Oh, yes...I see you did, sorry 'bout that Mitch!!
I had installed AClog on another (very cheap) laptop, and it
worked ok.
So, I was preoccupied with A-B comparing the two to find out what
the heck was the difference!
When checking the "auto-upload" to QSL thing checkbox, there
should be a pop-up indicating it may
impact TSM operation.
- Does your ACLog database reside on your PC or in the
Cloud?
- Do you have the setting enabled to upload to LOTW after each
logged QSO?
Tnx agn, 73!
Dave? KD2E
73, Mitch
On 7/16/23 7:15 PM, Mitch NW0M via
groups.io wrote:
toggle quoted message
Show quoted text
On Sun, Jul 16, 2023 at 03:45 PM, Dave Edwards wrote:
The problem was the auto upload to
LoTW. !!
That's what I asked you five days ago!!!? Glad you got it
working...
73, Mitch
|
Hi Don,
Thanks for your e-mail.? The data is retrieved from any callbook lookups you may have configured, not the previous record.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 16, 2023 at 08:12:56 PM EDT, Don W7WLL <w7wll@...> wrote:
Need some guidance.
Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter second LH number. The recalled line did NOT show County or Grid (which I'd deleted).
But, when I entered the second LH number boththe old County and Grid popped back up and I had to go through the delete process again.
Apparently if a new data record is entered it automatically pulls the deleted information back up.
Is this normal or am i missing something?
Don W7WLL
|
Need some guidance.
Entering a call who was 'activating' two lighthouses (differing names and numbers). Entered first and deleted County and Grid because they were wrong. Ckiked on Recall to enter second LH number. The recalled line did NOT show County or Grid (which I'd deleted).
But, when I entered the second LH number boththe old County and Grid popped back up and I had to go through the delete process again.
Apparently if a new data record is entered it automatically pulls the deleted information back up.
Is this normal or am i missing something?
Don W7WLL
|
On Sun, Jul 16, 2023 at 03:45 PM, Dave Edwards wrote:
The problem was the auto upload to LoTW. !!
That's what I asked you five days ago!!!? Glad you got it working... 73, Mitch
|
Re: .mdb to .adif Converter
You should use the export tool under the file drop down. Export creates an adif file
73
toggle quoted message
Show quoted text
On Jul 16, 2023, at 18:12, Patrick Dickey <patrick.c.dickey@...> wrote:
? If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for the interaction. Then, you create a scheduled task to run the script (or just run the program with the arguments passed). ? Have a great day. ?
Patrick. ? ? I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping there is such a tool out here.? I have found a couple but they require interaction.
|
Re: .mdb to .adif Converter
If they are open source, you might be able to create a script (batch file since it’s Windows) that provides the interaction. Or tweak their main methods to include parameters that you pass in for the interaction. Then, you create a scheduled task to run the script (or just run the program with the arguments passed). ? Have a great day. ?
Patrick. ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of ckmcdonald Sent: Sunday, July 16, 2023 11:29 AM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] .mdb to .adif Converter ? I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping there is such a tool out here.? I have found a couple but they require interaction.
|
The problem was the auto upload to LoTW. !!
Turned that off, and problem solved!
Switched my active log from Onedrive to my local C drive, and
that seems to have helped a bit more.
Thanks to everyone for the help!
Best 73!
Dave KD2E
On 7/16/23 3:07 PM, Kevin Gray wrote:
toggle quoted message
Show quoted text
Dave
It could be internet latency.
Is your log on a local drive, or is it in
the cloud ?? (Onedrive, Google drive, etc)
Are you set to “Real time upload” to any
of the eLog ?? (eQSL, LoTW, QRZ Logbook)
?
Any of these could be the cause
?
Putting your log on a local drive, and
temporarily turn off all lookup (QRZ) or eLog upload features,
could quickly determine if these are contributing to you
issue.
?
?
Kevin
N9VPV
-. ----. …- .--. …-
?
?
?
?
Scott....On the TSM delay I mentioned earlier, is it possible
the error indication below might help?
It seems when it it trying to write the new contact to the
logbook AND send the F3 contents at the same time, it seems to
have an issue doing too much???? (below)
(The problem is in TSM mode, the tab sends F2 contents just
fine, but enter does not send F3 contents until about 5
seconds after hitting enter.? F3 alone works fine)
....Dave
?
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
Thanks
for your e-mail.? I'm sorry that you are still
having trouble.? I've already replied to your
thread here:
I
don't currently have any additional insights
to add, but I will continue to try and
duplicate what you are experiencing.
开云体育
the Amateur Radio community with
contesting and general logging software
since 1997.
1
Peter 3 vs 15: Always be prepared to
give an answer to everyone who asks you
to give .
But do this with gentleness and respect...
On
Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...>
wrote:
Can
you suggest what to look at for this scenario?
I
have an Icom 7610, and all is working, but...
