开云体育

If it is a windows computer, the serial ports will be COMx, not /devxxx Roger ?Get BlueMail for Android ?

I just restored power to my QDX and it has as problem/s I am using? DELL E6510 laptop running Win-7 SW and using WSJT-X v2.6.1 SW 1 - When Power is added to the QDX it flashes normally maybe

Good afternoon from sunny Southwest Florida ! Looking for real world experience and 'thoughts' on the audio output level to WSJT-X when running in DIGI modes. I'm seeing about 30dB of audio 'input'

Hello Ron I am reiewing your post from december. I have new kit built High Band QMX which will connect to my antenna normally, but show high SWR/protection if I place tuner of amplifier in the line.

Can someone with a DSO capture a scope trace at the L and R outputs of IC401 as a string of dots or dashes are being produced? I don't have the right gear to do that. It might shed some light on

QMX mp3

Hello everyone, I have this noise too. Every dit or dah is followed by a “knocking sound”. My sound recording with my smartphone on the headphones isn't great, but you can hear it. Recorded on

I see the same with my hiband QMX. Image sweep via console -2dB at 20 meters and after switching bands and returning to 20meters? -28dB. 73 Igor oh2jxa

Back at it again.? Three different USB cables, which work with other devices with two different computers.? Still no go,? This is the only item purchased from QRP Labs that I have had an issue

If you install the navigation software you can select which of the available systems it uses but I think it’s only L1 (as are 99% of the cheap GPS antennas )

It’s L1 only. Besides digging it out of specs, a multi band receiver at these price points would be a feat. L2 alone is less accurate than L1 due to ionosphere effects, so they are used together.

My few cents: I have absolute volume and side tone set at 48. If I do not crank up the volume (when receiving strong and medium signals) then the clicks are not an issue. In case of faint signals

Just adding my experiences to the thread. This is what the sidetone on mine sounds like. Sidetone relative, but I found no settings I tried made much difference. This is 20M into a dummy

Just to clarify, I meant the same as one another, not the same as yours. 73, Mike KK7ER

Thanks, Hans (and others who wrote)... I don't need a priority - I'll wait my turn... just didn't know when I might expect it... Now I understand the back-log! Have a great day! 73 Larry AH6AX

Hi Hans, Wondering what your thoughts are on this now we have colected quite a few responses? It seems overwhelmingly like this is a real problem preventing many of us not using the QMX, or having to

I posted this fix a couple months ago.? Without the relief cut, the boards flex when the case halves are assembled.? I assume most don't experience this binding. -- 73, N4TVC, Randy

Noting there has been very few responses advising that clicks are not evident (I counted one - with AGC off), perhaps the thread title is not helping as anyone who reads it, may skip over it thinking

As an aside, maybe a bug, maybe something for a future revision (Probably hard to fix), I found a minor mechanical interference that you probably already know of.? It's between the mounting screw of

They were the same in my Rev 2 kit. 73, Mike KK7ER