开云体育

I think everyone probably agrees that Hans can't possibly stock different colors for the case. If someone is really unhappy with a black case, it can't be that hard to prepare the existing case for a

Keeping a stock of multiple colored cases could cause the price to rise significantly. _._

I don’t understand why anyone would sit in the hot summer sun and not be able to place the minimal amount of shade on the rig with the box/case/knapsack that one brought it there with. If nothing

Hi, I built my QCX 20 meter ( serial # 5408 ) a few weeks ago and it worked at the first power on. So I was very happy. I checked this group on a regular basis and found the topics discussing low

Hans, Can I suggest that each kit have its own unique colour, with the QCX being natural aluminium, the QSX black, perhaps, and so on. Ross, vk4fawr

You have hit the nail on the head Hans, do what you think is the best business decision for QRPLabs.? It is ridiculous to think that you can provide everyone's favorite color, or that you will sell

Is the bottom of the T1 core that appears to be uncoated truly that? I have stripped the enamel from the S3 winding just a little to far, this is the end toward the top of the PCB that passes under

Check polarity of electrolytic capacitors. 73 Mirek OK2BUH

Greetings fellow QRPLabs fans, I will be going to the VERON rally in Zwolle along with Jan Verduyn G0BBL. Will anyone else be there? May be we could take some pictures so Hans can put some faces to

Chris This seems to show that something is wrong after the pot. Q7 failed? Shorting to ground. And if not give us the actual voltages at Q7 and IC10 This makes me think of bad connection somewhere,

Good morning I’ve recently finished building my 30m QCX, board rev 4.?Completed alignment ok (after fixing poor joint on T1).?4w output at 13v and had a brief ‘599TU’ style qso with a Spanish

Thanks Hans, That IS small, the QSX front panel width is shorter than the U3 case depth! any idea on rx / tx current draw, so we can judge battery requirements? I'll have to get measuring.... My

Hans, To simply things it might be best to offer a natural aluminium finish. People could then paint or anodise the case to whatever colour they want. Painting Aluminium is no big deal. It just needs

Personally I would choose black when purchasing if it were an option. That said, if there is only going to be one color and it's not going to be black, please make it something 'neutral' like silver,

Hi Alan QSX enclosure outside dimension is 145w x 68h x 73d mm. The heatsink protrudes 25mm at the back panel. The knobs protrude 10mm at the front panel. Even despite not really having an idle moment

Hi Al, for trail carry I use army surplus pouches mainly for convenience & bash protection here in the UK rather than thermal reasons..... though i'm sure that would also provide the required

Even other colours wouldn't be Ok in direct sunlight. Non-black does help... but does not ELIMINATE a heating situation. Here in QTH KM46 with harsh wall-to-wall, floor-to-ceiling blue sky and

My first FT-817 died the first day it was used in the UK sun.? The case was too hot to touch when it failed (used on receive only so not due to Tx abuse).? The VFO control stopped working.? Maybe

Absolutely, I understand the MOQ and volume pricing requirements to some degree, I've brought (very) 'niche' small run products to market before, I suggested the extra cost suggestion as a possible to

Hi Just to make it simple for Hans - Make the cases for the proposed QSX all in anodised bright RED No need for polls, ordering simpler etc LOL (Think of it as a version of the Ford model "T" system)