When
sending CW from messages in F registers using
TSM,
The
tab correctly sends the contents of F2, but
the
return sends the contents of F3 after about a 3
second delay.
It
all works, except for the delay.? The computer
is pretty fast and
don't
think its a matter of a slow cpu.? Hitting F3
sends the contents
|
for some reason my adi file does not have name sent in any contact. is there an easy way to? correct this
Mel
NE9A
|
Dave It could be internet latency. Is your log on a local drive, or is it in the cloud ?? (Onedrive, Google drive, etc) Are you set to “Real time upload” to any of the eLog ?? (eQSL, LoTW, QRZ Logbook) ? Any of these could be the cause ? Putting your log on a local drive, and temporarily turn off all lookup (QRZ) or eLog upload features, could quickly determine if these are contributing to you issue. ? ? Kevin N9VPV -. ----. …- .--. …- ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Dave Edwards Sent: Sunday, July 16, 2023 11:40 AM To: [email protected]Subject: Re: [N3FJPSoftwareUsers] TSM delay ? Scott....On the TSM delay I mentioned earlier, is it possible the error indication below might help? It seems when it it trying to write the new contact to the logbook AND send the F3 contents at the same time, it seems to have an issue doing too much???? (below) (The problem is in TSM mode, the tab sends F2 contents just fine, but enter does not send F3 contents until about 5 seconds after hitting enter.? F3 alone works fine) ....Dave ? On 7/11/23 7:58 AM, Scott Davis via groups.io wrote: Thanks for your e-mail.? I'm sorry that you are still having trouble.? I've already replied to your thread here: I don't currently have any additional insights to add, but I will continue to try and duplicate what you are experiencing. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave Edwards <kd2e@...> wrote: Can you suggest what to look at for this scenario? I have an Icom 7610, and all is working, but... When sending CW from messages in F registers using TSM, The tab correctly sends the contents of F2, but the return sends the contents of F3 after about a 3 second delay. It all works, except for the delay.? The computer is pretty fast and don't think its a matter of a slow cpu.? Hitting F3 sends the contents
|
Hi Dave,
Thanks for your follow up.? With TSM<, the CW sending occurs after saving the log entry.? If for some reason you have a delay on your system before the entry is written to your log file, that would account for the time period between pressing enter and the CW sending to start.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Sunday, July 16, 2023 at 12:40:52 PM EDT, Dave Edwards <kd2e@...> wrote:
Scott....On the TSM delay I mentioned earlier, is it possible the
error indication below might help?
It seems when it it trying to write the new contact to the
logbook AND send the F3 contents at the same time, it seems to
have an issue doing too much???? (below)
(The problem is in TSM mode, the tab sends F2 contents just fine,
but enter does not send F3 contents until about 5 seconds after
hitting enter.? F3 alone works fine)
....Dave
?
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
Hi Dave,
Thanks for your e-mail.? I'm sorry that
you are still having trouble.? I've already replied to
your thread here:
I don't currently have any additional
insights to add, but I will continue to try and
duplicate what you are experiencing.
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with
contesting and general logging software since
1997.
1 Peter 3 vs 15: Always be
prepared to give an answer to everyone who
asks you to give . But do this with gentleness
and respect...
On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...> wrote:
Hi Scott....
Can you suggest what to look at for this
scenario?
I have an Icom 7610, and all is working,
but...
When sending CW from messages in F
registers using TSM,
The tab correctly sends the contents of F2,
but
the return sends the contents of F3 after
about a 3 second delay.
It all works, except for the delay.? The
computer is pretty fast and
recent, so I
don't think its a matter of a slow cpu.?
Hitting F3 sends the contents
immediately.
Thanks for any thoughts.
....Dave
|
Dave, ? That probably would be the problem. Have you tried to change the file location from One Drive to your local hard drive? It is slow to log the contact to One Drive. ? Tom K5TEE ? ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of Dave Edwards
Sent: Sunday, July 16, 2023 10:40 AM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] TSM delay? Scott....On the TSM delay I mentioned earlier, is it possible the error indication below might help? It seems when it it trying to write the new contact to the logbook AND send the F3 contents at the same time, it seems to have an issue doing too much???? (below) (The problem is in TSM mode, the tab sends F2 contents just fine, but enter does not send F3 contents until about 5 seconds after hitting enter.? F3 alone works fine) ....Dave ? On 7/11/23 7:58 AM, Scott Davis via groups.io wrote: Thanks for your e-mail.? I'm sorry that you are still having trouble.? I've already replied to your thread here: I don't currently have any additional insights to add, but I will continue to try and duplicate what you are experiencing. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave Edwards <kd2e@...> wrote: Can you suggest what to look at for this scenario? I have an Icom 7610, and all is working, but... When sending CW from messages in F registers using TSM, The tab correctly sends the contents of F2, but the return sends the contents of F3 after about a 3 second delay. It all works, except for the delay.? The computer is pretty fast and don't think its a matter of a slow cpu.? Hitting F3 sends the contents
|
Re: 7300 CW key AND rig control
Thanks Steve!? Yes, from all my looking stuff up this morning,
the USB and C-IV is required for the 7300, but only a single USB
for the 7610 and 705.
