开云体育

Bill Thanks for sharing your adventure, that 20 feet and a lot of loading can do it. Can you elaborate on the unun, and I think you are suggesting no other impedance matching? Nice

OK, thank you..it's not a "mystery" if we get updates.? I have plenty of patience as long as I know whats going on.? I don't think that is unreasonable.? Meanwhile, I have plenty to keep me

Hi Bill and others, Yes -?WSPR on 630 M?is fun! I also went to 1 watt about a week ago on 630M with a U3S.? It got me out of the US southeast! I'm using a?6 meter tall Marconi tee vertical, top

For heaven's sake, if you do print it, do it in duplex to write on both sides of the paper. It takes longer but uses only half the amount of paper. Then punch holes and put it in a 3-ring

Creating hashtag for GPS -- Wes AE6ZM Hereford, AZ

Just creating a hashtag for this kit. -- Wes AE6ZM Hereford, AZ

Hi Jess Please take it off-list, email sales@... and please explain your problem (what you ordered, what is wrong with it), we will fix it. 73 Hans G0UPL http://qrp-labs.com

What should I do since I got the wrong LPF parts with my QCX?? Sent from my iPhone

OK, Jean-Claude and Hans, Thanks. Moving right along... Kent. ________________________________ Sent: Saturday, December 16, 2017 4:08 PM To: [email protected] Subject: Re: [QRPLabs] QCX 100 uH

Hi Mark, all The QRP Labs shop on eBay really *IS* QRP Labs... it is an experiment to see if this is a viable sales channel. In the first month of this experiment, only three QCX kits were sold

Hi Carl Normally all orders by default are going into the same queue. But if you have any specific need or request please contact sales@... and we will accommodate your wishes. 73 Hans

As an example I installed two 22uH for L5 and L6 and uP started up fine. -- Wes AE6ZM Hereford, AZ

If I'm understanding you correctly, I think this is actually wrong, as AFAIK the "power" setting only applies to WSPR.? That same two-digit entry on DFCW and other modes determines which of perhaps

Hi Jim, all There is no mystery. The shipment office were overloaded far beyond normal capacity, by the unexpectedly large volume of QCX orders (now almost 2700 have been ordered in total). I am

Hi Jess No PCB is normally supplied with the LPF kit in the QCX (which is also consistent with the QCX parts list). The LPF compoments are installed on the main QCX board. For reasons of logistics

Yes, as Jean-Claude says. Later batches of kits were supplied with 47uH. The value isn't critical. 73 Hans G0UPL http://qrp-labs.com

Yellow Purple Black is 47uH. These inductors can be 100 or 47 uH, not critical. Jean-Claude

Jess You got a nice bonus with the prior example, another chance to do it again! The board is required for the U3S kit, but not for qcx. Winding these things isn't so bad,? use a magnifier as

Shipping has become a mystery.? The shipping website has not been updated.? Well, it's not the end of the world.? A bit discouraging is all. -- de K2TL.. since 1964

Jess, There was no PCB in my 30 meter QCX LPF bag. Mike M. KU4QO