Re: Logging Time off in Network mode on AC log
Hi Tom,
Thanks for your e-mail.? Not at this time.? I'm sorry I didn't have the answer that you were hoping for.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I have been calling a net twice a week using AClog, but just discoverer Net mode.? Ran some testing and it would be very useful except that it does not log "time off if blank" like the main screen does.? Is there anyway to make it do so? TOM WA4GIM
|
Hi Brian,
Thanks for your e-mail.? I'm sorry that you ran into trouble.
I'm unable to duplicate what you have there.? How were you able to get your label heights higher than your text box heights (or change them from default at all for that matter)?
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I've designed a custom layout for my POTA days.
The design work was done with display settings at 100% scaling and 1920x1080 resolution. The form was full screen.
The first row of labels and entry fields are fine, but the second row has problems (see screen shot). For lack of a better
description, the entry fields are "squooshed", i.e., too short and so all the text is not visible.
I've tried moving the fields up/down, thinking that they were overlapping with the unshown "comments" entry field
below. Looking at the efl file, there doesn't appear to be a way to set the height of the fields (I can understand
why).
Any suggestions for unsquooshing that second row?
73 and Clear Skies,
Brian D. Warner
WB0NWZ
|
Re: AC Log and WSJT-X with FT-710 and FLRIG
Hi Ken,
Thanks for your e-mail.? You can interface WSJT-X directly with AC Log as detailed here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I've spent some time going through the N3FJPSoftwareUsers threads and can't easily find how to have an FT8 contact that was made using WSJT-X (with a Yaesu FT-710) log automatically in ACLog. ?
Can you help?
?
Thanks in advance and 73,
Ken
KN2D
|
Hi Fred,
Thanks for your e-mail.? Sorry, no, we won't be able to make it to Dayton this year,
Enjoy the event!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Hey Scott and team. ?Are you all going have a booth at the Dayton Hamvention this year?
Would love to stop in and say hello.
?
Fred
|
Steve et al...
Sorry for the late reply.? File->Sort by Date worked.
Thank you
Mark K3MSB
As Mike asked "did you sort by date" or click the date column?
?
File > Sort by date is what you want.
?
Hope this helps.
?
Steve, AI3KS
|
AC Log and WSJT-X with FT-710 and FLRIG
I've spent some time going through the N3FJPSoftwareUsers threads and can't easily find how to have an FT8 contact that was made using WSJT-X (with a Yaesu FT-710) log automatically in ACLog. ?
Can you help?
?
Thanks in advance and 73,
Ken
KN2D
|
Re: Editing previous log entry's Comment field
I don't have any other info on editing that field.
toggle quoted message
Show quoted text
On 2025-05-12 16:33, bhfg123 via groups.io wrote: Thanks, Travis. That worked for previously saved records.
Now, is there a way to enter more info in the Comments field as I am
creating a new log entry?
Rick
On Sun, May 11, 2025 at 7:37?PM KB5ILY - Travis W. Burton via
groups.io [1] <kb5ily@...> wrote:
Try this:
Data you enter after the contact<Ctrl+Enter>
Name and Address filled by ACLog<Ctrl+Enter>
Data that you entered later.
On 2025-05-11 17:45, bhfg123 via groups.io [1] wrote:
I have ACLog set to auto fill the comments field with the contact's
name and address. If I double click a previous entry and select the
'Edit' button to change the entry info, I can change every field
except the Comments. I can add text to the first line of the comment,
but I can't add additional lines to the comment, and as soon as I hit
the enter key the window closes. It behaves pretty much the same if
I try to add more comments on a new entry.
AM I doing something wrong? Or is editing the Comments field no
suppported?
Tnx,
Rick
Links:
------
[1] /g/N3FJPSoftwareUsers/message/64529
[2] /mt/113061836/450341
[3] /g/N3FJPSoftwareUsers/post
[4] /g/N3FJPSoftwareUsers/editsub/450341
[5]
/g/N3FJPSoftwareUsers/leave/10052300/450341/777840477/xyzzy
--
I'm good in the callbook!
47 & 73 de Travis KB5ILY / PG00041468
870-260-6068 (Phone)
--
Travis W. Burton, NP, ESQ., KB5ILY (QCWA #36353) & GROL /
Arkadelphia
AR
President, DeGray Amateur Radio club, Inc.
EC - Clark County AR / Assistant Section Emergency Coord.,
SWAR
SATERN, ARRL Instructor & VE, AREC I, II & III
W5YI Instructor & VE
ARRL Technical Specialist
Internet: mailto:kb5ily@...
