开云体育

Charlie I’ll get you on the repeater and walk you through it. 73 Dave wo2x Sent from my waxed string and tin cans.

Hi Charlie, Thanks for your follow up.? If you already logged the QSOs with the correct grid square, there is no need to edit the QSO records in AC Log.?? That message is being returned from ARRL's

Hi Scott, thanks for the reply. I do not understand how this happens in the first place. Every time I upload. I always select the location I am operating from and I upload after each operating

Hi Charlie, Thanks for your e-mail.? Create a station location in TQSL with the proper grid square and be sure to select it when uploading the associated QSOs for that location. Enjoy! 73,

I just click ignore. it is trying to upload a second time, before aclog does not mark as sent the first time, until lotw confirm receipt. if time passes, I would do a download first, so maybe the N

Hello Everyone, I use N3FJP ACLog on my home computer in the shack. When operating portable, I use either PoloLog or HAMRS, then export the ADIF into ACLog. However, even before using these portable

Hello Will, when starting the program you cannot call up any function and after a short time the error (No feedback) appears in German at the top of the menu bar. (See picture) The logbook is then

What is the exact wording of the error message? -- Will KN6TZK

Thanks Scott and others for the input. Understanding now where this comes from in the sequence of things I understand. I combed through the log and found several Q's which had been uploaded to LOTW

Hi Dave, Thanks for getting back. I can log into the site using the same username and password as listed in ACLog and my eQSL subscription is up-to-date. I can upload QSOs without any

Hello Dave, no, the program and the logbook data are on my D: drive. Am 29.03.2025 um 21:30 schrieb Dave Garber via groups.io:

are you storing your log on onedrive, or another cloud service... ? Dave Garber VE3WEJ / VE3IE [email protected]> wrote:

this was about eqsl, i think I saw, not lotw, but I will ask, can you go to the eqsl website and log in successfully, using the same user name and password? did you check if there was a expiry

Hello Larry, thanks for the quick reply! I am a paying member of QRZ.COM and the upload and download works without any problems. I deactivated the menu in the program and then restarted the logbook.

Whenever I try to download eQSL contacts, after uploading, I get the following: Unable to find the 'Your ADIF log file has been built' tag. Please be sure your user name and password are

Hi Joerg, Thanks for your follow up.? I'm sorry you are still having trouble.? In addition to Larry's suggestion, also try setting rig interface to None.? If that doesn't correct the problem, try

Are you trying to download from QRZ as well?? If so, check that your account is active and up-to-date. Larry / W1DYJ

Hello Scott, thanks for the quick answer to my question. I have switched on the DX Cluster completely and restarted the program. Unfortunately, nothing has changed. The program starts, but brings this

Hi?Joerg, Thanks for your e-mail.? Click Settings > DX Spotting and disable the function to see if it corrects the problem.? If it does, select a different telnet host or correct your settings for

When I start the program, I first get the message at the top for a while (no response). Only after a certain time does the program start normally and then reload the logbook. Before that, no function