开云体育

When I think about it, it should be much easier to "preprocess" input audio into I and Q paths by CPU/DSP and then use a relatively simple hardware mixer + envelope modulator of the PA. Or, even

It's there. You have to search for QMX+.

Hello, Mark, as soon as the audio input to QMX is interrupted (= no longer detected by the CPU), it falls back into RX mode (fw version 1.0.0.18). Probably a bug. In your case I would guess that the

The talks will eventually show up on the YouTube page for QRPARCI. Last year it took them a couple of months to post them.Perhaps it will be quicker this year. <muhsin.dogrular@...>

Hi Doug H and all. I’m not all that surprised that Hans released an all band version. It is yet another reasonable and logical step along the path to an all band all mode transceiver that many lust

I was able to order one today without a problem. John B. Hayes

Last year when Hans released the QMX, he brought about 500 of them to Hamvention. I believe they all included the enclosure. About 400 of them were sold at FDIM and Hamvention; he handed off the rest

Only Captain Beefheart and *His* Magic Band here ;-) https://www.youtube.com/watch?v=WclKiQBU3rY https://www.youtube.com/watch?v=GXQww4IV97g As for 6m on the new rig, that will open up some

I had to go to the "kits" page to find it. It is not on the QRP shops home. http://shop.qrp-labs.com/

I am super psyched! The first radio I ever built was a QCX+ and now I get to build in that same size. I was lucky enough to read the first message from Todd and saw it in the Shop just minutes after

Wow! I'm slowly working on a project for remote operation of? FT8/FT4 and WSPR 160-10 or even 6m coverage with 3-4 QDXs and a TRX selector/combiner....This does all that in one box. With the

Hi all, just having supper across from FDIM. Vendor night starts in under 3 hours. I hope to buy one and put it in my backpack!! 73, Roger VA1RST

http://shop.qrp-labs.com/qmxp 73 Hans G0UPL http://qrp-labs.com https://buymeacoffee.com/g0upl [email protected]> wrote:

Yes the PWB has the Rev silkscreened on it. joey KF6VVQ

Right there in the home page - top of the list of current projects on the left hand side and also there if you enter the shop.

I don't see the QMX+ anywhere on the QRP labs shop.... or I would have ordered one...

It was recorded. I hope you'll be able to watch it on https://www.youtube.com/@fdimarchives5198/videos 73 DE muhsin TA1MHS

Hi Jim I use 5% tolerance NP0 by Vishay (or sometimes TDK) and 50V rated. I'm back home next Wednesday from the Dayton FDIM/Hamvention trip. 73 Hans G0UPL http://qrp-labs.com

Hi Jim, you loose your bet. But are you really doing non-ham stuff? Unbelievable! ;-) Congratulations, you made a huge step forward. As a reward for the hard work you may enjoy receiving a little bit.

Imagine deciding to start name calling on the internet and your target of choice is Doug Hendricks and in a QRP forum. What a time to be alive.