开云体育

The same (?) problem here. After loading FW 005, restart, Menu ... USB serial ports 1, QMX off - on, check if 'USB serial ports 1' --> device manager shows no related COM-port and no related audio

Beste om's Als ik bij de qmx+ gelijktijdig bij gigantische de pwr en menuknop indrukt "intialiseert de setup Eeprom", alle instellingen zijn weg, is dit een bekende feature? Of een bug in de firmware

No COM ports on Win 8 as well as on Win 10....

Oh. Well that's frustrating... 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Thanks Ron, I re-worked a few solder joints and was able to bring things to life. Performed alignment and places in case, but now have a couple of other issues to troubleshoot. 1) on power-up, LCD

Yes I restarted it. No com ports. I just went back to 04 and the ports are there again. Tony ________________________________ Sent: Friday, April 25, 2025 10:56 AM To: [email protected] Notification

Did you restart QMX? The COM ports setting takes effect oniy on the next time QMX is powered up. 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Re: fw 005 and Windows 11 com ports. No com ports are recognized all get the "The last USB device you plugged in malfunctioned" using 1,2,or 3! Falling back to 003.

Hmm. Just tried this on my Windows 11 system. Now I have NO com ports. I tried different settings from the front panel but I get no com ports for any of them. I will have o go back to

P.S. please note that for people with systems having serial device identification by ?D the suffixes of the three serial ports are now if00, if05 and if07. 73 Hans

I just finished my first kit, the QCX Mini. I have very little experience with soldering, other than a few arduinos and such, so I'm pretty new to this. When I go through the alignment steps I find

Hi all I updated the SSB beta testing webpage of the brave, here: https://qrp-labs.com/qmxp/ssbbeta.html and released firmware version 1_01_005 to it. There are TWO changes only. Firstly, I have

Laptop computers often have power saving features that can be configured to turn off some of the power hogs when they are left unused for a while. You might look at your power saving settings, and

Hi Hans, Is there a maintained Feature Request list available somewhere where we can check if what we’d like to see has already been asked for, and perhaps add a vote? I know posts can get lost in

Last Sunday I made a couple of SSB contacts on 20m with my handheld QMX and the EFHW antenna, using the inernal mic only. I also joined the net on 14.300MHz to ask how I sound over SSB. I got 58 from

Ok, replaced Q102 and D109 and at least the symptoms are different, but still not working. Quick synopsis here and I'll start documenting the waveforms and voltage levels. Replaced Q102 and D109 (Q111

Good advice. I have and have had a whole bunch of Baofeng branded / Baofeng "style" hand mics (e.g. generic no name brand K type connector things), they mostly work fine but some of them do use very

jeremy, you should check for continuity between IC2 Pins 2,3,4,5,6 & 27 to LCD pins 11,12,13,14,6 & 4 respectively. If any are missing check soldering on the LCD, IC2 socket, and pins and sockets on

Angelo, There are a number of different factories that produce microphones for Baofengs.? I have bought 6 of them so far and everyone is made differently. I had one that didn't work at all on the

Since I still had a 5V SMPS board available, I decided to try installing it in the QMX along with the 3.3V SMPS board and turn it on. At first, I only used 7V and limited the current to 200mA. And