? Reboot the server, and when it comes back up, type journalctl -u qngateway -f and see what it says. ? Colby ? ? ? Show me ip a and /etc/network/interfaces again ? Colby ? ? ? Hi Colby, It is working. Except it say "can't open " and "Failed to bind 172.16.0.20". I do not know how to stop the so I could copy the rest. ? On 09/09/2018 09:00 AM, Colby Ross W1BSB wrote: Alternatively you can put ¡° before /tmp and after qnvoice so it reads qnvoicefile = ¡°/tmp/qnvoice.txt¡±
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
--
--
-- Regards,
Nomis A. Bayan Jr.
|
Tom Early
Russell, KV4S