Re: NINA+QSI 532 camera and on camera filter wheel
|
William,
see my reply to David,? it works.?
Many thanks to you both,
Eric
-----Original Message-----
From: WILL B <william.bristow@...>
To: [email protected]
Sent: Tue, 14 Mar 2023 14:32
Subject: Re: [QSI-CCD] NINA+QSI 532 camera and on camera filter wheel
Hi Eric.
Just to confirm David's reply, I dug out my old QSI530WS and installed the latest QSI drivers from the QSI support site, 2020.07.30, on a clean copy of Windows 10 Pro with a clean install of ASCOM platform 6.6SP1 and ran ASCOM ConformU tests on the camera and filter wheel in 64bit mode, all tests passed ok.
Then I installed a clean copy of NINA x64 v2.1 and was able to connect to both camera and filter wheel (after first clicking the "cog" symbol in NINA to set up the camera and filter wheel options and name the filters).
As David mentions, as long as you make sure to uninstall the old QSI drivers first, and make sure you are on the latest ASCOM platform then you should be ok.
HTH
William.
|
