开云体育

Looking on a.m.a.z.o.n. I found that exist 5.5/2.1 and 5.5/2.5. I can not find 5.5/1.5, are you sure about that internal measure? Nicola

Hi Peter, thank you very much I'll look for this type then clear skies Nicola <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Privo di

Hi, many thanks for the info but...it is unreadable, the jpeg resolution is too low to be readable, could you please post it again? Clear skies Nicola

It's 5.5 mm O/D, 1.5 mm I/D, Centre positive. If possible get the type with internal springs - they make better contact. See attached. Best of luck, Peter http://www.madpc.co.uk/~peterv Approx. 55 deg

Unreadable for me… Von: [email protected] [mailto:[email protected]] Im Auftrag von jlm0rris Gesendet: Sonntag, 2. April 2023 14:45 An: [email protected] Betreff: Re: [QSI-CCD] Jack power connector

Thank you so much, Bernhard! Perfect images as always. Best Wolfgang Von: [email protected] [mailto:[email protected]] Im Auftrag von Bernhard Hubl Gesendet: Sonntag, 2. April 2023 10:07 An:

This is for the 500 series cameras but should be the same for the 600 series.

Hello group, ‘Nebulae in Scorpius’ is the topic of part #8 of our image presentation, where we want to share the results from our astrophotography-trip to DeepSkySafaris in Namibia. In this part

Hello All, I have a remote observatory and currently I can not power on the CCD, but sometimes I can. As a software programmer, things for me are always 0 or 1 so I really don't know what could be

Dear All, does anybody of you have the specs for the jack connector that provides power to the CCD camera? I might be using the wrong one as sometimes I don't get contact. Thanks a lot! Nicola --

William, see my reply to David,? it works.? Many thanks to you both, Eric

David, that seems to have done it.? I have all connections, mount, focuser, QSI and QSI filter wheel connecting up and correct filters showing and changeable.? I also managed to get these all

William,Sounds very promising.? I'll give it a go over the next day or so.?Thank you both. Eric

Wiliam thanks, David Davies has also sent me a version that he says works on his system.? So between the two of you hopefully I will get something that works if not then I can try your suggested

Hi Eric. Just to confirm David's reply, I dug out my old QSI530WS and installed the latest QSI drivers from the QSI support site, 2020.07.30, on a clean copy of Windows 10 Pro with a clean install of

David, thanks very much I'll give these a try. Eric

Hi Eric, I'm using QSIinstaller-2020.07.30. A copy of mine is here: https://www.dropbox.com/s/7kr1wbbqzkn2qcs/QSIInstaller-2020.07.30.zip?dl=0 I suggest you uninstall any existing drivers first. I'm

Hi Eric. I’ve never used NINA with my QSI cameras, only MaxIm DL under the overall control of ACP when using the observatory for live and scheduled observing, TheSkyX Pro for maintenance when

Hi William, I have downloaded them and thanks. Can I confirm that at some time you have had the QSI camera working via NINA ver 1 or 2. Regards, Eric

Hi Eric. Here is a download link to my archive of QSI drivers: https://drive.google.com/drive/folders/1XP-9pfkZg6yCRF0ol-GnMnKZJVH5cXpc?usp=share_link My QSI cameras are currently retired and I can't