Hi Newt
I think I see you on at 10,139,920 / 10,139,950. Massive 30Hz wide FSK CW ;-) As well as adjusting a bit in the upwards direction, you probably want to snip a bit off the "gimmick" capacitor, so that the amount of shift comes down to a more reasonable 4 or 5 Hz.
73 Hans G0UPL
toggle quoted message
Show quoted text
--- In QRPLabs@..., "Newton White" <k0nwt@...> wrote:
Mike,
I finally see my k0nwt on your grabber - a bit low this a.m. - at 10.13995
I will adjust tonight when I get home from work. I'm in the EM73ut grid.
72,
Newt
k0nwt
----- Original Message -----
From: Mike-WE0H
To: QRPLabs@...
Sent: Tuesday, June 15, 2010 22:47
Subject: Re: [QRPLabs] 30m beacon on the air
Have a look. You are in there just slightly below 10.140000mc. The top
of the signal is at 10.140002mc right now. It moves up & down as time
goes on. I am going to install a crystal heater in mine.
Only 64F up here today. Been cold for many days.
Mike
WE0H
EN35hj
Paul D wrote:
>
>
> MIke send me a capture, you are my first report.
>
> I see my base line at 10.140035 right now at 930pm cdt. Freq moved
> around until it got heat soaked and then it settled down.Just got back
> from Wallyworld, themp on bank sign downtown was 85 degrees at 9pm. heat
> index still probably at 100, very high humidity.
>
> I have a new battery for my lowfer beacon, on charger now will install
> it tomorrow.
>
> 73 Paul
