Hi All,
Thanks Scott, Mike and Jeff for your inputs.
I can only hear it ansd see it when I press PPT or foot pedal, and do not talk.
Changing the baud rate and or the polling rate has no effect on the "blip".
I tried all combinations of both.
I'm getting the same results with both the Heil iCM and Heil ProSet Plus mics.,
using the PPT or foot pedal.
Changing either the RF power level, mic Gain, or Receive ATT has no effect.
Receive volume does increase the output audio in the headset.
I'm using the same LCU-3-I-USB cable (USB on computer end, .5mm at rig end ) that I used on the IC7600, and I did download the latest software version.?
Using USB Com Port 3 on Win 11 computer, to 3.5mm CI-V Remote jack on IC7610. The same set up I used with the IC7600.
One "good" observation is that it does not show , nor can I hear any "blip" in AM or FM mode, Only on USB and LSB ???
Still baffled and open to suggestions.
Thanks,
Jim? W1WIU