WWW:
WWW:
GOD BLESS THE UNITED STATES of AMERICA
Only he who Attempts the Ridiculous can Achieve the Impossible.
(WILL
HENRY)
Linux is my operating system of choice.
Computers are like Air Conditioners,
they stop working correctly when you open windows.
<>< Links:
------
[1]
[2] /g/N3FJPSoftwareUsers/message/64547
[3] /mt/113061836/450341
[4] /g/N3FJPSoftwareUsers/post
[5] /g/N3FJPSoftwareUsers/editsub/450341
[6] /g/N3FJPSoftwareUsers/leave/10052300/450341/777840477/xyzzy
--
I'm good in the callbook!
47 & 73 de Travis KB5ILY / PG00041468
870-260-6068 (Phone)
--
Travis W. Burton, NP, ESQ., KB5ILY (QCWA #36353) & GROL / Arkadelphia AR
President, DeGray Amateur Radio club, Inc.
EC - Clark County AR / Assistant Section Emergency Coord., SWAR
SATERN, ARRL Instructor & VE, AREC I, II & III
W5YI Instructor & VE
ARRL Technical Specialist
Internet: mailto:kb5ily@...
WWW:
WWW:
GOD BLESS THE UNITED STATES of AMERICA
Only he who Attempts the Ridiculous can Achieve the Impossible. (WILL HENRY)
Linux is my operating system of choice.
Computers are like Air Conditioners,
they stop working correctly when you open windows.
<><
|
Hey Scott and team. ?Are you all going have a booth at the Dayton Hamvention this year?
Would love to stop in and say hello.
?
Fred
|
Re: Clicks when using ACLog
Hi All,
Thanks Scott, Mike and Jeff for your inputs.
I can only hear it ansd see it when I press PPT or foot pedal, and do not talk.
Changing the baud rate and or the polling rate has no effect on the "blip".
I tried all combinations of both.
I'm getting the same results with both the Heil iCM and Heil ProSet Plus mics.,
using the PPT or foot pedal.
Changing either the RF power level, mic Gain, or Receive ATT has no effect.
Receive volume does increase the output audio in the headset.
I'm using the same LCU-3-I-USB cable (USB on computer end, .5mm at rig end ) that I used on the IC7600, and I did download the latest software version.?
Using USB Com Port 3 on Win 11 computer, to 3.5mm CI-V Remote jack on IC7610. The same set up I used with the IC7600.
One "good" observation is that it does not show , nor can I hear any "blip" in AM or FM mode, Only on USB and LSB ???
Still baffled and open to suggestions.
Thanks,
Jim? W1WIU
|
Re: Editing previous log entry's Comment field
Thanks, Travis.? That worked for previously saved records.
Now, is there a way to enter more info in the Comments field as I am creating a new log entry?
Rick
On Sun, May 11, 2025 at 7:37?PM KB5ILY - Travis W. Burton via <kb5ily= [email protected]> wrote: Try this:
Data you enter after the contact<Ctrl+Enter>
Name and Address filled by ACLog<Ctrl+Enter>
Data that you entered later.
On 2025-05-11 17:45, bhfg123 via wrote:
> I have ACLog set to auto fill the comments field with the contact's
> name and address.? ?If I double click a previous entry and select the
> 'Edit' button to change the entry info, I can change every field
> except the Comments.? I can add text to the first line of the comment,
> but I can't add additional lines to the comment, and as soon as I hit
> the enter key the window closes.? ?It behaves pretty much the same if
> I try to add more comments on a new entry.
>
> AM I doing something wrong? Or is editing the Comments field no
> suppported?
>
> Tnx,
> Rick
>
>
>
> Links:
> ------
> [1] /g/N3FJPSoftwareUsers/message/64529
> [2] /mt/113061836/450341
> [3] /g/N3FJPSoftwareUsers/post
> [4] /g/N3FJPSoftwareUsers/editsub/450341
> [5]
> /g/N3FJPSoftwareUsers/leave/10052300/450341/777840477/xyzzy
--
I'm good in the callbook!
47 & 73 de Travis KB5ILY / PG00041468
870-260-6068 (Phone)
--
? ?Travis W. Burton, NP, ESQ., KB5ILY (QCWA #36353) & GROL / Arkadelphia
AR
? ? ? ? ? ? ? ? ?President, DeGray Amateur Radio club, Inc.
