MIke send me a capture, you are my first
report.
?
I see my base line at 10.140035 right now at 930pm
cdt. Freq moved around until it got heat soaked and then it settled down.Just
got back from Wallyworld, themp on bank sign downtown was 85 degrees at 9pm.
heat index still probably at 100, very high humidity.
?
I?have a new battery for my lowfer beacon, on
charger now will install it tomorrow.
?
73 Paul
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, June 15, 2010 7:33
PM
Subject: Re: [QRPLabs] 30m beacon on the
air
?
Hi Paul,
10.140010mc is what I just seen on your
signal.
Mike
WE0H
EN35hj
pgdaulton wrote:
>
>
> I braved the 100 degree temp today and got my beacon up on the air at
> about 2230utc(630pm cdt). Freq is about 10.140070 with some
instability
> due to high temp.
>
> Beacon is mounted in
plastic box at center of dipole. Tx power into a
> resistive dummy load
was 80mw(2volts peak to peak). 5volts dc power is
> run up to tx
through rg59 cable tv coax.
>
> Reports welcome.
>
>
Paul Daulton k5wms
> beacon k5wms 10.140070mhz qrss 3 intermittent when
attended
> beacon wms 185.3018khz qrss 30 24/7
