开云体育

Perhaps this has been discussed but my searching doesn't answer this puzzle. I created a new, empty database and imported a "DXCC_QSLs" adif from LOTW to it. A typical entry from that file looks like this: <CALL:8>P5/4L4FN <QSO_DATE:8>20011204 <APP_LoTW_MODEGROUP:5:S>PHONE <APP_LoTW_MODE:5:S>PHONE <BAND:3>20M <DXCC:3>344 <COUNTRY:18>DPRK (NORTH KOREA) <APP_LOTW_DELETED_ENTITY:2>No <CREDIT_GRANTED:24>DXCC,DXCC_MODE,DXCC_BAND <APP_LoTW_CREDIT_GRANTED:61:S>DXCC-M,DXCC-M-HR,DXCC-PH,DXCC-PH-HR,DXCC-20,DXCC-CHAL,DXCC-5B <APP_LoTW_DXCC_APPLICATION_NR:5:S>00003 <APP_LoTW_DXCC_PROCESSED_DTG:19:S>2009-04-19 17:07:00 <eor> If I look at the resulting log, the only mode that shows up is CW. Selecting "Awards", only no mode and no band or CW give me correct totals. I'm mystified. I will confess, I have not tried to use ACL for anything but logging contacts and exporting to another program for awards tracking, QSL printing, etc, but this is messy and I would like to settle on one program.

I paid up as of yesterday evening. I only made it through about 10 days of the trial. I just found it to be the only piece of software out there for Windows 11 that makes any sense and the CAT control isn't as difficult as programming a Unix box. I probably tried six or seven softwares and at least two were installed and I never even logged anything because they were literally that atrocious. Thanks for making some easy software that makes common sense. -- B. Wilson Hines AA5AZ Neuse River Amateur Radio Association

Hello everyone! For digital modes, I've gotten a good integration setup between FLRig, WSJT-X, Gridtracker, and ACLog - WSJT-X talks to FLRig for rig control, feeds data over to GridTracker, which triggers logging of contacts in ACLog. However, I would like to also utilize FLRig for Rig Control for non-digital uses as well - so I'd like to see if anyone has built a tool that can act as a go-between from the FLRig XML-RPC server, and the ACLog API. If there's not already something available, I might see if I can come up with something, as I do have some programming knowledge - but I don't want to re-invent the wheel if there's already something out there. Thanks in advance! Jeremy, NQ0M

I am using Fldigi with N3FJP log. When I start a QSO in Fldigi, it sends the call sign to N3FLP log and does a lookup completely as expected. The call sign address is in the comments field. When the QSO finishes and Fldigi tells it to log the call, all the information goes to N3FJP log except the address that was in the comment field from the earlier lookup is cleared out and the comments field is blank. I have read and searched and not been successful in finding how to keep that address without doing a secondary address lookup in N3FJP log which means turning off the QRZ open image and bio and then turning it back on after. Is there a check box, or setting I missed? Appreciate any suggestions as to where to look. 73 Bill w1wrh

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download all three files. When done, you can re-start your logging program. Manual installation instructions are here: https://www.country-files.com/n3fjp-info/ Here are the release notes: https://www.country-files.com/n3fjp-02-may-2025/ N3FJP Country Files - 2 May 2025 Version entity is Madeira Is., CT3 Added Prefixes/Callsigns: * RM80RP, R8FF/P and R1CF/M are all European Russia, UA in CQ Zone 16, ITU Zone 29 * RZ9SZ/M and RK3AW/M are both European Russia, UA in CQ Zone 16, ITU Zone 30 * R0AK/M is Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 * R9HAF/M is Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 31 Removed Prefixes/Callsigns: * RK3AW/M, R8FF/P and R1CF/M in European Russia, UA in CQ Zone 16, ITU Zone 29 * RZ9SZ/M in Asiatic Russia, UA9 in CQ Zone 16, ITU Zone 30 * R9HAF/M in Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 31 If you have any questions, send E-mail to Jim Reisert AD1C (at the address below) or make a post to the N3FJP software users reflector. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

I have ACL 6.5 and want to upgrade. I know almost nothing about software. Is the process a simple download. How do I get the current info/log on to the new download. I'm an old ham, 84, still active daily. Can someone answer please. Gary W0CKI since 1954.

