开云体育

Well here we are Saturday nite of DX and I just noticed my frequency readout is incorrect. On 40 rig is at 7.055.770 and RI shows 0.70558 on Yaesu DX 10 All settings a what has been shown except using the Yaesu Newer instead of Yaesu Newer-2. The Newer-2 pulls up nothing. Where did I screw up? TIA Dale, K8TS

I have been using RemoteHams for quote sometime and when logging directly the LOTW im able to specificy the correct RemoteHams Grid im using to correctly note in the log the Remote CO station grid im using... I cant seem to log locally to my N3FJP log using that grid config that i have setup in WSJTX or GT .. it still logs my contact info for my QTH. For example if im using an RemoteHams station in FL (EL96) and log a contact when it logs to my grid info instead of putting EL96 it will use my QTH of CN87wi .. is there a configuration im missing? I have a PC that i only use for Remote Hams and typically only use EL96 remote, so if its a static config change i can make that's fine but it would be great to be able to grab that Grid info from GridTracker or WSJTX

VA QSO Party Contest bonus stations for 2025 are: ? Six SPARC stations will be bonus stations worth 50 points. Subsequent QSOs with the same station are worth 0 bonus points. Bonus stations are: AJ4LN, KK4AIA, KM4SK, NQ4K, W4KSN, and W8ANT. The 2025 Virginia QSO Party will be held during the weekend of 15-16 March 2025. Saturday, 15 March, 1400 UTC - Sunday, 16 March, 0400 UTC and Sunday, 16 March, 1200 UTC - 2400 UTC. https://www.qsl.net/sterling/VA_QSO_Party/2025_VQP/2025_VQP_Main.html - Eric, AJ4LN

There are new country files for ACLog and related software by N3FJP. To update the country files from the logging program menu, select: Files -> Download Country Files From AD1C You should download all three files. When done, you can re-start your logging program. Manual installation instructions are here: https://www.country-files.com/n3fjp-info/ Here are the release notes: https://www.country-files.com/n3fjp-13-february-2025/ N3FJP Country Files - 13 February 2025 Version entity is Crete, SV9 Added Prefixes/Callsigns: * KC4/KB1IFZ and KC4/KB1EHE are both Antarctica, CE9 in CQ Zone 13, ITU Zone 74 * VK0/FT4YM/P is Antarctica, CE9 in CQ Zone 29, ITU Zone 70 * EA8AAH and AM64KZ are both Spain, EA * TO1P is Saint Barthelemy, FJ * FO/F6BCW is Marquesas Is., FO/M * GM0FRT is Shetland Is., GM * GB4CDG is Scotland, GM/t * IR0APTT is Sardinia, IS0 * WV0T, WH6GHG, WC2A, WA9BTV, W9NC, W3NX, W3LS, W1PAA, W0SX, NE1LA, N9OHW, KL7JB, KD4STN, K5XI and K1RS are all USA, K in CQ Zone 3, ITU Zone 6 * K7KMM is USA, K in CQ Zone 3, ITU Zone 7 * K7KTM is USA, K in CQ Zone 4, ITU Zone 6 * WW8L, WB9PRG, N9CNF, N7RI, KS9A, KD9OFG, KD6AF, KC9LBO, KC9DGP, KC3OL, AI7PM and AD7CL are all USA, K in CQ Zone 4, ITU Zone 7 * WE5E, WD4NYL, WA4VXW, WA4USA, W4SHL, W4KD, W4GHD, W3WCT, W3HDH, NK3V, N4TLM, N4SB, KO5S, KN4DUA, KM4ECH, KC4NX, KA5NDH, K4BWP, K2OO, K0BBQ and AI5FK are all USA, K in CQ Zone 4, ITU Zone 8 * WV8HAT, WB9DBD, WB6BEE, W8TMT, W8CMK, N8VU, KL7Y, KL4ZJ and KF6HDJ are all USA, K in CQ Zone 5, ITU Zone 8 * KJ6FIP is Hawaii, KH6 * RO2E/M, R9YDX/6 and R1CF/M are all European Russia, UA in CQ Zone 16, ITU Zone 29 * R8AIM/0 is Asiatic Russia, UA9 in CQ Zone 19, ITU Zone 30 Removed Prefixes/Callsigns: * W0PE, NR5NN, N1CC, KD9Z, K2AK, K0JJ and AJ0SE in USA, K in CQ Zone 3, ITU Zone 6 * N7MSI, N7CMJ, N1NYT and KR7Q in USA, K in CQ Zone 4, ITU Zone 6 * WI6T, WD9FJL, W9BED, N9SXF, KI6HQT, KF9MT, KC9CSQ, KB9DAK, KA4RUR, K9VD, K9KSU, K6DJ, K3LKS, AI7C and AA7TJ in USA, K in CQ Zone 4, ITU Zone 7 * WB4DKQ, WA4CDP, NN4H, N4ML, N4JKD, N3AWS, KZ4HS, KW4OV, KN4CNU, KE4QCY, K5UF, K3DMG, AG5AT and AE4M in USA, K in CQ Zone 4, ITU Zone 8 * W8RD, W8NUD, NX7U, N7RCS, N0VFJ and AJ6TE in USA, K in CQ Zone 5, ITU Zone 8 * RO2E/M and R1CF/M in European Russia, UA in CQ Zone 16, ITU Zone 29 * KC4/KB1IFZ and KC4/KB1EHE in South Shetland Is., VP8/H If you have any questions, send E-mail to Jim Reisert AD1C (at the address below) or make a post to the N3FJP software users reflector. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us

