开云体育

Last time I tried this was with a Sirf3 chip and it worked as expected, I don't see why this should be different with the MTK modules. The settings are volatile thou, so when V_BAT is lost you are

The frequency is very important as the window is only ~200Hz wide. It is the tricky part, as a local receiver can hear lots of tones (100/120Hz spacing not too uncommon) from a closeby WSPR

I have just resurrected my 'old' completed Ultimate QRSS kit V.2.01 and attached it to a newly built QLG1 Receiver Kit, but it don't work. The QLG1 is pinging its one second pulse and the data stream

There is now an option on?http://wsprnet.org/drupal/wsprnet/map ( http://wsprnet.org/drupal/wsprnet/map )?page to filter out (balloon) calls/telemtry starting with Q and 0. ? Nice work Wspr net!!

Hi Petr Not at all a stupid question. I intend to write something about upgrading QCX firmware but I have not found the necessary available microseconds yet. You can do either way. If you want you

Hi all, sorry for maybe stupid question as I am quite new with QCX and even more in programming :( Is it possible to re-flashing the ATMega for latest f/w while it is in QCX board or should I remove

Mike, I tried it also on ...co.uk but the same results... Thanks for direct link. I got it. 73 - Petr, OK1RP

Or you can buy now....... http://www.ebay.co.uk/itm/12-Volt-2800mAh-Rechargeable-Li-Ion-Cell-Battery-for-Wireless-Mouse-Speaker-/201600508684?epid=1864992580&hash=item2ef053a30c:g:y40AAOSwcLxYGVKu (

Petr It ?maybe in .ebay.co.uk? This is the

eBay can not find it using the Item number... Petr, OK1RP

Hi All This may provide a useful rechargeable 12V PSU for the QCX See ebay item?372079355460 (currently ?7.62) 73 Mike? G0CVZ

Hi all, my new 40m QCX transceiver kit (ordered by 11Aug17) sn: 246 arrived today safely. Time to heat-up the soldering station... Just notice... it arrived with 1.00a fw rev. so it had to be so long

Hi Keith Anything you write about that, I would be pleased to be able to put on the QRP Labs website to help others. Hopefully if there is any difference such as this, the accurate one is

Updated to 1.00b and sidetone problem solved. I used an arduino uno board programmed as arduino as isp with six jumpers and avrdude. It took a while to work out how to do this I think I'll write it

Hi All! has anyone come up with a 3D printer enclosure design for the QXC and are willing to share it with the group? thanks,? Paul K0ZYV

Hans G0UPL wrote.. Thanks - ordered! I don't know when I'll need it, but I'll be ready to go. Andy - if there's a serial number for the programmer, I'll throw it in free! -- 73 Keith VE7GDH

The film company said they can not sell to anyone in the USA for security reasons. Strange,but that is what the guy told me at the USA branch.The company name is VECTOR packaging. Sealing the film can

Hi, Has anyone sent commands to the GPS Rx to suppress unwanted NMEA sentences, i can see all the enabled sentences in RealTerm. So it should be possible using the info from YIC to just send the RMC

Can't you register a private company NXZ balloon company. Or find a ham employe. How do you get the joints gas tight?

Do I get a free tracking number wth that delivery option ? ;-) 73 de Andy