开云体育

I found the part where Eagle tells you how many drill holes there are. The PCB is 85.55 / 59.50mm and there are 1108 vias, 2 holes, and 116 pads, a total of 1226 drill holes. So just over 24 holes per

Oh, wow - nightmare! I didn’t realise - hope you manage to get them sorted and don’t let it stress you out too much xD Haha! “Do your job”. It’s not like you would put them there for the fun

sorry to keep on at you My lora tracker with the pico balloon? ? firmware has been sitting with a clear view of the sky for the past 90 mins with no gps lock in order to start a link request to

So love that, moaning about crucial via’s whatever next, machines complaining of solder mask :-)

Thanks, Ryan - hopefully we can have a QDX-QDX QSO soon. -- John AE5X https://ae5x.blogspot.com

Hi Derek That is not very likely I'm afraid... I'm worried there may not even be enough to fulfil the first batch of orders. I placed stock in the shop but the kit took 24 orders MORE than it should

Hi, mine arrived in Cheshire yesterday.? UK shipments are going well.

Hello Hans, Glad you’ve managed to source some more! I never got round to asking on here but I was 30mins late for the first batch before it ran out (despite setting alarms ?) - if there are any

Ok. I was thinking a faulty BS170 could affect the output capacitance or induktance and give all sorts of frequency dependant problems. I would definately suspect them if the rig once had worked. If

Thanks, I missed that from Hans. 73, -- John AE5X https://ae5x.blogspot.com

Thank you Shirley - and I do appreciate your reply - and sure there will be people reading your reply with big interest I will do some testes when the QDX arrives - and see what sort of results I

Exactly the same here Bill, but over in Kings Lynn, Norfolk. ?Friend just around the corner from me got one yesterday as well so it looks like Norfolk UK managed to get a good share from the initial

It was “almost meshed” and the photo showed maybe 50% meshed in the “correct” one. So “two peaks” is the operative word. Yes, definitely two peaks. David J. Wilcox’s iPad

Julian, No matter how much capacitance I added the stator plates were exposed about 5% (I am guessing) on either end. That was my two peaks. The caps were from a full set that Doug Hendricks of QRP

You're right. I messed up the math when I did it in my head to write that post. Three to six watts IS the correct output of the QDX but the dBm conversion was wrong, oops! Six watts would be somewhere

Your lab is far better equipped than mine! That Siglent is a lovely piece of gear but it's way beyond my budget. I use a TinySA and an Airspy receiver for RF testing, just as I suggested in my post,

Hi?Bj?rn, Yes, I had thought of that... Were I able to peak the LPF at a lower power, then yes, I would suspect one of the output BS170s, but the most obvious problem at the moment is the difficulty

Two to four watts.

Hi Curt This all happened in January 2020 or so which seems like a whole other era ago. So my memory is a bit hazy. But when the PCBs arrived with the SMD inductors on, I noticed that the harmonic

Have you concidered a faulty BS170 might be the problem? -- Bj?rn, SM0SBL