开云体育

How does one go about getting on the waiting list ? 73 , Charlie , W5COV

Just ask and Hans will add you on the list...hi hi Mike WE0H Charlie , W5COV wrote:

I have no problems keeping this group kit oriented, but is it just me or is that Knights list a pain in the tuckus? The latest archive posts are from 08, so I can't figure out how to see more recent

Hi Ed, I am finally getting back to this as life, work, etc. has a habit of interfering with other fun at times. I went back and did a better job of matching the rf out to a good 50 ohm load. After

Hi Newt, Sounds like you've got it nailed. Congratulations. A 'scope is a real handy thing to have around; I'm sure you'll get a lot of use out of it. 73, ed - k9ew

Hi all - Just joined this list and hope I am on the waiting list for the next run of 30m kits. My home QTH is very noisy electrically (power lines and several industries nearby) so HF receive

I emailed the author of Argo regarding my problem using an external USB sound card. Alberto got right back with this reply. "Argo is a very old program, that I wrote with the simplicity for the users

Hi Guys, I thought I would post this to let you the progress so far. I have all the active and passive components in stock and am just waiting for the PCB guys to deliver the boards and a parcel of

I braved the 100 degree temp today and got my beacon up on the air at about 2230utc(630pm cdt). Freq is about 10.140070 with some instability due to high temp. Beacon is mounted in plastic box at

Hi Paul, 10.140010mc is what I just seen on your signal. Mike WE0H EN35hj pgdaulton wrote:

It is on 10.140001mc now. Mike WE0H EN35hj

MIke send me a capture, you are my first report. I see my base line at 10.140035 right now at 930pm cdt. Freq moved around until it got heat soaked and then it settled down.Just got back from

http://www.we0h.freehostingcloud.com/argo/ Have a look. You are in there just slightly below 10.140000mc. The top of the signal is at 10.140002mc right now. It moves up & down as time goes on. I am

Mike, I finally see my k0nwt on your grabber - a bit low this a.m. - at 10.13995 I will adjust tonight when I get home from work. I'm in the EM73ut grid. 72, Newt k0nwt

Hi Newt I think I see you on http://www.we0h.freehostingcloud.com/argo/ at 10,139,920 / 10,139,950. Massive 30Hz wide FSK CW ;-) As well as adjusting a bit in the upwards direction, you probably

Very hard to figure out the message with his signal being so wide. Looks like my Grabber is running fine. Calibration is within 1hz calibrated to 10mc WWV signal daily. Mike WE0H EN35hj hans

Hans and group, Sorry about taking up so much bandwidth!! - I will lop off another bit of the trick cap this evening when I get home. I will target 5 Hz for my FSK CW. 72 (+30) Newt k0nwt

I cut off a bit of the 'gimmick' cap and adjusted the signal to ride between 140077 and 140082 according to the WE0H grabber. Thanks Mike - I did my adjustment this evening using your grabber as

Hi Newt, Cool, glad the Grabber is of use. When your signal comes in here it is strong. I see it is gone right now but I'll watch as the night grows older...I will test and calibrate my Grabber daily

I found a link to n3zi's site where he has a gen coverage rx kit suitable for 30m beacon op with dds or xtal control. I will have to check microprocessor xtals for combo that will cover 10.140.