? ? ? EC - Clark County AR / Assistant Section Emergency Coord., SWAR
? ? ? ? ? ? ? ? SATERN, ARRL Instructor & VE, AREC I, II & III
? ? ? ? ? ? ? ? ? ? ? ? ? ?W5YI Instructor & VE
? ? ? ? ? ? ? ? ? ? ? ? ?ARRL Technical Specialist
? ? ? ? ? ? ? ? ? ? ? ?Internet: mailto:kb5ily@...
? ? ? ? ? ? ? ? ? ? ? ? ? WWW:?
? ? ? ? ? ? ? ? ? ?WWW:?
? ? ? ? ? ? ? ? ? ? GOD BLESS THE UNITED STATES of AMERICA
Only he who Attempts the Ridiculous can Achieve the Impossible. (WILL
HENRY)
? ? ? ? ? ? ? ? ? ? Linux is my operating system of choice.
? ? ? ? ? ? ? ? ? ? Computers are like Air Conditioners,
? ? ? ? ? ? ? they stop working correctly when you open windows.
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? <><
|
Re: Clicks when using ACLog
Perhaps – don’t know.? But mine has been running without fail for over 2 years at 115200.? So if it is, the internal unit doesn’t seem to be saddled with the problems of the external adapters.
Take care sir….. still love your tag-line. ? ? Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. ? ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Jeff Steinkamp via groups.io
Sent: Monday, May 12, 2025 14:10 PM
To: N3FJPSoftwareUsers <[email protected]>
Subject: Re: [N3FJPSoftwareUsers] Clicks when using ACLog? If you are communicating with the radio using serial parameters, then the converter is built into the radio. Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477 ------ Original Message ------ Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog Hey Jeff.
The IC-7610 is a direct USB cable.? No Serial to USB converters. ? Mike. ? ? ? I would recommend changing the baud rate down to 4800 or 9600 and set the polling rate to 1 second and see what happens.? With the small amount of data that is transfered for each poll.there really isn't a need for those faster baud rates? In my experience, especially with the USB to Serial converters, when using 8 bits, no parity and 1 stop bit, and no handshaking, baud rates above 9600 can become problematic though those converter drivers.? Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477 ------ Original Message ------ Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog I have?a 7610 here myself and can't hear anything like what Jim describes.? Our software just sends the poll rig command to Windows, which routes it to the selected com port and then listens for a response.?? ?I am by?no?means?a?hardware guy, so I really don't have?any insights on why that?would be occurring.??If anyone has any insights into Jim's question I would be grateful for your reply. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Sunday, May 11, 2025 at 12:45:15 PM EDT, Jim W1WIU via groups.io <jimg158@...> wrote: I just upgrade from an IC 7600 to an IC7610. Using the same LCU3-I-USB cable, Win 11, and downloaded the latest driver software. I just noticed that I can hear a click and see a "blip" on the Spectrum Scope when I hit the PPT in SSB mode that is in sync with the polling rate. If I change the rate, the blip also changes. This only happens in SSB. The audio blip is the same at 1 watt and 100 watts.? The blip on the Spectrum scope also does not increase as power goes up. I'm polling at 19.2 and .500 sec.? Any ideas as to cause ???
|
Re: Clicks when using ACLog
If you are communicating with the radio using serial parameters, then the converter is built into the radio.
Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477
------ Original Message ------
Date 5/12/2025 10:13:27
Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog
Hey Jeff.
The IC-7610 is a direct USB cable.? No Serial to USB converters. ? Mike. ? ? ? I would recommend changing the baud rate down to 4800 or 9600 and set the polling rate to 1 second and see what happens.? With the small amount of data that is transfered for each poll.there really isn't a need for those faster baud rates? In my experience, especially with the USB to Serial converters, when using 8 bits, no parity and 1 stop bit, and no handshaking, baud rates above 9600 can become problematic though those converter drivers.? Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477 ------ Original Message ------ Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog I have?a 7610 here myself and can't hear anything like what Jim describes.? Our software just sends the poll rig command to Windows, which routes it to the selected com port and then listens for a response.?? ?I am by?no?means?a?hardware guy, so I really don't have?any insights on why that?would be occurring.??If anyone has any insights into Jim's question I would be grateful for your reply. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Sunday, May 11, 2025 at 12:45:15 PM EDT, Jim W1WIU via groups.io <jimg158@...> wrote: I just upgrade from an IC 7600 to an IC7610. Using the same LCU3-I-USB cable, Win 11, and downloaded the latest driver software. I just noticed that I can hear a click and see a "blip" on the Spectrum Scope when I hit the PPT in SSB mode that is in sync with the polling rate. If I change the rate, the blip also changes. This only happens in SSB. The audio blip is the same at 1 watt and 100 watts.? The blip on the Spectrum scope also does not increase as power goes up. I'm polling at 19.2 and .500 sec.? Any ideas as to cause ???
|
Logging Time off in Network mode on AC log
I have been calling a net twice a week using AClog, but just discoverer Net mode.? Ran some testing and it would be very useful except that it does not log "time off if blank" like the main screen does.? Is there anyway to make it do so? TOM WA4GIM
|
Sorry, I meant to change the subject line.
