Re: NINA+QSI 532 camera and on camera filter wheel
|
Wiliam thanks,
David Davies has also sent me a version that he says works on his system.? So between the two of you hopefully I will get something that works if not then I can try your suggested test.
Best wishes.
Eric
-----Original Message-----
From: WILL B <william.bristow@...>
To: [email protected]
Sent: Tue, 14 Mar 2023 9:18
Subject: Re: [QSI-CCD] NINA+QSI 532 camera and on camera filter wheel
Hi Eric.
?I¡¯ve never used NINA with my QSI cameras, only MaxIm DL under the overall control of ACP when using the observatory for live and scheduled observing, TheSkyX Pro for maintenance when creating sky models for a Paramount mount in my own observatory and some Linux drivers written specifically for our remote observatory software using the original QSI SDK.
Your error message:
¡°Ascom driver error?Unable to connect to QSI internal filter wheel.
Reason Property read QSIcamera.CCD Camera focus offsets is not implemented in this driver¡±
Appears to be a QSI ASCOM driver error that at a guess is only being relayed by NINA.
With this kind of ASCOM problem I would recommend using the ASCOM developer ConformU tool, connect to the QSI filter wheel in ConformU and run the ConformU filter wheel tests, if you see the same error reported that would confirm there is a bug in the QSI ASCOM driver and it is ATIK¡¯s problem to resolve, if the ConformU filter wheel test pass ok then that is a problem for the NINA devs to fix.
You can forward the run log of the ConformU test to either ATIK or NINA support depending on the outcome although as far as I can tell the QSI brand is dead as far as ATIK software support goes.
HTH
William.
|
