开云体育

Alan and the group, My WSJT-X v 2.5.4 gives my the same options. I changed the input to MONO and no reception. I changed it to RIGHT and instant contact. I took all the input from the group and

Karl, I joined C509 but not seeing messages show up. Do I need moderator approval? TNX! Bob WA1EDJ yahoo.com@groups.io> wrote:

Jim, Try looking on the new C509 group. I think somebody listed some of those on there. 73 Jim N6OTQ protonmail.com@groups.io> wrote:

Adam, The audio level is set correctly. Transmit shows S???? 3 blinks then pause PSK reporter shows reception reports up to 6000 miles on 3 bands. 80 is closed now. Also, I opened PuTTy and

Hi Don I keep on hand several ARRL reviews as reference for when I am trying to compare QRP Labs rig performance with others. In particular I have the ARRL reviews of the Elecraft KX2 and K3S. These

Great idea Karl. I just joined! Bob WA1EDJ yahoo.com@groups.io> wrote:

Here is the irony. I knew that this was a problem, and I know I should have checked it first or spent the time setting up my regulated power supply, but in my excitement of finishing the kit, I did

I'm pleased to report after meticulous and painstaking care in following the (detailed and excellent) directions I have completed the construction of my QMX kit. The troubleshooting steps in the

Your audio device looks like a Mono only input?

I measured about 10 millisecond delay from key to beginning of transmitted element. Quite significant above 20 WPM, nearly impossible at 35. I didn't measure much difference between RF and the

Dean, What version of WSJT-X? Windows? Any VAC? My Windows/WSJT-X v 2.6.1 shows all 4 of my QDXs as Mono/Left/Right input. Mono/Left/Right/Both output. I have presumed that is set by what the OS

When I started to tinker with usdx pcb designs I got all my parts from sources like aliexpress etc. And learned the hard way that nothing is what is advertised spec wise. I spent days to figure out

Dear Karl, You can put me down as a member of the C509 Group.?? I have a Large stash of parts and a lot of QRP Labs kit parts. Especially for U3S, QCX, and now some for QDX. and I don't mind

I believe Walmart just allows other vendors to advertise on there website.? Similar to what Amazon does. Glory to God in the highest, and on earth peace, good will toward men. Luke 2:14

Adam, Concerning the audio question... In WSJT when setting up the radio under the AUDIO tab I see QDX for input and output. But, when I click the right side drop down menu I can only put the input

Allison, Thanks for the reply. My set up is a 60 something foot wire up about 35 feet. It is connected to a ceramic thru-hull fitting. The 100 watt UNUN is in the building, grounded to a 8 foot

Dick, That is very interesting concerning the computer processor speed. It is a fairly new machine running Windows 11 and does constant computing. I will shut down all processes and only use WSJT and

mike/w1mt <w1mt.qrp@...> wrote: In bash, you could also use Ctrl-R and type putty. I just added QMX profile to PuTTY and use: putty -load qmx I also have an udev rule so it always symlinks

I have started a group named "C509" right here on groups.io for parts. When my QMX was missing an SMD capacitor C509, Rick, NF6G sent me a few in an envelope. The intent of group C509 is for all of us

Don, I assumed the added current limiting resistance. It’s just that I had not seen this as a recommendation to protect the QMX and control the usable voltage to the advised 12 volts. A friend