AClog displays WSJTX FT8 contact information in realtime as each FT8 QSO is logged, which is a real convenience. However, unlike QSOs that are logged directly into ACLog, ACLog does not look up information about the call sign (from QRZ in my case). Is there some setting I can change to make this happen? Thank you. -- Jim Webb, W4NTA

This message, sent almost a year ago, never showed up in this group message board. So here I go I'll try again. I hope to get a response. 73 Eric K4FAN Yahoo Mail - Email Simplified ----- Forwarded Message ----- From: "Eric Webner" <ka8fan@...> To: "[email protected]" <[email protected]> Cc: Sent: Sun, Mar 24, 2024 at 22:10 Subject: Changing CW Speed Hello Scott and Family, When working stations using CW, it is very convenient to send "canned" messages using the F keys. I have set up some messages to send using the menu Transmit Settings/CW, which also has speed settings. Often, there are times when I come across a station that is sending at a faster or slower speed. Is there a quick, convenient way to change the speed without going into the menu? 73, Eric K4FAN ex KA8FAN

Thanks to Scott's masterpieces I used TWO of his programs to do CW,SSB,FT8 with ACL and the WPX program for the RTTY contest EASILY with no pen/pencil! In a POTA park so all Q's counted for POTA. Hats off to the fldigi & wsjtx folks as well. Hint: the ADIF master program is great for log tweaking. One minor bug in the WPX program, You can't selectively export records like in the other programs. No biggie, I figured it out. -- 73, Bo W4GHV since '54 https://www.qrz.com/db/W4GHV

Hi Scott, I was thinking how much I love the watch list feature and it would be great if there was a way to say automatically load all the stations mentioned in the ARRL Dx bulletin or one of the other DX bulletins into the watch list. Thanks for a great program! Steve W6QX

I have run into a problem with my backup of ACLOG. I have it set now that every time I close the program I have it backed up to a SD card. I was using a flash drive but that didn't seem to work. My problem is that when I turn on my computer the .mdb file is corrupt. So I have to go back 1 day and load from there which means all qso's from the previous day are not there. I am a avid POTA chaser and I keep a hand written copy of all the qso's I made the day before. Any thoughts would be appreciated. Thanks -- 73's Dave NU4N

I tried to get both N3FJP, WSJT-X and JTAlert to run at the same time. But evidently that is not possible. Evidently N3FJP uses the Main Server Setting that is in WSJT. It will not identify the secondary server if activated. Also, JTAlert will not work if one uses the Secondary Server. So I either give up automatic logging from WSJT into N3FJP or Forget JTAlert and use N3FJP and automatic logging from WSJT. Perhaps a programming change could be done with N3FJP to allow the use of a secondary Server #. Is that a possibility Scott? Mark KB3Z

Hi All, CQ WPX RTTY is this weekend and runs 0000 UTC Saturday to 2359 UTC Sunday! CQ WPX is really cool! Everyone can work everyone for points and multipliers, so you don't need a robust DX station to make a lot of Qs. In addition to DX, there will be plenty of stateside stations to work too! The exchange is just 599 and a progressive serial number. Multipliers are simply prefixes. For example, W3, N3, NE3, WC3, K3, KA3, KB3, etc. are each separate prefixes that each count as multipliers. You'll find the complete rules here: https://www.cqwpxrtty.com/rules.htm And the logging software for this contest (which takes care of the serial numbers for you automatically) here: https://www.n3fjp.com/cqwpx.html Several free digital programs that interface with our software are here: https://www.n3fjp.com/faq.html#q50 If you need sample macros for your digital software, this will get you going: http://www.nemarc.org/macros.html Please install and connect your digital software to our CQ WPX software early this week as detailed here: https://www.n3fjp.com/help/digitalsetup.html Getting the software set up is easy and we are happy to help before the contest starts, but once we are in contest mode, the support hat comes off!!! Lord willing, I am hoping to bring a good effort for this one and work you on RTTY this weekend! Enjoy!!! 73, Scott N3FJP http://www.n3fjp.com 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give the reason for the hope that you have. But do this with gentleness and respect...

Hi All, Where can Ifind the previous version 7.0.9 of contact log to download? thanks, Dick, W1ZC

Hello Scott, Using aclog with two radios, when I switch rigs and open aclog again it freezes. Have to go alt control delete to get it off with task manager. Reopen aclog and works fb... Been doing this for long time. It does this when I switch rigs. Have setup in radio confs also. Any suggestions? Don...w2xb

Yes! I was just getting ready to inform you of that. Good job. you found it. Loui WA5LOU

I just came across this challenge. https://stateqsoparty.com/ This weekend there are 3 QSO parties and if I search and pounce do I have to change between Software every time I hear someone on a different QSO party. How do you log for multiple parties? Will Shattuck -- Will KN6TZK