Clear Skies
Brian D. Warner
Center for Solar System Studies
Please update your address book to use brian@... as my primary email. The MPO account will remain active for the time being but automatically forward emails to the new primary.
toggle quoted message
Show quoted text
----- Original Message ----- From: Brian Warner via groups.io [mailto:brian@...] To: < [email protected]>, < [email protected]> Sent: Mon, 12 May 2025 18:16:56 -0000 Subject: [N3FJPSoftwareUsers] Clicks when using ACLog I've designed a custom layout for my POTA days. The design work was done with display settings at 100% scaling and 1920x1080 resolution. The form was full screen. The first row of labels and entry fields are fine, but the second row has problems (see screen shot). For lack of a better description, the entry fields are "squooshed", i.e., too short and so all the text is not visible. I've tried moving the fields up/down, thinking that they were overlapping with the unshown "comments" entry field below. Looking at the efl file, there doesn't appear to be a way to set the height of the fields (I can understand why). Any suggestions for unsquooshing that second row? 73 and Clear Skies, Brian D. Warner WB0NWZ
|
I've designed a custom layout for my POTA days.
The design work was done with display settings at 100% scaling and 1920x1080 resolution. The form was full screen.
The first row of labels and entry fields are fine, but the second row has problems (see screen shot). For lack of a better
description, the entry fields are "squooshed", i.e., too short and so all the text is not visible.
I've tried moving the fields up/down, thinking that they were overlapping with the unshown "comments" entry field
below. Looking at the efl file, there doesn't appear to be a way to set the height of the fields (I can understand
why).
Any suggestions for unsquooshing that second row?
73 and Clear Skies,
Brian D. Warner
WB0NWZ
|
Re: Appearance of entry boxes
Ahhhhh….. that much I remember Scott.? It is which FILE and which parameter that is purged from my memory. ? Mike.? KD5KC. ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Scott Davis via groups.io
Sent: Monday, May 12, 2025 9:25 AM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] Appearance of entry boxes? Thanks for chiming in and the reminder.? Yes, that is another option.? With AC Log closed, open the efl file with a text editor and edit the locations to your preference. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Monday, May 12, 2025 at 09:51:57 AM EDT, Mike Olbrisch <mike-2025@...> wrote: I once had an issue like you are seeing, a separation or “gap” between the entry field LABEL and the entry field TEXT-BOX.? Scott replied and told me to go into one of the SETTINGS.ELF files and edit a number that set the screen component location.
It was easy to do.? Unfortunately, I do not remember it in my head….. and I can’t find that message with how to do it.? But it can be done.
骋辞辞诲-濒耻肠办……………. ? ? Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. ? ? ? ? I don't believe that is the solution to this problem. Look at the screen shot and you will see a rather large gap between the green 'County' box and the white dropdown box beneath it, where the county name goes.? Then the 'Grid' box has no space between the green and white box. And a smaller gap between the 'State' box and the white box.? Tab order makes no difference in what I am describing.?
|
Re: Clicks when using ACLog
Hey Jeff.
The IC-7610 is a direct USB cable.? No Serial to USB converters. ? Mike. ? ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Jeff Steinkamp via groups.io
Sent: Monday, May 12, 2025 9:10 AM
To: N3FJPSoftwareUsers <[email protected]>
Subject: Re: [N3FJPSoftwareUsers] Clicks when using ACLog? I would recommend changing the baud rate down to 4800 or 9600 and set the polling rate to 1 second and see what happens.? With the small amount of data that is transfered for each poll.there really isn't a need for those faster baud rates? In my experience, especially with the USB to Serial converters, when using 8 bits, no parity and 1 stop bit, and no handshaking, baud rates above 9600 can become problematic though those converter drivers.? Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477 ------ Original Message ------ Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog I have?a 7610 here myself and can't hear anything like what Jim describes.? Our software just sends the poll rig command to Windows, which routes it to the selected com port and then listens for a response.?? ?I am by?no?means?a?hardware guy, so I really don't have?any insights on why that?would be occurring.??If anyone has any insights into Jim's question I would be grateful for your reply. 开云体育 the Amateur Radio community with contesting and general logging software since 1997. 1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect... On Sunday, May 11, 2025 at 12:45:15 PM EDT, Jim W1WIU via groups.io <jimg158@...> wrote: I just upgrade from an IC 7600 to an IC7610. Using the same LCU3-I-USB cable, Win 11, and downloaded the latest driver software. I just noticed that I can hear a click and see a "blip" on the Spectrum Scope when I hit the PPT in SSB mode that is in sync with the polling rate. If I change the rate, the blip also changes. This only happens in SSB. The audio blip is the same at 1 watt and 100 watts.? The blip on the Spectrum scope also does not increase as power goes up. I'm polling at 19.2 and .500 sec.? Any ideas as to cause ???