I think I'm correct on that.
.....Dave
On 7/16/23 12:58 PM, AI3KS wrote:
toggle quoted message
Show quoted text
Dave,
With both the USB and C-IV cable it is possible. If not, you need
a com port splitter which I have never tried.
Hope this helps.
Steve, AI3KS
|
Re: 7300 CW key AND rig control
Dave,
With both the USB and C-IV cable it is possible. If not, you need a com port splitter which I have never tried.
Hope this helps.
Steve, AI3KS
|
Scott....On the TSM delay I mentioned earlier, is it possible the
error indication below might help?
It seems when it it trying to write the new contact to the
logbook AND send the F3 contents at the same time, it seems to
have an issue doing too much???? (below)
(The problem is in TSM mode, the tab sends F2 contents just fine,
but enter does not send F3 contents until about 5 seconds after
hitting enter.? F3 alone works fine)
....Dave
?
On 7/11/23 7:58 AM, Scott Davis via
groups.io wrote:
toggle quoted message
Show quoted text
Hi Dave,
Thanks for your e-mail.? I'm sorry that
you are still having trouble.? I've already replied to
your thread here:
I don't currently have any additional
insights to add, but I will continue to try and
duplicate what you are experiencing.
Enjoy!
73, Scott
N3FJP
开云体育 the Amateur Radio community with
contesting and general logging software since
1997.
1 Peter 3 vs 15: Always be
prepared to give an answer to everyone who
asks you to give . But do this with gentleness
and respect...
On Monday, July 10, 2023 at 05:38:33 PM EDT, Dave
Edwards <kd2e@...> wrote:
Hi Scott....
Can you suggest what to look at for this
scenario?
I have an Icom 7610, and all is working,
but...
When sending CW from messages in F
registers using TSM,
The tab correctly sends the contents of F2,
but
the return sends the contents of F3 after
about a 3 second delay.
It all works, except for the delay.? The
computer is pretty fast and
recent, so I
don't think its a matter of a slow cpu.?
Hitting F3 sends the contents
immediately.
Thanks for any thoughts.
....Dave
|
7300 CW key AND rig control
The Icom IC7610 can do rig control and CW keying at the same time with N3FJP.
I am thinking the Icom IC-7300 CANNOT?
It only installs a single com port driver, whereas the 7610 installs two. So one can be used for rig
control, and the other for CW keying.
Can anyone confirm that this is true?
By the way, I think the newer QRP IC-705 also installs two!!! Nice to know!
....Dave? KD2E
|
Re: .mdb to .adif Converter
I'm trying to automate a process that will run several times a day without user interaction so I need the converter to be non-interactive and able to be run from a Windows command-line.? I'm hoping there is such a tool out here.? I have found a couple but they require interaction.
|
Re: .mdb to .adif Converter
Just do File>Export to ADIF. That should do what you want.
Bobby/N4AU
--
n4au@...
n4au@...
|
Can anyone point me to a reliable conversion tool that will convert an ACLog .mdb database file to an .adif file?
I need one that can be run from the command-line in Windows and doesn't need any user interaction?
|
Re: VHF log recent contact area.
Thank you Scott!!! That worked!!! I have been ignoring this problem for 2 years. Your the best!!! See you.down the log. Kc3ndu
On Sat, Jul 15, 2023 at 6:02 PM, Scott Davis via groups.io <SNKDavis@...> wrote: Hi Keith,
Thanks for your follow up and the screen shot.? That's very helpful.? Click Settings > Reset Columns to Default > Widths.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
On Saturday, July 15, 2023 at 04:21:51 PM EDT, klynn76565@... via groups.io <klynn76565@...> wrote:
No good, tried all of the above On Sat, Jul 15, 2023 at 4:00 PM, Kevin Gray <n9vpv@...> wrote: Try pressing ESC (escape) key to remove the call that is in the "call" field. Do the recent contacts show then ?
With a call sign in the call box, it will only show recent call with that particular station.?
Are your "Font" colors set to default ? White text won't show on a white background ??
Kevin
N9VPV
|
I had a hard drive crash on my Desktop that is hooked to my Kenwood 2000. I write a back file to my USB D drive. Also I do the same for? my ICOM 7300.
I was wondering if I save and adif file on the ICOM 7300. Then load my mdb file from the Kenwood which dated 7/15 before my crash. Should I save a ADIF flle on the ICOM 7300 so I at least don't loose any qso's. Should I start a new file on my ICOM and upload my Kenwood MDB file?
I hope I explained this ok?
Thanks
--
73's Dave NU4N
|
ckmcdonald