开云体育

Not sure but maybe try setting the mic source to USB instead of ext mic. Tony AD0Vc ________________________________ Sent: Saturday, March 22, 2025 10:40 AM To: [email protected]

hi all, running 1.01.003, can still run ft8 using digi via wsjtx as before no problems but running fldigi, trying to run psk31 - radio is going to usb, tune/transmit have no effect. (i believe i have

QMX+, updated to 1_01_003 without any problem. Calibrated without a problem. Already couple SSB contact made. The issue I observed is when you transmit and want to play with equalizer settings at the

Haaaa I did exactly the same last night, even though I had read this post... I had my QMX+ driven by WSJT-X and was operating 160m WSPR. I started it and left it running. About 4-5 hours later I came

Hello Hans, fake it disabled did the trick. Enjoy?? Spain? y hasta luego -- Martin DK3UW

Hello Martin > My QMX is COM 7 on the win 11 PC and I have set WSJTX accordingly. Also on This isn't a limitation of QMX. It's a limitation of the USB Virtual COM port device class. It's one-to-one,

On 3/21/25 I had a CW practice / rag chew session on 20 meters. I worked seven stations. I even worked some DX: Date / Time Call Bnd Frequency Mode Power Rec Snt Name SPC# Comments Off 3/21/2025

Brien, I'm noticing the same thing since doing the Calibration, 20 meters is lower than all the other bands. I have about 2 watts CW on 20 meters, but SSB is only .5 watts read on a external peak

I saw weird calibration results, so my question is should I compare performance with/without calibration? I assume a factory reset removes calibration or just turn off Phase and Amplitude distortion

This may be independent of SSB software version.? 20 meter calibration is different than the other bands.? I get no power output indication on the meter during 20m LSB and USB IMD Sync.? I have

Stan Q301 was indeed the culprit! I have a replacement coming that should resolve the issue. Appreciate the excellent suggestion and thanks all for making this list so useful. 73

I rewound the L510 & L513 to the specified winding turns and the output on the 30M and 40M returned to normal, 3.5 & 3.0W accordingly. I rewound L403 on the original T37-6 toroid. I will test today to

Sent an email with a couple questions, thanks!

I recently purchased and received this kit in February. It includes the case and internal GPS module with antenna. I have several kits to complete, and it is larger than I need, so this one is surplus

Hi all, My QMX is COM 7 on the win 11 PC and I have set WSJTX accordingly. Also on COM 7 is the logging program which genreates a conflict as apparently they are unable to share that com port.? WSJTX

Hi GL and Group, Today I tried the QMX in a regular QSO I have weekly.? There seems to be fairly loud "noise", something like impulse noise I'd call it.? My QSO partner said it was something like

Hans, The CW decoder / messaging system has a minor mistake still.? The dictionary used translates the <VE> prosign as? "!"??? ...-. displays "!"? when it should display "VE".? Using a "!" in

Bill, yes the parts are still available. Contact me directly at kthreebo@... Thanks Barry K3BO

Hans, On 003 (20m to 10M QMX), 12m and 10m in DIGI mode seem to have reduced output when using wsjtx.? I unfortunately did not check this on Beta 001 or 002, but it is a noticeable difference from

Hans, I have been having a similar issues on 20m. (20M to 10M QMX). When first running calibration, I used "R" run mode to do everything via the console.? On both 20m and 11m the Phase Error vs DAC