|
Re: Controlling Antenna Switches and like items using UDP
Hi Chuck,
Thanks for your e-mail.? We have API functionality in all our software that any developer is welcome to use to interface with our programs, so please feel free to encourage the developer to go ahead using these specs here:
Additionally, PSTRotator interfaces with our software currently.? Details here:
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
Is there a setting for having N3FJP software (any of the contests and AC LOG) to send band data to an antenna switch for automatic control? The WA4MCM switches use UDP packets sent form software programs to determine which antenna is selected. Is this possible with the software packages?? It only needs to send the data, not receive.
?
Chuck K0XM
|
Re: Appearance of entry boxes
Hi Mike,
Thanks for chiming in and the reminder.? Yes, that is another option.? With AC Log closed, open the efl file with a text editor and edit the locations to your preference.
Enjoy!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I once had an issue like you are seeing, a separation or “gap” between the entry field LABEL and the entry field TEXT-BOX.? Scott replied and told me to go into one of the SETTINGS.ELF files and edit a number that set the screen component location.
It was easy to do.? Unfortunately, I do not remember it in my head….. and I can’t find that message with how to do it.? But it can be done.
骋辞辞诲-濒耻肠办……………. ?
Vy73 - Mike - KD5KC. El Paso, Texas - DM61rt. SOTA W5T-Texas Association Manager. ? ? ?
From: [email protected] <[email protected]> On Behalf Of Randy Buxton, W4IFI via groups.io
Sent: Monday, May 12, 2025 7:23 AM
To: [email protected]
Subject: Re: [N3FJPSoftwareUsers] Appearance of entry boxes ? I don't believe that is the solution to this problem. Look at the screen shot and you will see a rather large gap between the green 'County' box and the white dropdown box beneath it, where the county name goes.? Then the 'Grid' box has no space between the green and white box. And a smaller gap between the 'State' box and the white box.? Tab order makes no difference in what I am describing.?
|
Re: Clicks when using ACLog
I would recommend changing the baud rate down to 4800 or 9600 and set the polling rate to 1 second and see what happens.? With the small amount of data that is transfered for each poll.there really isn't a need for those faster baud rates.? In my experience, especially with the USB to Serial converters, when using 8 bits, no parity and 1 stop bit, and no handshaking, baud rates above 9600 can become problematic though those converter drivers.?
Jeff K. Steinkamp (N7YG)
Tucson, AZ
Scud Missile Coordinates
N32.2319 W110.8477
------ Original Message ------
Date 5/12/2025 03:23:26
Subject Re: [N3FJPSoftwareUsers] Clicks when using ACLog
Hi All,
I have?a 7610 here myself and can't hear anything like what Jim describes.? Our software just sends the poll rig command to Windows, which routes it to the selected com port and then listens for a response.??
?I am by?no?means?a?hardware guy, so I really don't have?any insights on why that?would be occurring.??If anyone has any insights into Jim's question I would be grateful for your reply.
Thanks in advance!
73, Scott N3FJP
开云体育 the Amateur Radio community with contesting and general logging software since 1997.
1 Peter 3 vs 15: Always be prepared to give an answer to everyone who asks you to give . But do this with gentleness and respect...
I just upgrade from an IC 7600 to an IC7610. Using the same LCU3-I-USB cable, Win 11, and downloaded the latest driver software.
I just noticed that I can hear a click and see a "blip" on the Spectrum Scope when I hit the PPT in SSB mode that is in sync with the polling rate. If I change the rate, the blip also changes. This only happens in SSB.
The audio blip is the same at 1 watt and 100 watts.? The blip on the Spectrum scope also does not increase as power goes up.
I'm polling at 19.2 and .500 sec.?
Any ideas as to cause ???
?
|
Ken KN2D
KB5ILY - Travis W. Burton
Fred wa4vxw
Mike Olbrisch