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download all three files. When done, you can re-start your logging program. Manual installation instructions are here: https://www.country-files.com/n3fjp-info/ Here are the release notes: https://www.country-files.com/n3fjp-29-april-2025/ N3FJP Country Files - 29 April 2025 Version entity is Western Sahara, S0 Added Prefixes/Callsigns: * MM/OE8TIR is Shetland Is., GM * N4NVG, KL7SH and KL0MT are all USA, K in CQ Zone 4, ITU Zone 7 * NP4KM is USA, K in CQ Zone 5, ITU Zone 8 * KC7DRF is Alaska, KL7 * 4U0IARU and 4U0R are both Vienna Intl Ctr, OE * RP80RK, RP80PT, RP80PL, RP80NK, RP80MU, RP80FAW, RP80AU and RP80A are all European Russia, UA in CQ Zone 16, ITU Zone 19 * RM1O/M is European Russia, UA in CQ Zone 16, ITU Zone 29 * RP80ZS, RP80IZ, RP80I, RP80GDN and RP80FP are all European Russia, UA in CQ Zone 16, ITU Zone 30 * RP80X is European Russia, UA in CQ Zone 17, ITU Zone 20 * RQ9F/M, RP80PM, RP80LSV and R130PM are all European Russia, UA in CQ Zone 17, ITU Zone 30 * RP80VPO and RP80BF are both Kaliningrad, UA2 * RP80UF, RP80INF, RP80GR and RP80DD are all Asiatic Russia, UA9 in CQ Zone 16, ITU Zone 30 * RP80ZAM, RP80STD, RP80J and RP80ANW are all Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 20 * RP80YT, RP80UR, RP80U, RP80TVM, RP80TT, RP80TKP, RP80TG, RP80SUF, RP80SAS, RP80RS, RP80RGA, RP80PEO, RP80P, RP80OTD, RP80NIK, RP80MMK, RP80LP, RP80KN, RP80GK, RP80GAN, RP80DT, RP80CWD, RP80AZ and R130RP are all Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 * RP80UK, RP80TOF, RP80SDD, RP80RF, RP80NT, RP80MP, RP80KM, RP80GSD and R9HAF/M are all Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 31 * RP80PSH, RP80KR, RP80GPF, RP80AEG and RP80AB are all Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 32 * RP80DWK and RP80AV are both Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 33 * RP80V, RP80SD, RP80H and RP80DG are all Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 34 * VK80MAN is Australia, VK in CQ Zone 30, ITU Zone 59 Removed Prefixes/Callsigns: * K9OM in USA, K in CQ Zone 5, ITU Zone 8 * KU4OY in Hawaii, KH6 * 4U0R in Vienna Intl Ctr, OE * RM1O/M in European Russia, UA in CQ Zone 16, ITU Zone 19 * RQ9F/M in Asiatic Russia, UA9 in CQ Zone 17, ITU Zone 30 * R9HAF/M in Asiatic Russia, UA9 in CQ Zone 18, ITU Zone 32 If you have any questions, send E-mail to Jim Reisert AD1C (at the address below) or make a post to the N3FJP software users reflector. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

I use N3FJP AC Log for my own logs and for our Scout Camp Club (K4TBS). We have an event coming up and want to use AC Log because of seamless integration into WSTJ-X, Fldigi, etc., but I've run into an issue. If I'm not very careful, credentials for my personal get used on the club call or vice versa. Because of this, I've turned off auto upload features in LOTW/QRZ. I have AC Log set to prompt setup when starting, but it does not seem to save these based on the log file being used. It seems to be based on the last settings. The club has it's own LOTW account and it's own QRZ log. The credentials for uploading to QRZ/LOTW do not seem to be saved based on the log file being used and if I'm not very careful, I could accidentally upload my personal to the club or vice versa. Deleting these would be a nightmare (especially from LOTW). Does anyone else similarly manage personal log and a club log with AC Log? How do you manage this? Manually? Is there a script I can setup to do all this for me either before or after launch of AC Log? Or do you just not try to do this and use another logger to do your club? K4ZX

In the ACLog DX Spotting tool, I occasionally see "CCC >" This morning, I saw "KN2D de VE7CC-1 29-Apr-2025 1251Z CCC >" What does that mean? Thanks and 73, Ken KN2D

When doing downloads from eqsl if there is an entry which is downloaded that is a missmatch or no match to the log then you are given the option of creating this in the log. I really don't like doing this as a lot of the time the entry is not one I want in my log. (I have had several where I was not even on the air that day and some other missmatches) But if you ignore then then all you get is a notice that there was some missmatches. Is there a way to get an exception list that you can then look at and deal with in a cleaner and more logical manner?

N1MM+ has a feature that works as such: While hunting and pouncing, you either work a station or unsuccessfully try to work a station (N3FJP for example) on a specific frequency (7.210 for example). When you scroll up and down the band with the VFO, N1MM+ remembers that N3FJP is on 7.210. When you land back on 7.210, the software lets you know that more than likely, N3FJP is the station you're hearing. You can then click on the callsign and it puts it into the callsign field, but of course doesn't log it. Is there a N3FJP feature for this in any of the logs? -- B. Wilson Hines AA5AZ Neuse River Amateur Radio Association

I am very close to ordering a New Windows 11 Hardware / Software. Not happy, but based on some other Software I run on my Windows 10 machine from a Financial Perspective. Everyone seems to be saying... We will stop supporting you when Microsoft does. Yea it will work, but limited functionality. Oh I hate this... I am currently on Windows 10. I am starting to do some Prep work now for ACLOG. I am on the current version of ACLOG, so I went ahead and downloaded the latest installer. I have all my Key's ready. I have a Full Export of my Log to ADIF and will continue to have a current copy. My plan is to move my current Primary Machine next to me, and then Install the New Hardware. Then start re-installing everything. My question is, I had done some Customizations adding a POTA Field to my Main Screen, and I am sure there are others I can't remember. So is there a File in ACLOG from my current Primary Machine, that I can restore to the "New Install" of ACLOG that will put those changes back, then I just do the Restore of my ADIF Data? I am keeping the Same Monitors, Keyboards, etc... So it would be great for something like this. Thanks, Keith, K4KAL

In future planning for updates is it possible to include 2m 70cm to the world map view for logged QSO's? I have a log dedicated to satellite with the 9700 and would like to see that data. Thanks WV8T

My “Spot Last” button doesn’t seem to be working. I tried to ask Juliet but didn’t have much luck. Any suggestions? Regards, Pat – KZ5J

I am working on another computer I set up. I am not seeing the prefix,cont,bearing,nor LOTW status,time,nor LOTW status. Any help would be appreciated. Thanks 73's Dave NU4N