QMX+, updated to 1_01_003 without any problem. Calibrated without a problem. Already couple SSB contact made.
?
The issue I observed is when you transmit and want to play with equalizer settings at the same time, the QMX+ menu freezes from time to time, especially if you want to make significant change (more than one step, eg. change from +3 to -6 with single fast encoder turn). It unlocks afer a while or after release and press PTT again. Back to RX after PTT release is also delayed then, sometimes stuck on TX. Tested with dummy load. No difference if you are talking to the mic or not, I would assume this is not RF-in-the-shack topic.
?
Functional comment for Equalizer settings: when you go to the max setting (+20) it should stop increasing and not turn over to -20. Same may apply for other settings where 0 is in the middle.
?
73
Pawe? SO8FM
